BY396P

BY396P thru BY399P Vishay General Semiconductor Soft Recovery Fast Switching Plastic Rectifier FEATURES • Fast switching for high efficiency • Low forward voltage drop • Low leakage current • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC DO-201AD TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr IR VF TJ max. 3.0 A 100 V to 800 V 100 A 500 ns 10 μA 1.25 V 125 °C For use in fast switching rectification of power supply, inverters, converters and freewheeling diodes for consumer and telecommunication. Note • These devices are not AEC-Q101 qualified. MECHANICAL DATA Case: DO-201AD, molded epoxy body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end per MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5 mm) lead lengths at TA = 50 °C Peak forward surge current 10 ms single half sine-wave superimposed on rated load at TA= 50 °C Maximum repetitive peak forward surge at f < 15 kHz Operating junction temperature range Storage temperature range SYMBOL VRRM VRMS VDC IF(AV) IFSM IFRM TJ TSTG BY396P 100 70 100 BY397P 200 140 200 3.0 100 10 - 50 to + 125 - 50 to + 150 BY398P 400 280 400 BY399P 800 560 800 UNIT V V V A A A °C °C Document Number: 88542 Revision: 26-Oct-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 BY396P thru BY399P Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time Maximum forward recovery time Typical junction capacitance TEST CONDITIONS 3.0 A TA = 25 °C TA = 100 °C IF = 10 mA, IR = 10 mA, Irr = 1.0 mA 100 mA, dI/dt = 50 A/μs 4.0 V, 1 MHz SYMBOL VF IR trr tfr CJ BY396P BY397P 1.25 10 μA 500 500 1.0 28 ns μs pF BY398P BY399P UNIT V THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL RθJA (1) BY396P BY397P 22 BY398P BY399P UNIT °C/W Note (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length with both leads to heat sink ORDERING INFORMATION (Example) PREFERRED P/N BY398P-E3/54 BY398P-E3/73 UNIT WEIGHT (g) 1.1 1.1 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 1400 1000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 4.0 200 Average Forward Rectified Current (A) 3.0 2.0 Peak Forward Surge Current (A) Resistive or Inductive Load TA = 50 °C 10 ms Single Half Sine-Wave at Rated Load 100 1.0 0.375" (9.5 mm) Lead Length 0 0 20 40 60 80 100 120 140 10 1 10 100 Ambient Temperature (°C) Number of Cycles at 50 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 88542 Revision: 26-Oct-09 BY396P thru BY399P Vishay General Semiconductor 100 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 1 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle 0.1 Junction Capacitance (pF) 10 2.0 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 10 Instantaneous Reverse Current (μA) TJ = 100 °C 1 TJ = 50 °C 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 88542 Revision: 26-Oct-09 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1