CSC11

CSC Vishay Dale Thick Film Resistor Networks Single-In-Line, Coated SIP 01, 03, 05 Schematics FEATURES • • • • • • • • 0.195" [4.95mm] "A", 0.250" [6.35mm] "B" "A" profile standard in 4 thru 12 pins Highly stable thick film Low temperature coefficient (- 55°C to + 125°C) ± 100ppm/°C Reduces total assembly costs Resistor elements protected by tough epoxy conformal coating Wide resistance range Available in bag pack or tube pack STANDARD ELECTRICAL SPECIFICATIONS MODEL/ SCHEMATIC CSC01 CSC03 CSC05 PROFILE RESISTOR RESISTANCE POWER RATING RANGE Max. @ 70°C* Ω 0.20 W 0.25 W 0.30 W 0.40 W 0.20 W 0.25 W STANDARD TEMPERATURE TCR TOLERANCE COEFFICIENT TRACKING % (- 55°C to + 125°C) (- 55°C to + 125°C) ± 2 (1%*) ± 2 (1%*) ± 2 (1%*) OPERATING VOLTAGE VDC Max. 100 100 100 A B A B A B 10 - 2.2M 10 - 2.2M 10 - 2.2M ± 100ppm/°C ± 100ppm/°C ± 100ppm/°C ± 50ppm/°C ± 50ppm/°C ± 150ppm/°C * For resistor power ratings @ + 25°C see derating curves. • See derating curves for Package Power Rating. Higher power rated “C” Profile available. * Contact factory for 1% TECHNICAL SPECIFICATIONS PARAMETER Voltage Coefficient of Resistance Dielectric Strength Isolation Resistance (03 Schematic) Operating Temperature Range UNIT Veff VAC Ω °C CSC Series < 50ppm typical 200 > 100M - 55 to + 125 ORDERING INFORMATION 01 and 03 Schematics CSC MODEL 08 NUMBER OF PINS A PACKAGE CODE A = 0.195" [4.95mm] Height 0.100" [2.54mm] Lead Spacing B = 0.250" [6.35mm] Height 0.100" [2.54mm] Lead Spacing 01 03 SCHEMATIC 01 = Pin #1 common to all resistors 03 = Isolated resistors 101 RESISTANCE VALUE First 2 digits are significant figures. Last digit specifies number of zeros to follow. G TOLERANCE G= ± 2% 05 Schematic CSC MODEL 08 NUMBER OF PINS A PACKAGE CODE A = 0.195" [4.95mm] Height 0.100" [2.54mm] Lead Spacing B = 0.250" [6.35mm] Height 0.100" [2.54mm] Lead Spacing 331 05 221 SCHEMATIC RESISTANCE RESISTANCE VALUE R2 VALUE R1 First two digits are significant figures. The third digit specifies the number of zeros to follow. G TOLERANCE G= ± 2% www.vishay.com 32 For Technical Questions, contact: ff2aresistors@vishay.com Document Number: 31509 Revision 02-Aug-02 CSC Thick Film Resistor Networks, Single-In-Line, Coated SIP DIMENSIONS in inches [millimeters] A Max. C Max. 0.130 ± 0.010 [3.30 ± 0.254] 0.050 [1.27] Max. 0.100 ± 0.010 [2.54 ± 0.254] Non-Accumulative 0.018 ± 0.003 [0.457 ± 0.076] B Pin #1 Vishay Dale 0.098 [2.49] Max. 0.045 [1.14] 0.032 [0.813] 0.012 ± 0.003 [0.305 ± 0.076] (Leads are Along Centerline of Body) 01 Schematic MODEL CSC04 CSC05 CSC06 CSC07 CSC08 NUMBER OF RESISTORS 3 4 5 6 7 8 9 10 11 NUMBER OF RESISTORS 2 3 4 5 6 NUMBER OF RESISTORS 4 6 8 10 12 14 16 18 20 A (Maximum) 0.390 [9.90] 0.490 [12.45] 0.590 [14.99] 0.690 [17.53] 0.790 [20.07] 0.890 [22.61] 0.990 [25.15] 1.09 [27.69] 1.19 [30.23] B 0.300 [7.62] 0.400 [10.16] 0.500 [12.70] 0.600 [15.24] 0.700 [17.78] 0.800 [20.32] 0.900 [22.86] 1.00 [25.40] 1.100 [27.94] C (Maximum) "A" Profile = 0.195 [4.95] "B" Profile = 0.250 [6.35] 1 2 3 n-1 n CSC09 CSC10 CSC11* CSC12* 03 Schematic MODEL CSC04 CSC06 CSC08 1 2 3 4 n-1 n A (Maximum) 0.390 [9.90] 0.590 [14.99] 0.790 [20.07] 0.990 [25.15] 1.19 [30.23] A (Maximum) 0.390 [9.90] 0.490 [12.45] 0.590 [14.99] 0.690 [17.53] 0.790 [20.07] 0.890 [22.61] 0.990 [25.15] 1.09 [27.69] 1.19 [30.23] B 0.300 [7.62] 0.500 [12.70] 0.700 [17.78] 0.900 [22.86] 1.100 [27.94] B 0.300 [7.62] 0.400 [10.16] 0.500 [12.70] 0.600 [15.24] 0.700 [17.78] 0.800 [20.32] 0.900 [22.86] 1.00 [25.40] 1.100 [27.94] C (Maximum) "A" Profile = 0.195 [4.95] "B" Profile = 0.250 [6.35] CSC10 CSC12* 05 Schematic R2 R1 MODEL CSC04 CSC05 CSC06 CSC07 CSC08 CSC09 C (Maximum) "A" Profile = 0.195 [4.95] "B" Profile = 0.250 [6.35] 1 2 3 n-1 n CSC10 CSC11* CSC12* * "B" Profile only. MECHANICAL SPECIFICATIONS Marking Resistance to Solvents: Solderability: Body: Terminals: Permanency testing per MIL-STD202, Method 215. Per MIL-STD-202, Method 208E, RMA flux. High alumina, epoxy coated. Copper alloy, solder plated. STOCKED RESISTANCE VALUES IN OHMS (“G” TOLERANCE) Standard E-24 resistance values stocked. Consult factory. Many dual terminator resistance values stocked. Consult factory www.vishay.com 33 Document Number: 31509 Revision 02-Aug-02 For Technical Questions, contact: ff2aresistors@vishay.com CSC Vishay Dale "A" Profile Thick Film Resistor Networks, Single-In-Line, Coated SIP Power Rating (Watts) "A" PROFILE + 70°C PACKAGE RATINGS CSC12A 1.90 1.50 1.15 CSC10A Package 1.5 watts 1.37 watts 1.25 watts 1.12 watts 1.00 watts 0.87 watts 0.75 watts 0.62 watts 0.40 watts CSC11A CSC08A Package CSC06A Package CSC10A CSC09A Single Resistor 0.45 0.30 03 Schematic 01 and 05 Schematics CSC08A CSC07A - 50 + 25 + 70 + 125 + 150 CSC06A CSC05A CSC04A Derating Ambient Temperature °C "B" Profile Power Rating (Watts) "B" PROFILE + 70°C PACKAGE RATINGS CSC12B 2.50 2.00 1.50 CSC10B Package CSC08B Package CSC06B Package 1.90 watts 1.75 watts 1.60 watts 1.45 watts 1.30 watts 1.15 watts 1.00 watts 0.80 watts 0.60 watts CSC11B CSC10B CSC09B CSC08B CSC07B CSC06B + 70 + 125 + 150 Single Resistor 0.60 0.38 03 Schematic 01 and 05 Schematics - 50 + 25 CSC05B CSC04B Derating Ambient Temperature °C www.vishay.com 34 For Technical Questions, contact: ff2aresistors@vishay.com Document Number: 31509 Revision 02-Aug-02 CSC Thick Film Resistor Networks, Single-In-Line, Coated SIP CIRCUIT APPLICATIONS 01 Schematic "A" Profile = 3, 5, 7, 9 and 11 resistors with one pin common The CSCxxx-01 single-in-line resistor networks provide the user with nominally equal resistors, each connected to a common pin (Pin No. 1). Commonly used in the following applications: • "Wired OR" Pull-up • Open Collector Pull-up • Power Gate Pull-up • TTL Input Pull-down • MOS/ROM Pull-up/Pull-down • TTL Unused Gate Pull-up * "B" Profile available. Odd pin available in 5, 7, 9, and 11. Vishay Dale 1 2 3 n-1 n 03 Schematic "A" Profile = 2 through 6 isolated resistors The CSCxxx-03 single-in-line resistor networks provide the user with nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: • "Wired OR" Pull-up • Long-Line Impedance Balancing • Power Driven Pull-up • LED Current Limiting • Power Gate Pull-up • ECL Output Pull-down 1 2 3 4 n-1 n • Line Termination * "B" Profile available. • TTL Input Pull-down 05 Schematic R2 R1 Pulse squaring and TTL dual-line terminators The CSCxxx-05 circuits contain series pairs of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dualline termination and pulse squaring. n-1 n 1 2 3 * "B" Profile available. Odd pin available in 5, 7, 9 and 11. PERFORMANCE TEST Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock Vibration Load Life CONDITIONS 5 cycles between - 65°C and + 125°C 2.5 x rated working voltage, 5 seconds 45 minutes at full rated working voltage at - 65°C 240 hours with humidity ranging from 80% RH to 98% RH Leads immersed in + 350°C solder to within 1/16" of body for 3 seconds Total of 18 shocks at 100 G's 12 hours at maximum of 20 G's between 10 and 2,000 Hz 1,000 hours at + 70°C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF” for full 1000 hour period. Derated according to the curve. 4.5 pound pull for 30 seconds 10,000 Megohm (minimum) No evidence of arcing or damage (200 V RMS for 1 minute) MAX. ∆R (Typical Test Lots) ± 0.50% ∆R ± 0.25% ∆R ± 0.25% ∆R ± 1.00% ∆R ± 0.25% ∆R ± 0.25% ∆R ± 0.25% ∆R ± 1.00% ∆R ± 0.25% ∆R — — Terminal Strength Insulation Resistance Dielectric Withstanding Voltage Document Number: 31509 Revision 02-Aug-02 For Technical Questions, contact: ff2aresistors@vishay.com www.vishay.com 35