CRA06P080310R0ZRT1

CRA06P Vishay Dale Thick Film Resistor Array FEATURES • • • • • CRA06P Thick Film resistor array is constructed on a high grade ceramic body with concave terminations. A small package enables the design of high density circuits. The single component reduces board space, component counts and assembly costs. Concave terminal array with square corners 8 terminal package with isolated resistors Wide ohmic range: 10R to 1M0 Lead (Pb)-free solder contacts on Ni barrier layer Pure tin plating provides compatibility with Lead (Pb)-free and lead containing soldering processes • Compatible with "Restriction of the use of Hazardous Substances" (RoHS) directive 2002/95/EC (issue 2004) • Operating temperature range of -55°C to +150°C STANDARD ELECTRICAL SPECIFICATIONS MODEL POWER RATING P70°C W CRA06P 0.0625 03 CIRCUIT LIMITING ELEMENT TEMPERATURE TOLERANCE VOLTAGE MAX. V 50 COEFFICIENT ppm/K 200 100 Jumper: Zero-Ohm-Resistor available; R ≤ 50m Ω % ± 2; ± 5 ±1 RESISTANCE RANGE E-SERIES Ω 10R - 1M0 10R - 1M0 24 24 - 96 TECHNICAL SPECIFICATIONS CRA06P PARAMETER Rated Dissipation at 70°C Limiting Element Voltage 1) Insulation Voltage (1min) Category Temperature Range Insulation Resistance 1) Rated voltage: P*R UNIT W V Vdc/ac peak °C Ω 03 CIRCUIT 0.0625 50 100 - 55 to + 150 > 10 10 PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: CRA06P08310K0JTA C MODEL CRA06 R A 0 6 PIN 08 P 0 8 3 1 VALUE 0 K 0 J T A PACKING TA = RT1 TC = RT6 SPECIAL up to 2 digits TERMINAL STYLE P CIRCUIT 3 = 03 TOLERANCE F = ± 1% G = ± 2% J = ± 5% Z = 0Ω Jumper J TOLERANCE F = ± 1% G = ± 2% J = ± 5% Z = 0Ω Jumper PRODUCT DESCRIPTION: CRA06P MODEL CRA06P 08 CRA06P 08 03 473 J RT1 e3 03 CIRCUIT TYPE 03 R = Decimal K = Thousand M = Million 0000 = 0Ω Jumper 473 RT1 PACKING1) RT1 RT6 e3 LEAD (Pb)-FREE e3 = Pure Tin Termination Finish TERMINAL COUNT 08 RESISTANCE VALUE 473 = 47KΩ 4702 = 47KΩ 10R0 = 10Ω 100 = 10Ω 000 = 0Ω Jumper First two digits (three for 1 %) are significant. Last digit is the multiplier 1) Please refer to table PACKING, page 10. NOTE: Products can be ordered using either the Product Description or the Part Number. www.vishay.com 8 For Technical Questions, contact: ff3aresistors@vishay.com Document Number 31047 Revision 25-Jul-05 CRA06P Thick Film, Resistor Array DIMENSIONS 4-Resistor Device PIN NO# DIMENSIONS [in millimeters] L 3.20 ± 0.20 A 0.30 ± 0.20 B 0.40 ± 0.15 C 0.40 ± 0.20 P 0.80 T 0.60 W 1.6 Vishay Dale A w C 8 Tol ± 0.10 ± 0.15 P L B T SOLDER PAD DIMENSIONS [in millimeters] c WAVE 0.8 w 2.6 p 0.8 a 0.4 b 0.9 c w b p a DESCRIPTION Production is strictly controlled and follows a set of instructions established for reproducibility. A thick film layer is deposited on a high grade ceramic substrate. The resistor elements are covered by a protective coating designed for electrical, mechanical and climatic protection. The wrap around terminations receive a final pure tin on nickel plating. ASSEMBLY The resistors are suitable for processing on automatic SMD assembly systems. They are suitable for automatic soldering using wave and solder paste reflow. Due to the design, arrays have automatic placement capability. The resistors are Lead (Pb)-free, the pure tin plating provides compatibility with Lead (Pb)-free and Lead-containing soldering processes. All products comply with the CEFIC-EECA-EICTA list of legal restrictions on hazardous substances. This includes full compatibility with the following directives: • 2000/53/EC End of Vehicle Life Directive (ELV) • 2000/53/EC Annex II to End of Vehicle Life Directive (ELV II) • 2002/95/EC Restriction of the use of Hazardous Substances Directive (RoHS) • 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) Solderability is specified for 2 years after production or requalification. The permitted storage time is 20 years. The result of the determined production is verified by an extensive testing procedure. Only accepted products are laid directly into the paper tape in accordance with EIA 481. Document Number 31047 Revision 25-Jul-05 For Technical Questions, contact: ff3aresistors@vishay.com www.vishay.com 9 CRA06P Vishay Dale CIRCUIT 03 Circuit Thick Film, Resistor Array 8-pin Rated Power % 120 100 80 60 40 20 0 -55 -25 0 25 50 Derating 75 100 125 150 70 Ambient Temperature °C PACKING PACKING CODE MODEL TAPE WIDTH 8 mm CRA06P 8 mm 330 mm/13" 20 000 4 mm RT6 DIAMETER 180 mm/7" PIECES 5 000 PITCH 4 mm PAPER TAPE RT1 www.vishay.com 10 For Technical Questions, contact: ff3aresistors@vishay.com Document Number 31047 Revision 25-Jul-05 CRA06P Thick Film, Resistor Array Vishay Dale PERFORMANCE TEST Endurance Test at 70°C per EIA 575-3.14 Overload per EIA 575-3.6 Thermal Shock Moisture Resistance Resistance to Soldering Heat EIA 575 3.8 High Temperature Exposure Low Temperature Operation Solderability & Leaching CONDITIONS OF TEST 1000 hours at 70°C, 1.5 hours "ON", 0.5 hours "OFF" TEST RESULTS ± 1.0 % ± 0.5 % ± 0.5 % ± 1.0 % ± 1.0 % ± 1.0 % ± 0.5 % 95 % Coverage Short time overload per EIA 575-3.5 per EIA 575-3.10 10 seconds at 260°C solder bath temperature per EIA 575-3.7 per EIA-/ IS-30A-3.6 EIA 575-3.12 Document Number 31047 Revision 25-Jul-05 For Technical Questions, contact: ff3aresistors@vishay.com www.vishay.com 11