BYM07-400

BYM07-50 thru BYM07-400, EGL34A thru EGL34G Vishay Semiconductors formerly General Semiconductor Surface Mount Glass Passivated Ultrafast Rectifier DO-213AA SOLDERABLE ENDS 1st BAND 2nd BAND d* Features ente Pat D1= 0.066 0.060 (1.676) (1.524) Reverse Voltage 50 to 400V Forward Current 0.5A D2 0.022 (0.559) 0.016 (0.406) 0.145 (3.683) 0.131(3.327) D2 = D1 + 0 - 0.008 (0.20) • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Capable of meeting environmental standards of MIL-S-19500 • High temperature metallurgically bonded construction • Cavity-free glass passivated junction • Fast switching for high efficiency • High temperature soldering guaranteed: 450°C/5 seconds at terminals. Complete device submersible temperature of 260°C for 10 seconds in solder bath Mechanical Data Dimensions in inches and (millimeters) 1st band denotes type and polarity 2nd band denotes voltage type ® *Glass-plastic encapsulation is covered by Patent No. 3,996,602 and brazed-lead assembly to Patent No. 3,930,306 Case: JEDEC DO-213AA, molded plastic over glass body Terminals: Plated terminals, solderable per MIL-STD-750, Method 2026 Polarity: Two bands indicate cathode end – 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Mounting Position: Any Weight: 0.0014 oz., 0.036 g Ratings at 25°C ambient temperature unless otherwise specified. Maximum Ratings & Thermal Characteristics Parameter Fast efficient device: 1st band is Green Polarity color bands (2nd Band) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TT = 75°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum full load reverse current, full cycle average at TA = 55°C Maximum thermal resistance (Note 1, 2) Operating junction and storage temperature range VRRM VRMS VDC IF(AV) IFSM IR(AV) RΘJA RΘJT TJ,TSTG EGL34A Symbol BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 EGL34B EGL34C EGL34D EGL34F EGL34G Unit Gray 50 35 50 Red 100 70 100 Pink 150 105 150 Orange Brown Yellow 200 140 200 0.5 10 50 300 210 300 400 280 400 V V V A A µA °C/W °C 150 70 – 65 to +175 Electrical Characteristics Parameter Maximum DC reverse current at rated DC blocking voltage Ratings at 25°C ambient temperature unless otherwise specified. Symbol BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 EGL34A EGL34B EGL34C EGL34D EGL34F EGL34G Unit TA = 25°C TA = 125°C IR VF trr CJ 5.0 50 1.25 50 7.0 1.35 µA V ns pF Maximum instantaneous forward voltage at 0.5A Max. reverse recovery time at IF = 0.5A, IR = 1.0A, Ir r= 0.25A Typical junction capacitance at 4.0V, 1MHz Notes: (1) Thermal resistance from junction to ambient, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24 x 0.24” (6.0 x 6.0mm) copper pads to each terminal Document Number 88580 03-Apr-03 www.vishay.com 1 BYM07-50 thru BYM07-400, EGL34A thru EGL34G Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25°C unless otherwise noted) Fig. 1 – Forward Current Derating Curve 0.5 12 Fig. 2 – Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) 10 8.0 TJ = TJ max. 8.3ms Single Half Sine-Wave (JEDEC Method) Average Forward Rectified Current (A) 0.4 0.3 6.0 0.2 Resistive or Inductive Load 0.1 4.0 2.0 0 0 0 25 50 75 100 125 150 175 1 10 100 Terminal Temperature (°C) Number of Cycles at 60 HZ Fig. 3 – Typical Instantaneous Forward Characteristics Instantaneous Forward Current (A) Pulse Width = 300µs 1% Duty Cycle TJ = 150°C Fig. 4 – Typical Reverse Characteristics Instantaneous Reverse Leakage Current (µA) 100 50 10 10 TJ = 150°C 1 TJ = 125°C 1 TJ = 25°C 0.1 TJ = 75°C TJ = 25°C 0.1 EGL34A – EGL34D EGL34F & EGL34G 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0.01 0.01 0.2 0.001 0 20 40 60 80 100 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%) 35 30 Fig. 5 – Typical Junction Capacitance Transient Thermal Impedance (°C/W) TJ = 25°C f = 1.0 MHZ Vsig = 50mVp-p 100 Fig. 6 – Typical Transient Thermal Impedance Junction Capacitance (pF) 25 20 15 10 5 0 0.1 10 1 1 10 100 0.1 0.01 0.1 1 10 100 Reverse Voltage (V) www.vishay.com 2 t, Pulse Duration (sec.) Document Number 88580 03-Apr-03