BYW29-200

BYW(F,B)29-50 thru BYW(F,B)29-200 Vishay General Semiconductor Ultrafast Rectifier TO-220AC ITO-220AC 2 BYW29 Series PIN 1 PIN 2 2 1 BYWF29 Series PIN 1 1 CASE PIN 2 TO-263AB K FEATURES • Glass passivated chip junction • Ultrafast recovery time • Low switching losses, high efficiency • Low forward voltage drop • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AC and ITO-220AC package) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, dc-to-dc converters, and other power switching application. MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum 2 1 BYWB29 Series PIN 1 PIN 2 K HEATSINK PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 8.0 A 50 V to 200 V 100 A 25 ns 0.8 V 150 °C MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC = 105 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min SYMBOL VRRM VRMS VDC IF(AV) IFSM TJ, TSTG VAC BYW29-50 50 35 50 BYW29-100 100 70 100 8.0 100 - 65 to + 150 1500 BYW29-150 150 105 150 BYW29-200 200 140 200 UNIT V V V A A °C V Document Number: 88560 Revision: 07-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 BYW(F,B)29-50 thru BYW(F,B)29-200 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time Typical junction capacitance Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle TEST CONDITIONS IF = 2 0 A IF = 8.0 A TJ = 25 °C TJ = 150 °C TC = 25 °C TC = 100 °C IF = 1 A, VR = 30 V, dI/dt = 100 A/µs, Irr = 10 % IRM 4.0 V, 1 MHz SYMBOL VF BYW29-50 BYW29-100 BYW29-150 BYW29-200 UNIT V 1.3 0.8 10 500 25 45 IR µA trr CJ ns pF THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case per leg SYMBOL RθJC BYW 2.5 BYWF 5.5 BYWB 2.5 UNIT °C/W ORDERING INFORMATION (Example) PACKAGE TO-220AC ITO-220AC TO-263AB TO-263AB TO-220AC ITO-220AC TO-263AB TO-263AB Note: (1) Automotive grade AEC Q101 qualified PREFERRED P/N BYW29-200-E3/45 BYWF29-200-E3/45 BYWB29-200-E3/45 BYWB29-200-E3/81 BYW29-200HE3/45 (1) BYWF29-200HE3/45 (1) BYWB29-200HE3/45 (1) UNIT WEIGHT (g) 1.80 1.95 1.77 1.77 1.80 1.95 1.77 1.77 PACKAGE CODE 45 45 45 81 45 45 45 81 BASE QUANTITY 50/tube 50/tube 50/tube 800/reel 50/tube 50/tube 50/tube 800/reel DELIVERY MODE Tube Tube Tube Tape and reel Tube Tube Tube Tape and reel BYWB29-200HE3/81 (1) www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88560 Revision: 07-Nov-07 BYW(F,B)29-50 thru BYW(F,B)29-200 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 100 Average Forward Rectified Current (A) Instantaneous Reverse Leakage Current (µA) Resistive or Inductive Load 8 TJ = 125 °C 10 TJ = 100 °C 1 6 4 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 2 0 0 25 50 75 100 125 150 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Maximum Forward Current Derating Curve Figure 4. Typical Reverse Leakage Charateristics 100 80 Peak Forward Surge Current (A) 80 Junction Capacitance (pF) 1 10 100 70 60 60 50 40 40 20 30 0 20 0.1 1 10 100 Number of Cycles at 50 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 5. Typical Junction Capacitance 100 Instantaneous Forward Current (A) 10 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Charateristics Document Number: 88560 Revision: 07-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 BYW(F,B)29-50 thru BYW(F,B)29-200 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) PIN 1 PIN 2 CASE ITO-220AC 0.404 (10.26) 0.384 (9.75) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 45° REF. 0.671 (17.04) 0.651 (16.54) PIN 0.076 (1.93) REF. 0.076 (1.93) REF. 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.603 (15.32) 0.573 (14.55) 0.600 (15.24) 0.580 (14.73) 7° REF. 0.350 (8.89) 0.330 (8.38) PIN 1 2 0.191 (4.85) 0.171 (4.35) 7° REF. 2 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.025 (0.64) 0.015 (0.38) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) 0.33 (8.38) MIN. 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88560 Revision: 07-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1