CNY65ABST

CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Very High Isolation Voltage Top View CNY64ST FEATURES C A CNY65ST C E V DE 17187-6 17187-5 • Rated recurring peak voltage (repetitive) VIORM = 1450 Vpeak • Thickness through insulation ≥ 3 mm • Creepage current resistance according to VDE 0303/IEC 60112 comparative tracking index: CTI ≥ 475 • Moisture sensitivity level MSL4 - Follow defined storage and soldering requirements • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC Note ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 DESCRIPTION The CNY6XST, the high isolation voltage SMD version optocouplers consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4 pin plastic package. The single components are mounted opposite one another, providing a distance between input and output for highest safety requirements of > 3 mm. APPLICATIONS • Solar and wind power diagnostic, monitoring, and communication equipment • Welding equipment • High voltage motors • Switch-mode power supplies • Line receiver • Computer peripheral interface • Microprocessor system interface • Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): - for appl. class I to IV at mains voltage ≤ 300 V - for appl. class I to IV at mains voltage ≤ 600 V - for appl. class I to III at mains voltage ≤ 1000 V according to DIN EN 60747-5-2 (VDE 0884) VDE STANDARDS These couplers perform safety functions according to the following equipment standards: • DIN EN 60747-5-2 (VDE 0884) Optocoupler for electrical safety requirements • IEC 60065 Safety for mains-operated household apparatus electronic and related • VDE 0160 Electronic equipment for electrical power installation AGENCY APPROVALS • DIN EN 60747-5-2 (VDE 0884) (pending) • UL1577, file no. E76222 system code H, J, and K (pending) • VDE related features: - rated impulse voltage (transient overvoltage), VIOTM = 12 kVpeak - isolation test voltage (partial discharge test voltage), Vpd = 2.8 kVpeak ORDERING INFORMATION CNY64ST CNY65ST C N Y 6 # PACKAGE OPTION X X X CTR BIN S T PART NUMBER 10.16 mm 15.24 mm AGENCY CERTIFIED/PACKAGE UL, VDE SMD-4 HV, 400 mil high isolation distance SMD-4 HV, 600 mil high isolation distance Rev. 1.0, 20-Sep-11 50 to 300 CNY64ST CNY65ST 50 to 150 CNY64AYST CNY65AYST CTR (%) 5 mA 80 to 240 CNY64ABST CNY65ABST 100 to 300 CNY64AGRST CNY65AGRST Document Number: 82387 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST www.vishay.com Vishay Semiconductors TEST CONDITION SYMBOL VR IF tp ≤ 10 μs IFSM Pdiss Tj VCEO VECO IC tp/T = 0.5, tp ≤ 10 ms ICM Pdiss Tj t = 1 min t=1s VISO VISO Ptot Tamb Tstg 2 mm from case, ≤ 10 s Tsld VALUE 5 75 1.5 120 100 32 7 50 100 130 100 8.2 13.9 250 - 55 to + 85 - 55 to + 100 260 UNIT V mA A mW °C V V mA mA mW °C kVRMS kV mW °C °C °C ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER INPUT Reverse voltage Forward current Forward surge current Power dissipation Junction temperature OUTPUT Collector emitter voltage Emitter collector voltage Collector current Collector peak current Power dissipation Junction temperature COUPLER AC isolation test voltage CNY64AxxxST DC isolation test voltage CNY65AxxxST Total power dissipation Ambient temperature range Storage temperature range Soldering temperature Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER INPUT Forward voltage Junction capacitance OUTPUT Collector emitter voltage Emitter collector voltage Collector emitter leakage current COUPLER Collector emitter saturation voltage Cut-off frequency Coupling capacitance IF = 10 mA, IC = 1 mA VCE = 5 V, IF = 10 mA, RL = 100 Ω f = 1 MHz VCEsat fc Ck 110 0.3 0.3 V kHz pF IC = 1 mA IE = 100 μA VCE = 20 V, IF = 0 mA VCEO VECO ICEO 32 7 200 V V nA IF = 50 mA VR = 0, f = 1 MHz VF Cj 1.32 50 1.6 V pF TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Rev. 1.0, 20-Sep-11 Document Number: 82387 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST www.vishay.com Vishay Semiconductors TEST CONDITION PART CNY64ST CNY65ST CNY64AYST CNY65AYST CNY64ABST CNY65ABST CNY64AGRST CNY65AGRST SYMBOL CTR CTR CTR CTR CTR CTR CTR CTR MIN. 50 50 50 50 80 80 100 100 TYP. MAX. 300 300 150 150 240 240 300 300 UNIT % % % % % % % % CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER IC/IF VCE = 5 V, IF = 5 mA SAFETY AND INSULATION PARAMETERS PARAMETER Partial discharge test voltage routine test Partial discharge test voltage lot test (sample test) TEST CONDITION 100 %, ttest = 1 s tTr = 60 s, ttest = 10 s, (see figure 2) VIO = 500 V, Tamb = 25 °C Insulation resistance VIO = 500 V, Tamb = 100 °C VIO = 500 V, Tamb = 150 °C (construction test only) Forward current Power dissipation Rated impulse voltage Safety temperature Tracking resistance (comparative tracking index) Minimum external tracking (creepage distance) Insulation group IVa Measured from input pins to output pins CNY64ST CNY65ST PART SYMBOL Vpd Vpd RIO RIO RIO Isi Pso VIOTM Tsi CTI 475 ≥ 9.5 ≥ 14 mm mm MIN. 2.8 2.2 1012 1011 109 120 250 12 150 TYP. MAX. UNIT kV kV Ω Ω Ω mA mW kV °C Note • According to DIN EN 60747-5-2 (see figure 2). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. 250 225 200 175 150 125 100 75 50 25 0 0 22292 VIOTM Pso (mW) t1, t2 t3 , t4 ttest tstres Vpd VIOWM VIORM = 1 s to 10 s =1s = 10 s = 12 s Isi (mA) 0 25 50 75 100 125 150 175 200 t3 ttest t4 t1 tTr = 60 s t2 t stres t Tamb (°C) Fig. 1 - Safety Derating Diagram 13930 Fig. 2 - Test Pulse Diagram for Sample Test According to DIN EN 60747-5-2 (VDE 0884); IEC60747-5-5 Rev. 1.0, 20-Sep-11 Document Number: 82387 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST www.vishay.com Vishay Semiconductors TEST CONDITION SYMBOL td tr tf ts ton toff ton toff MIN. TYP. 2.6 2.4 2.7 0.3 5 3 25 42.5 MAX. UNIT μs μs μs μs μs μs μs μs SWITCHING CHARACTERISTICS PARAMETER Delay time Rise time Fall time Storage time Turn-on time Turn-off time Turn-on time Turn-off time VS = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) VS = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) VS = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) VS = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) VS = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) VS = 5 V, IC = 5 mA, RL = 100 Ω, (see figure 3) VS = 5 V, IF = 10 mA, RL = 1 kΩ, (see figure 4) VS = 5 V, IF = 10 mA, RL = 1 kΩ, (see figure 4) IF 0 IF IF +5V IC = 5 mA; adjusted through input amplitude 0 IC 100 % 90 % tp t RG = 50 tp = 0.01 T tp = 50 µs Channel I Channel II 50 100 Oscilloscope RL 1 M CL 20 pF 10 % 0 tr td t on tp td tr t on (= td + tr) Pulse duration Delay time Rise time Turn-on time ts tf t off t 95 10900 ts tf t off (= ts + tf) Storage time Fall time Turn-off time 96 11698 Fig. 3 - Test Circuit, Non-Saturated Operation Fig. 5 - Switching Times IF 0 I F = 10 mA +5V IC R G = 50 Ω tp = 0.01 T t p = 50 µs Channel I Channel II 50 Ω 95 10843 1 kΩ Oscilloscope R L ≥ 1 MΩ C L ≤ 20 pF Fig. 4 - Test Circuit, Saturated Operation Rev. 1.0, 20-Sep-11 Document Number: 82387 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST www.vishay.com TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Vishay Semiconductors Ptot - Total Power Dissipation (mW) 280 240 Coupled device 200 160 Phototransistor 120 IR-diode 80 40 0 0 25 50 75 100 30 IC - Collector Current (mA) IF = 25 mA 25 20 15 10 IF = 5 mA IF = 10 mA 5 IF = 1 mA IF = 2 mA 0 0 22509 0.1 0.2 0.3 0.4 0.5 22293 Tamb - Ambient Temperature (°C) VCE - Collector Emitter Voltage (sat) (V) Fig. 6 - Total Power Dissipation vs. Ambient Temperature Fig. 9 - Collector Current vs. Collector Emitter Voltage 100 1000 IF - Forward Current (mA) ICEO - Leakage Current (nA) IF = 0 100 10 1 0.1 VCE = 40 V 0.01 - 55 - 35 - 15 5 25 10 Tamb = - 55 °C Tamb = - 40 °C Tamb = 0 °C Tamb = 25 °C 1 Tamb = 50 °C Tamb = 75 °C Tamb = 85 °C VCE = 12 V VCE = 24 V 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 45 65 85 VF - Forward Voltage (V) Fig. 7 - Forward Current vs. Forward Voltage Tamb - Ambient Temperature (°C) Fig. 10 - Leakage Current vs. Ambient Temperature 45 1.2 IF = 30 mA IC - Collector Current (mA) 40 35 30 25 20 15 10 5 0 0 2 NCTR - Normalized CTR (sat) VCE = 0.4 V IF = 10 mA 1.0 IF = 5 mA 0.8 0.6 IF = 1 mA IF = 20 mA IF = 15 mA IF = 10 mA IF = 5 mA 0.4 0.2 0 - 55 - 40 - 20 4 6 8 10 12 0 20 40 60 85 22508 VCE - Collector Emitter Voltage (NS) (V) Tamb - Ambient Temperature (°C) Fig. 11 - Normalized CTR (sat) vs. Ambient Temperature Fig. 8 - Collector Current vs. Collector Emitter Voltage (NS) Rev. 1.0, 20-Sep-11 Document Number: 82387 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST www.vishay.com Vishay Semiconductors 1.2 1000 VCE = 5 V IF = 10 mA IF = 5 mA VCE = 5 V NCTR - Normalized CTR (NS) 1.0 0.6 IF = 1 mA 0.4 0.2 0 - 55 - 40 - 20 FCTR (kHz) 60 85 0.8 100 10 1 0 20 40 0.1 22515 1 10 100 Tamb - Ambient Temperature (°C) Fig. 12 - Normalized CTR (NS) vs. Ambient Temperature IC - Collector Current (mA) Fig. 15 - FCTR vs. Collector Current 1.4 20 VCE = 5 V Tamb = 25 °C Tamb = 0 °C Tamb = 50 °C NCTR - Normalized CTR (NS) 1.2 1.0 0.8 0.6 0.4 0.2 0 0.1 1 0 - 20 - 40 - 60 - 80 - 100 - 120 - 140 - 160 - 180 VCE = 5 V Tamb = - 40 °C Tamb = - 55 °C Tamb = 75 °C Tamb = 85 °C Phase (deg) 10 100 22516 1 10 100 1000 IF - Forward Current (mA) Fig. 13 - Normalized CTR (NS) vs. Forward Current Frequency (kHz) Fig. 16 - FCTR vs. Phase Angle 1.2 NCTR - Normalized CTR (sat) ton, toff - Switching Time (μs) VCE = 0.4 V Tamb = 25 °C Tamb = 0 °C 1000 VCE = 5 V, IF = 10 mA 100 toff 1.0 0.8 0.6 0.4 0.2 0 0.1 Tamb = 50 °C Tamb = - 40 °C Tamb = - 55 °C Tamb = 75 °C Tamb = 85 °C 10 ton 1 0.1 1 10 100 22517 0.1 1 10 100 IF - Forward Current (mA) Fig. 14 - Normalized CTR (sat) vs. Forward Current RL - Load Resistance (kΩ) Fig. 17 - Switching Time vs. Load Resistance Rev. 1.0, 20-Sep-11 Document Number: 82387 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST www.vishay.com SOLDERING GUIDLINES Soldering Condition The CNY64AxST, CNY65AxST are lead (Pb)-free devices. They are suitable for reflow soldering. However due to large package size, the peak package body temperature should not go above 245 °C. 300 250 Vishay Semiconductors Floor Life Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: Floor life: 72 h Conditions: Tamb < 30 °C, RH < 60 % Moisture sensitivity level 4, according to J-STD-020. Drying In case of moisture absorption devices should be baked before soldering according to the recommended conditions shown below 48 h at 125 °C ± 5 °C, RH < 5% (Not suitable for tape and reel) In case the floor time has not exceeded 10 days the units can be baked in tape and reel according to the following conditions 168 h at 60 °C ± 5 °C, RH < 5 % (Not suitable, if the floor time was exceeded by more than 10 days, or the allowed factory condition is exceeded) Temperature (°C) 240 °C 217 °C max. 20 s 245 °C 200 150 max. 120 s 100 max. ramp down 6 °C/s 50 0 0 50 max. ramp up 3 °C/s max. 2 cycles allowed 100 150 200 250 300 max. 100 s 22550 Time (s) Drypack Devices are packed in moisture barrier bags (MBB) to prevent moisture absorption during transportation and storage. Each bag contains a desiccant bag. PACKAGE DIMENSIONS in millimeters FOR CNY64AxxxST 14.4 ± 0.3 7.2 ± 0.2 6 ± 0.2 12.8 ± 0.2 7.05 ± 0.4 Rev. 1.0, 20-Sep-11 Document Number: 82387 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2.9 6.544-5406.01-4 technical drawings according to DIN specifications 5.08 0.4 ± 0.1 Z 2.1 ± 0.5 0.5 ± 0.2 5.08 ± 0.4 Leads coplanarity 0.1 max. Z 10:1 Anode Collector Cathode Emitter Recommended footprint 15.9 9 CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST www.vishay.com PACKAGE DIMENSIONS in millimeters FOR CNY65AxxxST 19.4 ± 0.3 17.8 ± 0.2 6.1 ± 0.2 9.6 ± 0.2 Vishay Semiconductors 7.15 ± 0.4 6.544-5404.01-4 7.62 PACKAGE MARKING (example) CNY65AY V YWW 69 Note • The “T” at the end of the product designation is not marked on the package Rev. 1.0, 20-Sep-11 Document Number: 82387 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2.9 0.4 ± 0.1 Z 2.1 ± 0.5 0.5 ± 0.2 Leads coplanarity 0.1 max. 7.62 ± 0.4 Z 10:1 Anode Collector Cathode Emitter Recommended footprint 20.9 14 technical drawings according to DIN specifications CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST www.vishay.com TAPE DIMENSIONS in millimeters FOR CNY64AxxxST Ø 1.55 ± 0.05 7.6 1.75 ± 0.1 Top cover tape 2 ± 0.15 4 ± 0.1 8 0.4 ± 0.05 Vishay Semiconductors 14.2 ± 0.10 13.2 25.5 32 ± 0.3 16 ± 0.1 Ø 2 min. 5.65 Direction of feed Leader (start) min. 400 mm without devices Trailer (end) min. 200 mm without devices Drawing-No.: 9.700-5375.01-4 Issue: 1; 23.05.11 technical drawings according to DIN specifications TAPE DIMENSIONS in millimeters FOR CNY65AxxxST Ø 1.55 ± 0.05 9.9 1.75 ± 0.1 Top cover tape 2 ± 0.15 4 ± 0.1 8 0.4 ± 0.05 14.2 ± 0.10 18.1 25.5 32 ± 0.3 16 ± 0.1 Ø 2 min. 5.65 Direction of feed Leader (start) min. 400 mm without devices Trailer (end) min. 200 mm without devices Drawing-No.: 9.700-5376.01-4 Issue: 1; 23.05.11 technical drawings according to DIN specifications Rev. 1.0, 20-Sep-11 Document Number: 82387 9 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CNY64AYST, CNY64ABST, CNY64AGRST, CNY65AYST, CNY65ABST, CNY65AGRST www.vishay.com REEL DIMENSIONS in millimeters Reel size "Y" T: Ø 330 ± 2 Vishay Semiconductors Unreel direction Ø 60 min. Tape position coming out from reel 2± 0.5 ØY Ø 21 ± 0.8 Ø 13 ± 0.2 32.4 + 2/0 38.4 max. Parts mounted Label posted here Empty leader 400 mm min. 100 mm min. with cover tape Leader and trailer tape: Direction of pulling out Empty trailer 200 mm min. Not indicated tolerances ± 0.1 Drawing-No.: 9.800-5120.01-4 Issue: 1; 23.05.11 technical drawings according to DIN specifications Rev. 1.0, 20-Sep-11 Document Number: 82387 10 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1