BYM12-50 thru BYM12-400, EGL41A thru EGL41G
Vishay General Semiconductor
Surface Mount Glass Passivated Ultrafast Rectifier
FEATURES
• Superectifier structure for high reliability condition • Cavity-free glass-passivated junction • Ideal for automated placement • Ultrafast reverse recovery time • Low switching losses, high efficiency • High forward surge capability • Meets environmental standard MIL-S-19500
SUPERECTIFIER®
DO-213AB (GL41)
• Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication.
1.0 A 50 V to 400 V 30 A 50 ns 1.0 V, 1.25 V 175 °C
PRIMARY CHARACTERISTICS
IF(AV) VRRM IFSM trr VF TJ max.
MECHANICAL DATA
Case: DO-213AB, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER FAST EFFICIENT DEVICE: 1ST BAND IS GREEN Polarity color bands (2nd band) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TT = 75 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM VRMS VDC IF(AV) IFSM TJ, TSTG SYMBOL BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400 EGL41A Gray 50 35 50 EGL41B Red 100 70 100 EGL41C Pink 150 105 150 1.0 30 - 65 to + 175 EGL41D Orange 200 140 200 EGL41F Brown 300 210 300 EGL41G Yellow 400 280 400 V V V A A °C UNIT
Document Number: 88581 Revision: 15-Mar-11
For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM12-50 thru BYM12-400, EGL41A thru EGL41G
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER Max. instantaneous forward voltage Max. DC reverse current at rated DC blocking voltage Max. reverse recovery time Typical junction capacitance BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400 TEST SYMBOL UNIT CONDITIONS EGL41A EGL41B EGL41C EGL41D EGL41F EGL41G 1.0 A TA = 25 °C TA = 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz VF (1) IR (1) 1.0 5.0 μA 50 50 20 14 ns pF 1.25 V
trr CJ
Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER Maximum thermal resistance SYMBOL RJA (1) RJT (2) BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400 EGL41A EGL41B EGL41C 60 30 EGL41D EGL41F EGL41G UNIT °C/W
Notes Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
(1)
ORDERING INFORMATION (Example)
PREFERRED P/N EGL41D-E3/96 EGL41D-E3/97 EGL41DHE3/96 (1) EGL41DHE3/97
(1)
UNIT WEIGHT (g) 0.114 0.114 0.114 0.114
PREFERRED PACKAGE CODE 96 97 96 97
BASE QUANTITY 1500 5000 1500 5000
DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel
Note (1) AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 C unless otherwise noted)
1.0 30
Average Forward Rectified Current (A)
Peak Forward Surge Current (A)
25
TJ = TJ Max. 8.3 ms Single Half Sine-Wave
20
0.5
15
10
Resistive or Inductive Load
5.0
0 0 25 50 75 100 125 150 175
0 1 10 100
Lead Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Maximum Forward Current Derating Curve www.vishay.com 2
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
For technical questions within your region, please contact one of the following: Document Number: 88581 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 15-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYM12-50 thru BYM12-400, EGL41A thru EGL41G
Vishay General Semiconductor
50
70 Pulse Width = 300 µs 1 % Duty Cycle 60 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p
Instantaneous Forward Current (A)
10
TJ = 150 °C
Junction Capacitance (pF)
50 40 30 20 10 0 EGL41A thru EGL41D EGL41F thru EGL41G 0.1 1 10 100
1
TJ = 25 °C
0.1 EGL41A thru EGL41D EGL41F thru EGL41G 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
1000
100
100 TJ = 150 °C 10 TJ = 100 °C
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Leakage Current (µA)
10
1
1
0.1 TJ = 25 °C 0.01 0 20 40 60 80 100
0.1 0.01
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Leakage Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-213AB (GL41) Mounting Pad Layout
Solderable Ends 1 Band
st
D2 = D1 + 0 - 0.008 (0.20)
0.138 (3.5) MAX.
D2
D1 = 0.105 0.095 (2.67) (2.41)
0.118 (3.0) MIN.
0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7)
0.022 (0.56) 0.018 (0.46)
0.049 (1.25) MIN. 0.238 (6.0) REF.
1st Band Denotes Type and Positive End (Cathode)
Document Number: 88581 Revision: 15-Mar-11
For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1
