CODE601D158F050GL1

601D Vishay Sprague Aluminum Capacitors + 105 °C, Tubular, Axial Lead FEATURES • Temperature range - 55 °C to + 105 °C • Long life • Low ESR Fig.1 Component outlines • Available on special order - Call Vishay representative for part numbers and specifications QUICK REFERENCE DATA DESCRIPTION Nominal case size Ø D x L in mm Operating temperature Rated Capacitance range, CR Tolerance on CR Rated voltage range, UR Termination VALUE 0.625" x 1.125" [15.875 x 28.575] to 1.0" x 3.625" [25.4 x 92.075] - 55 °C to + 105 °C 12 µF to 33 000 µF - 10 %, + 50 % 6.3 WVDC to 300 WVDC Axial leads 2000 hours: Δ CAP ≤ 15 % from initial measurement. Δ ESR ≤ 1.25 x initial specified limit. Δ DCL ≤ initial specified limit. 500 hours: Δ CAP ≤ 10 % from initial measurement. Δ ESR ≤ 1.15 x initial specified limit. Δ DCL ≤ 2.0 x initial specified limit. I = K CV K = 0.5 at + 25 °C; = 3.0 at + 105 °C I in µA, C in µF, V in Volts RIPPLE CURRENT MULTIPLIERS TEMPERATURE Ambient Temperature + 105 °C + 65 °C + 45 °C + 25 °C FREQUENCY (Hz) WVDC 0 - 60 61 - 250 50 - 60 0.85 0.83 300 - 400 1.10 1.15 1000 AND UP 1.15 1.20 Multipliers 0.4 1.4 1.7 2.0 Life validation test at 105 °C LOW TEMPERATURE PERFORMANCE CAPACITANCE RATIO C - 55 °C/C + 25 °C MINIMUM at 120 Hz Rated Voltage WVDC 0 - 25 26 - 100 101 - 250 Rated Voltage WVDC 0-9 10 - 40 41 - 250 Capacitance Remaining 75 80 85 Multiplier 10 12 18 Shelf life at 105 °C ESR RATIO ESR - 55 °C/ESR + 25 °C MAXIMUM at 120 Hz DC leakage current DIMENSIONS in inches [millimeters] CASE CODE FE FJ FL FP FS FT GE GJ STYLE 1 AND 2 INSULATING SLEEVE D L 1.141 ± 0.062 0.635 ± 0.020 [16.1 ± 0.51] [29.0 ± 1.57] 0.635 ± 0.020 1.641 ± 0.062 [16.1 ± 0.51] [41.7 ± 1.57] 0.635 ± 0.020 2.141 ± 0.062 [16.1 ± 0.51] [54.4 ± 1.57] 0.635 ± 0.020 2.641 ± 0.062 [16.1 ± 0.51] [67.1 ± 1.57] 0.635 ± 0.020 3.141 ± 0.062 [16.1 ± 0.51] [79.8 ± 1.57] 0.635 ± 0.020 3.641 ± 0.062 [16.1 ± 0.51] [92.5 ± 1.57] 0.760 ± 0.020 1.141 ± 0.062 [19.3 ± 0.51] [29.0 ± 1.57] 0.760 ± 0.020 1.641 ± 0.062 [19.3 ± 0.51] [41.7 ± 1.57] STYLE 5 AND 7 INSULATING SLEEVE, COATED END SEAL D 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] L 1.187 ± 0.062 [30.2 ± 1.57] 1.687 ± 0.062 [42.9 ± 1.57] 2.187 ± 0.062 [55.6 ± 1.57] 2.687 ± 0.062 [68.3 ± 1.57] 3.187 ± 0.062 [81.0 ± 1.57] 3.687 ± 0.062 [93.7 ± 1.57] 1.187 ± 0.062 [30.2 ± 1.57] 1.687 ± 0.062 [42.9 ± 1.57] TYPICAL WEIGHT 0.32 oz. (9.0 g) 0.39 oz. (11.0 g) 0.53 oz. (15.0 g) 0.63 oz. (18.0 g) 0.88 oz. (25.0 g) 0.98 oz. (28.0 g) 0.46 oz. (13.0 g) 0.67 oz. (19.0 g) www.vishay.com 481 Document Number: 42039 Revision: 10-Jul-08 For technical questions, contact: aluminumcaps4@vishay.com 601D Vishay Sprague Aluminum Capacitors + 105 °C, Tubular, Axial Lead DIMENSIONS in inches [millimeters] CASE CODE GL GP GS GT HE HJ HL HP HS HT JE JJ JL JP JS JT STYLE 1 AND 2 INSULATING SLEEVE D L 0.760 ± 0.020 2.141 ± 0.062 [19.3 ± 0.51] [54.4 ± 1.57] 0.760 ± 0.020 2.641 ± 0.062 [19.3 ± 0.51] [67.1 ± 1.57] 0.760 ± 0.020 3.141 ± 0.062 [19.3 ± 0.51] [79.8 ± 1.57] 0.760 ± 0.020 3.641 ± 0.062 [19.3 ± 0.51] [92.5 ± 1.57] 0.885 ± 0.020 1.141 ± 0.062 [22.5 ± 0.51] [29.0 ± 1.57] 0.885 ± 0.020 1.641 ± 0.062 [22.5 ± 0.51] [41.7 ± 1.57] 0.885 ± 0.020 2.141 ± 0.062 [22.5 ± 0.51] [54.4 ± 1.57] 0.885 ± 0.020 2.641 ± 0.062 [22.5 ± 0.51] [67.1 ± 1.57] 0.885 ± 0.020 3.141 ± 0.062 [22.5 ± 0.51] [79.8 ± 1.57] 3.641 ± 0.062 0.885 ± 0.020 [22.5 ± 0.51] [92.5 ± 1.57] 1.010 ± 0.020 1.141 ± 0.062 [25.7 ± 0.51] [29.0 ± 1.57] 1.010 ± 0.020 1.641 ± 0.062 [25.7 ± 0.51] [41.7 ± 1.57] 1.010 ± 0.020 2.141 ± 0.062 [25.7 ± 0.51] [54.4 ± 1.57] 1.010 ± 0.020 2.641 ± 0.062 [25.7 ± 0.51] [67.1 ± 1.57] 1.010 ± 0.020 3.141 ± 0.062 [25.7 ± 0.51] [79.8 ± 1.57] 1.010 ± 0.020 3.641 ± 0.062 [25.7 ± 0.51] [92.5 ± 1.57] STYLE 5 AND 7 INSULATING SLEEVE, COATED END SEAL D 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] L 2.187 ± 0.062 [55.6 ± 1.57] 2.687 ± 0.062 [68.3 ± 1.57] 3.187 ± 0.062 [81.0 ± 1.57] 3.687 ± 0.062 [93.7 ± 1.57] 1.187 ± 0.062 [30.2 ± 1.57] 1.687 ± 0.062 [42.9 ± 1.57] 2.187 ± 0.062 [55.6 ± 1.57] 2.687 ± 0.062 [68.3 ± 1.57] 3.187 ± 0.062 [81.0 ± 1.57] 3.687 ± 0.062 [93.7 ± 1.57] 1.187 ± 0.062 [30.2 ± 1.57] 1.687 ± 0.062 [42.9 ± 1.57] 2.187 ± 0.062 [55.5 ± 1.57] 2.687 ± 0.062 [68.3 ± 1.57] 3.187 ± 0.062 [81.0 ± 1.57] 3.687 ± 0.062 [93.7 ± 1.57] TYPICAL WEIGHT 0.74 oz. (21.0 g) 0.88 oz. (25.0 g) 1.16 oz. (33.0 g) 1.33 oz. (38.0 g) 0.63 oz. (18.0 g) 0.95 oz. (27.0 g) 1.02 oz. (29.0 g) 1.37 oz. (39.0 g) 1.72 oz. (49.0 g) 2.07 oz. (59.0 g) 0.81 oz. (23.0 g) 1.02 oz. (29.0 g) 1.54 oz. (44.0 g) 1.86 oz. (53.0 g) 2.21 oz. (63.0 g) 2.52 oz. (72.0 g) DIMENSIONS AND AVAILABLE FORMS L C L D 31.75 min. PVC Sleeve 31.75 min. ORDERING EXAMPLE Electrolytic capacitor 601D series: 601D 158 F 050 GL 1 DESCRIPTION CODE 601D 158 F 050 GL 1 product type capacitance value (1500 µF) tolerance (F = - 10 %/+ 50 %) voltage rating at 105 °C (050 = 50 V) can size (see Dimensions table) sleeve and sealing (1 = P.V.C. sleeve) EXPLANATION www.vishay.com 482 For technical questions, contact: aluminumcaps4@vishay.com Document Number: 42039 Revision: 10-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1