CS20108D3S104M5P

CS201 Vishay Dale Capacitor Networks, Single-In-Line, Conformal Coated SIP, "D" Profile FEATURES • X7R and COG capacitors available • Multiple isolated capacitors • Multiple capacitors, common ground • Custom design capability • “D” 0.300" [7.62 mm] package height (maximum) Available e1 STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL CS201 CS201 PROFILE SCHEMATIC CAPACITANCE RANGE COG (1) D D 1 3 33 pF - 3900 pF 33 pF - 3900 pF X7R 470 pF - 0.1 µF 470 pF - 0.1 µF 470 pF - 0.1 µF CAPACITANCE TOLERANCE (- 55 °C to + 125 °C) % ± 10 (K), ± 20 (M) ± 10 (K), ± 20 (M) ± 10 (K), ± 20 (M) CAPACITOR VOLTAGE at 85 °C VDC 50 (5) 50 (5) 50 (5) CS201 D 4 33 pF - 3900 pF Note (1) COG capacitors may be substituted for X7R capacitors TECHNICAL SPECIFICATIONS PARAMETER UNIT ppm/°C or % CS201 COG ± 30 ppm/°C X7R MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Solderability ± 15 % Body Terminals Permanency testing per MIL-STD202, Method 215 Per MIL-STD-202, Method 208E High alumina, epoxy coated (Flammability UL94 V-0) Phosphorus-bronze, solder plated Pin #1 identifier, DALE or D, Part number (abbreviated as space allows), Date code Temperature Coefficient (- 55 °C to +125 °C) Dissipation Factor (Maximum) ±% 0.15 2.5 Marking GLOBAL PART NUMBER INFORMATION New Global Part Numbering: 20108D1C103K5P (preferred part numbering format) 2 GLOBAL MODEL 201 = CS201 0 1 0 PACKAGE HEIGHT D = “D” Profile 8 D 1 C 1 0 3 K 5 P _ _ _ P PIN COUNT 04 = 4 Pin 08 = 8 Pin 18 = 18 Pin SCHEMATIC CHARACTERISTIC 1 3 4 0 = Special C = COG X = X7R S = Special CAPACITANCE VALUE (in picofarads) 2 digit significant figure, followed by a multiplier 330 = 33 pF 392 = 3900 pF 104 = 0.1 µF TOLERANCE K = ± 10 % M = ± 20 % S = Special VOLTAGE 5 = 50V S = Special PACKAGING E = Lead (Pb)-free, Bulk P = Tin/Lead, Bulk SPECIAL Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable Historical Part Number example: CS20108D1C103K5 (will continue to be accepted) CS201 HISTORICAL MODEL 08 PIN COUNT D PACKAGE HEIGHT 1 SCHEMATIC C CHARACTERISTIC 103 CAPACITANCE VALUE K TOLERANCE 5 VOLTAGE P03 PACKAGING www.vishay.com 1 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31522 Revision: 07-Aug-08 CS201 Capacitor Networks, Single-In-Line, Conformal Coated SIP, "D" Profile DIMENSIONS in inches [millimeters] 0.085 [2.160] Typ. L Max. 0.050 [1.27] Typ. Vishay Dale 0.135 [3.43] Max. 0.300 [7.62] Seating Plane for 0.040 [1.016] Ø Hole 0.007 [0.178] Ref. 0.020 [0.508] 0.100 ± 0.005 [2.54 ± 0.127] Non-Cumulative at Point of Egress 0.050 [1.27] 0.010 [0.254] 0.135 + 0.015 - 0.010 [3.43 + 0.381 - 0.254] Pin #1 is extreme left-hand terminal on side with marking. NUMBER OF PINS 4 pin 5 pin 6 pin 7 pin 8 pin L MAXIMUM 0.400 [10.16] 0.500 [12.70] 0.600 [15.24] 0.700 [17.78] 0.800 [20.32] NUMBER OF PINS 9 pin 10 pin 11 pin 12 pin 13 pin L MAXIMUM 0.900 [22.86] 1.000 [25.40] 1.100 [27.94] 1.200 [30.48] 1.300 [33.02] NUMBER OF PINS 14 pin 15 pin 16 pin 17 pin 18 pin L MAXIMUM 1.400 [35.56] 1.500 [38.10] 1.600 [40.64] 1.700 [43.18] 1.800 [45.72] SCHEMATICS Schematic 1 Schematic 3 Schematic 4 1 2 3 4 5 6 n-1 n 1 2 3 4 5 6 7 8 n-1 n 1 2 3 4 n-1 n Common Bus - 1 Ground Lead Isolated Capacitor Sections Common Bus - 2 Ground Leads Document Number: 31522 Revision: 07-Aug-08 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 2 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1