BYT28-400

BYT28, BYT28F, BYT28B, UG10GCT, UGF10GCT, UGB10GCTSeries Vishay Semiconductors formerly General Semiconductor Dual Ultrafast Soft Recovery Rectifier Reverse Voltage 300 to 400V Forward Current 10A Reverse Recovery Time 35ns ITO-220AB (BYT28F, UGF10 Series) 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.370 (9.40) 0.360 (9.14) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.410 (10.41) 0.390 (9.91) 1 0.160 (4.06) 0.140 (3.56) PIN 2 3 0.603 (15.32) 0.573 (14.55) 1 TO-220AB (BYT28, UG10 Series) 0.415 (10.54) MAX. 0.140 (3.56) DIA. 0.130 (3.30) 0.131 (3.39) DIA. 0.122 (3.08) 0.055 (1.39) 0.045 (1.14) 0.600 (15.5) 0.580 (14.5) PIN 2 3 0.676 (17.2) 0.646 (16.4) 0.350 (8.89) 0.330 (8.38) 0.635 (16.13) 0.625 (15.87) 0.350 (8.89) 0.330 (8.38) 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.060 (1.52) PIN 1 PIN 3 PIN 2 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.110 (2.80) 0.100 (2.54) PIN 1 PIN 3 PIN 2 CASE 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.69) 0.022 (0.55) 0.014 (0.36) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) TO-263AB (BYT28B, UGB10 Series) 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout TO-263AB 0.42 (10.66) 0.245 (6.22) MIN K 0.055 (1.40) 0.047 (1.19) 0.624 (15.85) 1 K 2 0.591 (15.00) 0-0.01 (0-0.254) 0.110 (2.79) 0.090 (2.29) 0.037 (0.940) 0.027 (0.686) PIN 1 PIN 2 K - HEATSINK 0.33 (8.38) 0.63 (17.02) Dimensions in inches and (millimeters) 0.360 (9.14) 0.320 (8.13) 0.021 (0.53) 0.014 (0.36) 0.140 (3.56) 0.110 (2.79) 0.08 (2.032) 0.24 (6.096) 0.12 (3.05) 0.105 (2.67) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) Mechanical Data Case: JEDEC TO-220AB, ITO-220AB & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 oz., 2.24 g Features • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for free wheeling diode power factor correction applications • Soft recovery characteristics • Excellent high temperature switching • Optimized to reduce switching losses • High temperature soldering guaranteed: 250°C/10 seconds at terminals • Glass passivated chip junction www.vishay.com 1 Document Number 88552 15-Apr-02 BYT28, BYT28F, BYT28B, UG10GCT, UGF10GCT, UGB10GCTSeries Vishay Semiconductors formerly General Semiconductor Maximum Ratings Parameter (TC = 25°C unless otherwise noted) UG10FCT Symbol VRRM VRWM VRMS VDC BYT28-300 300 300 210 300 10 5 60 UG10GCT BYT28-400 400 400 280 400 V A Unit V V Maximum repetitive peak reverse voltage Maximum working reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC = 100°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg Operating junction and storage temperature range RMS Isolation voltage (BYT28F, UGF types) from terminals to heatsink with t = 1 second, RH ≤ 30% total device per leg IF(AV) IFSM TJ, TSTG VISOL A °C V –40 to +150 4500 3500(2) 1500(3) (1) Electrical Characteristics (T Parameter C = 25°C unless otherwise noted) Symbol (4) Value 1.30 1.40 1.05 10 200 35 50 3.0 50 Unit Maximum instantaneous forward voltage per leg at IF = 5A, TJ = 25°C at IF = 10A, TJ = 25°C at IF = 5A, TJ = 150°C Maximum reverse current per leg at VRRM Maximum reverse recovery time per leg at IF = 0.5A, IR = 1.0A, Irr = 0.25A Maximum reverse recovery time per leg at IF = 1.0A, di/dt = 100A/µs, VR = 30V, Irr = 0.1 IRM Maximum reverse recovery current per leg at IF = 5A, di/dt = 50A/µs, VR = 30V, TC = 100°C Maximum stored charge per leg IF = 2A, di/dt = 20A/µs, VR = 30V, Irr = 0.1 IRM TJ = 25°C TJ = 100°C VF V IR trr trr IRM Qrr µA ns ns A nC Thermal Characteristics (T Parameter C = 25°C unless otherwise noted) UG10 BYT28 4.5 UGF10 BYT28F 6.7 UGB10 BYT28B 4.5 Unit °C/W Symbol RΘJC Typical thermal resistance junction to case Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset (2) Clip mounting (on case), where leads do overlap heatsink (3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.19”) (4) Pulse test: 300µs pulse width, 1% duty cycle www.vishay.com 2 Document Number 88552 15-Apr-02 BYT28, BYT28F, BYT28B, UG10GCT, UGF10GCT, UGB10GCTSeries Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25°C unless otherwise noted) Fig 1 — Forward Current Derating Curve 15 Resistive or Inductive Load 100 Fig 2 — Maximum Non-Repetitive Peak Forward Surge Current Per Leg Peak Forward Surge Current (A) TC = 105°C 8.3ms Single Half Sine-Wave (JEDEC Method) Average Forward Current (A) 10 10 5 0 1 0 50 100 150 1 10 100 Case Temperature (°C) Number of Cycles at 60 HZ Fig 3 —Typical Instantaneous Forward Characteristics Per Leg Pulse Width = 300µs 1% Duty Cycle 10 Fig 4 — Typical Reverse Characteristics Per Leg IR – Instantaneous Reverse Current (µA) 1000 IF – Instantaneous Forward Current (A) 100 TJ = 125°C 100 TJ = 100°C 1.0 TJ = 125°C TJ = 100°C 10 0.1 TJ = 25°C 1.0 TJ = 25°C 0.1 20 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 40 60 80 100 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%) Fig 5 — Reverse Switching Characteristics Per Leg Stored Charge/Reverse Recovery Time (nC/ns) 120 100 Fig 6 — Typical Junction Capacitance Per Leg TJ = 125°C f = 1.0 MHZ Vsig = 50MVp-p @5A, 50A/µs 80 60 40 @2A, 20A/µs @5A, 50A/µs @1A, 100A/µs pF – Junction Capacitance 125 100 10 20 @2A, 20A/µs 0 25 50 75 100 trr Qrr 1 0.1 1 10 100 Junction Temperature (°C) Document Number 88552 15-Apr-02 Reverse Voltage (V) www.vishay.com 3