BYM11-1000

BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor Surface Mount Glass Passivated Junction Fast Switching Rectifier FEATURES • Superectifier structure for high reliability condition • Patented glass-plastic encapsulation technique • Ideal for automated placement • Fast switching for high efficiency • Low leakage current • High forward surge capability • Meets environmental standard MIL-S-19500 • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in fast switching rectification of power supply, inverters, converters, and freewheeling diodes for consumer, automotive and telecommunication. 1.0 A 50 V to 1000 V 30 A 150 ns, 250 ns, 500 ns 1.3 V 175 °C ® d* ente Pat *Glass-plastic encapsulation is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 DO-213AB PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. MECHANICAL DATA Case: DO-213AB, molded epoxy over glass body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER FAST SWITCHING TIME DEVICE: 1ST BAND IS RED Polarity color bands (2nd band) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TT = 55 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Maximum full load reverse current, full cycle average at TA = 55 °C Operating junction and storage temperature range Document Number: 88547 Revision: 11-Apr-08 VRRM VRMS VDC IF(AV) IFSM IR(AV) TJ, TSTG SYMBOL BYM 11-50 BYM 11-100 BYM 11-200 BYM 11-400 BYM 11-600 RGL41J Green 600 420 600 BYM 11-800 BYM 11-1000 UNIT RGL41A RGL41B RGL41D RGL41G Gray 50 35 50 Red 100 70 100 Orange 200 140 200 Yellow 400 280 400 1.0 30 50 - 65 to + 175 RGL41K RGL41M Blue 800 560 800 Violet 1000 700 1000 V V V A A µA °C For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time Typical junction capacitance TEST CONDITIONS SYMBOL BYM 11-50 BYM 11-100 BYM 11-200 BYM 11-400 1.3 BYM 11-600 BYM 11-800 BYM 11-1000 UNIT 1.0 A VF V TA= 25 °C TA= 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz IR 5.0 50 150 15 250 500 µA trr CJ ns pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum thermal resistance Notes: (1) Thermal resistance from junction to ambient, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal SYMBOL RθJA RθJT BYM 11-50 BYM 11-100 BYM 11-200 BYM 11-400 75 (1) 30 (2) BYM 11-600 BYM 11-800 BYM 11-1000 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N RGL41J-E3/96 RGL41J-E3/97 BYM11-600-E3/96 BYM11-600-E3/97 RGL41JHE3/96 (1) UNIT WEIGHT (g) 0.114 0.114 0.114 0.114 0.114 0.114 0.114 0.114 REFERRED PACKAGE CODE 96 97 96 97 96 97 96 97 BASE QUANTITY 1500 5000 1500 5000 1500 5000 1500 5000 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel RGL41JHE3/97 (1) BYM11-600HE3/ 96 (1) BYM11-600HE3/97 Note: (1) (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88547 Revision: 11-Apr-08 BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.25 10 Average Forward Rectified Current (A) 1.00 Instantaneous Reverse Current (µA) Resistive or Inductive Load 1 0.75 TJ = 100 °C 0.50 0.1 0.25 TJ = 25 °C 0.01 0 20 40 60 80 100 0 25 50 75 100 125 150 175 Terminal Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Characteristics 30 100 TJ = TJ Max. 8.3 ms Single Half Sine-Wave TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Peak Forward Surge Current (A) 25 20 Junction Capacitance (pF) 1 10 100 10 15 10 0 1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 5. Typical Junction Capacitance 10 100 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) Mounted on 0.20 x 0.27" (5 x 7 mm) Copper Pad Areas 1 10 0.1 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle 1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Typical Transient Thermal Impedance Document Number: 88547 Revision: 11-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 BYM11-50 thru BYM11-1000, RGL41A thru RGL41M Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB Solderable Ends Mounting Pad Layout 0.138 (3.5) MAX. 1st Band 0 D2 = D1 + 0.008 (0.20) - D2 D1 = 0.105 (2.67) 0.095 (2.41) 0.118 (3.0) MIN. 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.022 (0.56) 0.018 (0.46) 0.049 (1.25) MIN. 0.238 (6.0) REF. 1st band denotes type and positive end (cathode) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88547 Revision: 11-Apr-08 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1