CRCC1206100F182KTF

CRCC Vishay Dale Thick Film, Rectangular, Resistor/Capacitor Chip FEATURES • Single component reduces board space and component counts • • • • • • Choice of Dielectric Characteristics X7R or Y5U Wrap around termination Thick film Resistor/Capacitor element Inner electrode protection Flow & Reflow solderable Automatic placement capability, standard size STANDARD ELECTRICAL SPECIFICATIONS SIZE RESISTOR GLOBAL POWER RATING TEMPERATURE TOL MODEL INCH METRIC COEFFICIENT P70 °C % W ppm/°C CRCC1206 CRCC1206 1206 1206 3216 3216 0.125 0.125 200 200 5 5 CAPACITOR VALUE RANGE Ω 10R - 1M0 10R - 1M0 TEMPERATURE TOL. VOLTAGE RATING DIELECTRIC COEFFICIENT % VDC % X7R Y5U ± 15 + 22, - 56 20 20 50 50 VALUE RANGE pF 10 - 270 270 - 1800 RESISTOR • Operating Temperature Range: - 55 °C to + 125 °C • Technology: thick film CAPACITOR • Operating Temperature Range: X7R - 55 °C to + 125 °C Y5U - 30 °C to + 85 °C • Maximum Dissipation Factor: 2.5 % Notes • Packaging: see appropriate catalog or web page • Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material TECHNICAL SPECIFICATIONS PARAMETER Rated Dissipation at 70 °C Capacitor Voltage Rating Dielectric Withstanding Voltage (5 seconds, 50mA Charge) Category Temperature Range Insulation Resistance Weight/1000 pieces UNIT W V Vdc °C Ω g RESISTOR 0.125 – – - 55/+ 155 > 1010 0.65 X7R CAPACITOR – 50 125 - 55/+ 125 > 1010 2 Y5U CAPACITOR – 50 125 - 30/+ 85 > 1010 5.5 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CRCC1206472J220MTF (preferred part numbering format) C GLOBAL MODEL CRCC1206 R C C 1 2 0 6 4 7 2 J 2 2 0 M T F RESISTANCE VALUE 2 digit significant figure, followed by a multiplier 100 = 10 Ω 683 = 68 kΩ 105 = 1.0 MΩ RES. TOLERANCE F=±1% G=±2% J=±5% CAPACITANCE VALUE (pF) 2 digit significant figure, followed by a multiplier 100 = 10 pF 271 = 270 pF 182 = 1800 pF CAP. TOLERANCE K = ± 10 % M = ± 20 % PACKAGING EA = Lead (Pb)-free, T/R (4000 pcs) TF = Tin/Lead, T/R (4000 pcs) Historical Part Number example: CRCC1206472J220MR02 (will continue to be accepted) CRCC1206 MODEL 472 RESISTANCE VALUE J RES. TOLERANCE 220 CAPACITANCE VALUE M CAP. TOLERANCE R02 PACKAGING www.vishay.com 186 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31045 Revision: 12-Jan-07 CRCC Thick Film, Rectangular, Resistor/Capacitor Chip Vishay Dale DIMENSIONS SIZE INCH METRIC 1206 3216 L DIMENSIONS [in millimeters] W H T1 T2 3.2 ± 0.15 1.6 ± 0.15 0.55 ± 0.15 0.5 ± 0.25 0.5 ± 0.25 SIZE INCH 1206 METRIC 3216 SOLDER PAD DIMENSIONS [in millimeters] REFLOW SOLDERING WAVE SOLDERING a 0.9 b 1.7 l 2.0 a 1.1 b 1.7 l 2.2 Rated Power in % 120 100 SCHEMATIC 80 60 40 20 0 - 55 - 25 0 25 50 Derating PERFORMANCE TEST Endurance Test at 70 °C MIL-Std-202 Method 108 Dielectric Withstanding Voltage MIL-Std-202 Method 301 Thermal Shock MIL-Std-202 Method 107 Moisture MIL-Std-202 Method 106 Resistance to Soldering Heat EIA 575 High Temperature Exposure EIA 575 Low Temperature Operation EIA 575 Solderability & Leaching EIA 575 3.12 75 100 125 150 175 70 Ambient Temperature in °C CONDITIONS OF TEST 1000 hours at 70 °C, 1.5 hours "ON", 0.5 hours "OFF" 125 Vdc, 5 seconds, 50 mA charge 100 cycles, - 55 to + 125 °C Omit steps 7A and B 10 seconds at 260 °C solder bath temperature 125 °C for 100 hours 1 hour at - 55 °C then 45 minutes at 50 V Condition C TEST RESULTS R ± (5 % + 2 Ω) C ± 20 % no physical damage ± (5 % + 2 Ω) ± (5 % + 2 Ω) ± (5 % + 2 Ω) ± (5 % + 2 Ω) ± (5 % + 2 Ω) ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % 95 % Coverage APPLICABLE SPECIFICATIONS • IPC Standards • EIA 575 Document Number: 31045 Revision: 12-Jan-07 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 187 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1