CWR16
www.vishay.com
Vishay Sprague
Solid Tantalum Surface Mount Capacitors TANTAMOUNT® Conformal Coated, Extended Range, Military, MIL-PRF-55365/13 Qualified
FEATURES
• Weibull failure rates B, C, T • Tape and reel available per EIA 481 • Termination finishes available; gold plate, solder plated, and hot solder dipped • Mounting: Surface mount • Compliant to RoHS Directive 2002/95/EC
Note * Pb containing terminations are not RoHS compliant, exemptions may apply
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C (above 85 °C, voltage derating is required) Capacitance Range: 0.33 μF to 330 μF Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 % Voltage Rating: 4 VDC to 35 VDC
ORDERING INFORMATION
CWR16 TYPE D VOLTAGE B TERMINATION FINISH B = Gold H = Solder plated C = Hot solder dipped 335 CAPACITANCE K CAPACITANCE TOLERANCE J=±5% K = ± 10 % M = ± 20 % B FAILURE RATE %/1000 h B = 0.1 C = 0.01 T = 0.01 (1) A CASE CODE A B C D E F G H A SURGE CURRENT /TR PACKAGING
C=4V D=6V F = 10 V H = 15 V J = 20 V K = 25 V M = 35 V
This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow.
A = 10 cycles at + 25 °C B = 10 cycles at - 55 °C and + 85 °C C = 10 cycles at - 55 °C and + 85 °C (before Weibull grading) Z = No surge current
Blank = Bulk, plastic tray /FA = Waffle pack /PR = 100 pcs reel /HR = Half reel /TR = Full reel
Note (1) T level capacitors are recommended for “space applications”
DIMENSIONS in inches [millimeters]
+ Weld and dimple projection identifies anode (+) terminal
W T1 L P P
H
T2 (max.)
CASE CODE A B C D E F G H
L 0.100 ± 0.015 [2.54 ± 0.38] 0.150 ± 0.015 [3.81 ± 0.38] 0.200 ± 0.015 [5.08 ± 0.38] 0.150 ± 0.015 [3.81 ± 0.38] 0.200 ± 0.015 [5.08 ± 0.38] 0.220 ± 0.015 [5.59 ± 0.38] 0.265 ± 0.015 [6.73 ± 0.38] 0.285 ± 0.015 [7.24 ± 0.38]
W 0.050 ± 0.015 [1.27 ± 0.38] 0.050 ± 0.015 [1.27 ± 0.38] 0.050 ± 0.015 [1.27 ± 0.38] 0.100 ± 0.015 [2.54 ± 0.38] 0.100 ± 0.015 [2.54 ± 0.38] 0.135 ± 0.015 [3.43 ± 0.38] 0.110 ± 0.015 [2.79 ± 0.38] 0.150 ± 0.015 [3.81 ± 0.38]
H 0.050 ± 0.015 [1.27 ± 0.38] 0.050 ± 0.015 [1.27 ± 0.38] 0.050 ± 0.015 [1.27 ± 0.38] 0.050 ± 0.015 [1.27 ± 0.38] 0.050 ± 0.015 [1.27 ± 0.38] 0.070 ± 0.015 [1.78 ± 0.38] 0.110 ± 0.015 [2.79 ± 0.38] 0.110 ± 0.015 [2.79 ± 0.38]
P 0.030 ± 0.005 [0.76 ± 0.13] 0.030 ± 0.005 [0.76 ± 0.13] 0.030 ± 0.005 [0.76 ± 0.13] 0.030 ± 0.005 [0.76 ± 0.13] 0.030 ± 0.005 [0.76 ± 0.13] 0.030 ± 0.005 [0.76 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13] 0.050 ± 0.005 [1.27 ± 0.13]
T1 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13] 0.005 [0.13]
T2 (max.) 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38]
Note • When solder coated terminations are required, add 0.015" [0.38 mm] to termination dimension tolerance Revision: 31-Aug-11 Document Number: 40094 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR16
www.vishay.com
Vishay Sprague
RATINGS AND CASE CODES
μF 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 A A A B B B, D D, E E E F G H H A A B B B, D, E D, E E F F, G G G H H A A B, C B, C, D B, C, D, E D, E E F F, G G G, H H H A A A B B, C, D D, E D, E E, F F F, G G, H G, H H A A B B D E E E, F F G H H G G, H H F G H H D E B A 4V 6V 10 V 15 V 20 V 25 V 35 V A
STANDARD RATINGS
MAX. DCL (μA) AT CAPACITANCE CASE (μF) CODE PART NUMBER + 25 °C + 85 °C MAX. DF (%) AT - 55 °C + 85 °C + 125 °C + 25 °C + 125 °C MAX. ESR AT + 25 °C 100 kHz () 12 12 12 8 8 8 4 4 3 3 3 2 1 1 0.9
4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C 3.3 4.7 6.8 10 15 22 22 33 33 47 68 100 150 220 330 A A A B B B D D E E E F G H H CWR16C(1)335(2)(3)A(4)(5) CWR16C(1)475(2)(3)A(4)(5) CWR16C(1)685(2)(3)A(4)(5) CWR16C(1)106(2)(3)B(4)(5) CWR16C(1)156(2)(3)B(4)(5) CWR16C(1)226(2)(3)B(4)(5) CWR16C(1)226(2)(3)D(4)(5) CWR16C(1)336(2)(3)D(4)(5) CWR16C(1)336(2)(3)E(4)(5) CWR16C(1)476(2)(3)E(4)(5) CWR16C(1)686(2)(3)E(4)(5) CWR16C(1)107(2)(3)F(4)(5) CWR16C(1)157(2)(3)G(4)(5) CWR16C(1)227(2)(3)H(4)(5) CWR16C(1)337(2)(3)H(4)(5) 1 1 1 1 1 1 1 2 2 2 3 4 6 8 10 10 10 10 10 10 10 10 20 20 20 30 40 60 80 100 12 12 12 12 12 12 12 24 24 24 36 48 72 96 120 6 6 6 8 8 8 8 8 8 8 8 10 10 10 10 8 8 8 10 10 10 10 10 10 10 10 12 12 12 12 8 8 8 10 10 10 12 12 12 12 12 12 12 12 12
Note • Part number definitions: (1) Termination finish: B, C, H (2) Capacitance tolerance: J, K, M (3) Failure rate: B, C, T (4) Surge current: A, B, C, Z (5) Packaging: Blank, /FA, /HR, /PR, /TR Revision: 31-Aug-11 Document Number: 40094 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR16
www.vishay.com
Vishay Sprague
MAX. DCL (μA) AT MAX. DF (%) AT + 85 °C + 125 °C - 55 °C MAX. ESR AT + 25 °C 100 kHz () 12 12 8 8 8 5 3 5 3.5 3.5 3.5 1.5 1 1.1 1.1 0.9 0.9 12 12 8 5.5 8 5.5 5 8 5.5 4 3.5 5 3 2 1.5 1.5 1 1.1 1.1 0.9 0.9 0.9
STANDARD RATINGS
CAPACITANCE CASE (μF) CODE PART NUMBER
+ 25 °C
+ 85 °C
+ 125 °C + 25 °C
6 VDC AT + 85 °C; 4 VDC AT + 125 °C 3.3 4.7 6.8 10 15 15 15 22 22 33 47 68 68 100 150 220 330 2.2 3.3 4.7 4.7 6.8 6.8 6.8 10 10 10 10 15 15 22 33 47 47 68 100 100 150 220 A A B B B D E D E E F F G G G H H A A B C B C D B C D E D E E F F G G G H H H CWR16D(1)335(2)(3)A(4)(5) CWR16D(1)475(2)(3)A(4)(5) CWR16D(1)685(2)(3)B(4)(5) CWR16D(1)106(2)(3)B(4)(5) CWR16D(1)156(2)(3)B(4)(5) CWR16D(1)156(2)(3)D(4)(5) CWR16D(1)156(2)(3)E(4)(5) CWR16D(1)226(2)(3)D(4)(5) CWR16D(1)226(2)(3)E(4)(5) CWR16D(1)336(2)(3)E(4)(5) CWR16D(1)476(2)(3)F(4)(5) CWR16D(1)686(2)(3)F(4)(5) CWR16D(1)686(2)(3)G(4)(5) CWR16D(1)107(2)(3)G(4)(5) CWR16D(1)157(2)(3)G(4)(5) CWR16D(1)227(2)(3)H(4)(5) CWR16D(1)337(2)(3)H(4)(5) CWR16F(1)225(2)(3)A(4)(5) CWR16F(1)335(2)(3)A(4)(5) CWR16F(1)475(2)(3)B(4)(5) CWR16F(1)475(2)(3)C(4)(5) CWR16F(1)685(2)(3)B(4)(5) CWR16F(1)685(2)(3)C(4)(5) CWR16F(1)685(2)(3)D(4)(5) CWR16F(1)106(2)(3)B(4)(5) CWR16F(1)106(2)(3)C(4)(5) CWR16F(1)106(2)(3)D(4)(5) CWR16F(1)106(2)(3)E(4)(5) CWR16F(1)156(2)(3)D(4)(5) CWR16F(1)156(2)(3)E(4)(5) CWR16F(1)226(2)(3)E(4)(5) CWR16F(1)336(2)(3)F(4)(5) CWR16F(1)476(2)(3)F(4)(5) CWR16F(1)476(2)(3)G(4)(5) CWR16F(1)686(2)(3)G(4)(5) CWR16F(1)107(2)(3)G(4)(5) CWR16F(1)107(2)(3)H(4)(5) CWR16F(1)157(2)(3)H(4)(5) CWR16F(1)227(2)(3)H(4)(5) 1 1 1 1 1 1 1 1 2 2 3 4 4 6 10 10 20 1 1 1 1 1 1 1 1 1 1 1 1 2 3 3 4 4 6 10 10 15 20 10 10 10 10 10 10 10 10 20 20 30 40 40 60 100 100 200 10 10 10 10 10 10 10 10 10 10 10 10 20 30 30 40 40 60 100 100 150 200 12 12 12 12 12 12 12 12 24 24 36 48 48 72 120 120 240 12 12 12 12 12 12 12 12 12 12 12 12 24 36 36 48 48 72 120 120 180 240 6 6 6 6 8 8 8 6 8 6 8 10 10 10 10 10 10 6 6 6 6 6 6 6 8 6 6 6 6 8 8 8 10 10 10 10 10 10 10 8 8 8 8 10 10 10 8 10 8 10 12 12 12 12 12 12 8 8 8 8 8 8 8 10 8 8 8 8 10 10 10 12 12 12 12 12 12 12 8 8 8 8 10 12 12 8 12 8 12 12 12 12 12 12 12 8 8 8 8 8 8 8 10 8 8 8 8 10 10 10 12 12 12 12 12 12 12
10 VDC AT + 85 ºC; 7 VDC AT + 125 ºC
Note • Part number definitions: (1) Termination finish: B, C, H (2) Capacitance tolerance: J, K, M (3) Failure rate: B, C, T (4) Surge current: A, B, C, Z (5) Packaging: Blank, /FA, /HR, /PR, /TR Revision: 31-Aug-11 Document Number: 40094 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR16
www.vishay.com
Vishay Sprague
MAX. DCL (μA) AT MAX. DF (%) AT + 85 °C + 125 °C 8 8 8 8 8 8 8 8 10 8 8 8 10 10 8 10 10 10 10 10 12 8 8 8 8 8 8 8 8 8 8 10 10 10 8 8 8 8 8 8 8 8 10 8 8 10 8 - 55 °C MAX. ESR AT + 25 °C 100 kHz () 15 15 15 9 5 5.5 6 6 3 6 4 4 3 3 3 1.1 1.1 0.9 1.1 0.9 0.9 15 15 9 9 6 6 5 5 3 3 2.5 0.9 0.9 15 10 6 4 3 1.4 1.4 0.9 0.9 22 1.5 0.9 0.9
STANDARD RATINGS
CAPACITANCE CASE (μF) CODE PART NUMBER
+ 25 °C
+ 85 °C
+ 125 °C + 25 °C
1.0 1.5 2.2 3.3 4.7 4.7 4.7 6.8 6.8 10 10 15 15 22 33 33 47 47 68 68 100 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 10 15 22 33 47 0.47 1.0 2.2 3.3 6.8 15 22 22 33 0.33 6.8 10 15
A A A B B C D D E D E E F F F G G H G H H A A B B D E E E F F G H H A B D E F G G H H A G H H
15 VDC AT + 85 ºC; 10 VDC AT + 125 ºC CWR16H(1)105(2)(3)A(4)(5) 1 10 12 CWR16H(1)155(2)(3)A(4)(5) 1 10 12 CWR16H(1)225(2)(3)A(4)(5) 1 10 12 CWR16H(1)335(2)(3)B(4)(5) 1 10 12 CWR16H(1)475(2)(3)B(4)(5) 1 10 12 CWR16H(1)475(2)(3)C(4)(5) 1 10 12 CWR16H(1)475(2)(3)D(4)(5) 1 10 12 CWR16H(1)685(2)(3)D(4)(5) 1 10 12 CWR16H(1)685(2)(3)E(4)(5) 1 10 12 CWR16H(1)106(2)(3)D(4)(5) 2 20 24 CWR16H(1)106(2)(3)E(4)(5) 2 20 24 CWR16H(1)156(2)(3)E(4)(5) 2 20 24 CWR16H(1)156(2)(3)F(4)(5) 2 20 24 CWR16H(1)226(2)(3)F(4)(5) 3 30 36 CWR16H(1)336(2)(3)F(4)(5) 5 50 60 CWR16H(1)336(2)(3)G(4)(5) 6 60 72 CWR16H(1)476(2)(3)G(4)(5) 10 100 120 CWR16H(1)476(2)(3)H(4)(5) 10 100 120 CWR16H(1)686(2)(3)G(4)(5) 10 100 120 CWR16H(1)686(2)(3)H(4)(5) 10 100 120 CWR16H(1)107(2)(3)H(4)(5) 15 150 180 20 VDC AT + 85 ºC; 13 VDC AT + 125 ºC CWR16J(1)684(2)(3)A(4)(5) 1 10 12 CWR16J(1)105(2)(3)A(4)(5) 1 10 12 CWR16J(1)155(2)(3)B(4)(5) 1 10 12 CWR16J(1)225(2)(3)B(4)(5) 1 10 12 CWR16J(1)335(2)(3)D(4)(5) 1 10 12 CWR16J(1)475(2)(3)E(4)(5) 1 10 12 CWR16J(1)685(2)(3)E(4)(5) 2 20 24 CWR16J(1)106(2)(3)E(4)(5) 2 20 24 CWR16J(1)106(2)(3)F(4)(5) 2 20 24 CWR16J(1)156(2)(3)F(4)(5) 3 30 36 CWR16J(1)226(2)(3)G(4)(5) 4 40 48 CWR16J(1)336(2)(3)H(4)(5) 6 60 72 CWR16J(1)476(2)(3)H(4)(5) 10 100 120 25 VDC AT + 85 ºC; 17 VDC AT + 125 ºC CWR16K(1)474(2)(3)A(4)(5) 1 10 12 CWR16K(1)105(2)(3)B(4)(5) 1 10 12 CWR16K(1)225(2)(3)D(4)(5) 1 10 12 CWR16K(1)335(2)(3)E(4)(5) 1 10 12 CWR16K(1)685(2)(3)F(4)(5) 2 20 24 CWR16K(1)156(2)(3)G(4)(5) 4 40 48 CWR16K(1)226(2)(3)G(4)(5) 6 60 72 CWR16K(1)226(2)(3)H(4)(5) 6 60 72 CWR16K(1)336(2)(3)H(4)(5) 10 100 120 35 VDC AT + 85 ºC, 23 VDC AT + 125 ºC CWR16M(1)334(2)(3)A(4)(5) 1 10 12 CWR16M(1)685(2)(3)G(4)(5) 3 30 36 CWR16M(1)106(2)(3)H(4)(5) 4 40 48 CWR16M(1)156(2)(3)H(4)(5) 6 60 72
6 6 6 6 6 6 6 6 8 6 6 6 8 8 6 8 8 8 8 8 10 6 6 6 6 6 6 6 6 6 6 8 8 8 6 6 6 6 6 6 6 6 8 6 6 8 6
8 8 8 8 8 8 8 8 12 8 8 8 10 10 8 10 10 10 10 10 12 8 8 8 8 8 8 8 8 8 8 10 10 10 8 8 8 8 8 8 8 8 10 8 8 10 8
Note • Part number definitions: (1) Termination finish: B, C, H (2) Capacitance tolerance: J, K, M (3) Failure rate: B, C, T (4) Surge current: A, B, C, Z (5) Packaging: Blank, /FA, /HR, /PR, /TR Revision: 31-Aug-11 Document Number: 40094 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR16
www.vishay.com
Vishay Sprague
TAPE AND REEL PACKAGING in inches [millimeters]
T2 (max.) 0.024 [0.600] max. 0.157 ± 0.004 [4.0 ± 0.10] Deformation between embossments Top cover tape B1 (max.) (6) K0 Top cover tape For tape feeder reference only including draft. Concentric around B0 0.004 [0.10] max. 0.059 + 0.004 - 0.0 [1.5 + 0.10 - 0.0] 10 pitches cumulative tolerance on tape ± 0.008 [0.200] Embossment 0.079 ± 0.002 0.069 ± 0.004 [2.0 ± 0.05] [1.75 ± 0.10]
A0 B0
0.030 [0.75] min. (3) 0.030 [0.75] min. (4)
F
W
20° Maximum component rotation (Side or front sectional view)
Center lines of cavity
P1 USER DIRECTION OF FEED
D1 (min.) for components . 0.079 x 0.047 [2.0 x 1.2] and larger (5) Maximum cavity size (1)
Cathode (-)
Anode (+) DIRECTION OF FEED 20° maximum component rotation Typical component cavity center line Typical component center line 3.937 [100.0] 0.039 [1.0] max. Tape 0.039 [1.0] max. 0.9843 [250.0] Camber (Top view) Allowable camber to be 0.039/3.937 [1/100] Non-cumulative over 9.843 [250.0]
R min. Bending radius (2)
R minimum: 8 mm = 0.984" (25 mm) 12 mm and 16 mm = 1.181" (30 mm)
B0
Tape and reel specifications: All case sizes are available on plastic embossed tape per EIA-481. Standard reel diameter is 7" (178 mm).
A0 (Top view)
Notes • Metric dimensions will govern. Dimensions in inches are rounded and for reference only. (1) A , B , K , are determined by the maximum dimensions to the ends of the terminals extending from the component body and/or the body 0 0 0 dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent rotation of the component within the cavity of not more than 20°. (2) Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide “R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum. (3) This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed cavities or to the edge of the cavity whichever is less. (4) This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier tape between the embossed cavity or to the edge of the cavity whichever is less. (5) The embossed hole location shall be measured from the sprocket hole controlling the location of the embossement. Dimensions of embossement location shall be applied independent of each other. (6) B dimension is a reference dimension tape feeder clearance only. 1
CARRIER TAPE DIMENSIONS in inches [millimeters]
CASE CODE A B, C, D, E F G, H TAPE SIZE 8 mm 12 mm 12 mm double pitch 16 mm B1 (max.) 0.179 [4.55] 0.323 [8.2] 0.323 [8.2] 0.476 [12.1] D1 (min.) 0.039 [1.0] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] F 0.138 ± 0.002 [3.5 ± 0.05] 0.217 ± 0.002 [5.5 ± 0.05] 0.217 ± 0.002 [5.5 ± 0.05] 0.295 ± 0.004 [7.5 ± 0.1] P1 0.157 ± 0.004 [4.0 ± 0.1] 0.157 ± 0.004 [4.0 ± 0.1] 0.315 ± 0.004 [8.0 ± 0.10] 0.315 ± 0.004 [8.0 ± 0.10] T2 (max.) 0.098 [2.5] 0.256 [6.5] 0.256 [6.5] 0.315 [8.0] W 0.315 ± 0.004 [8.0 ± 0.10] 0.472 ± 0.012 [12.0 ± 0.30] 0.472 ± 0.012 [12.0 ± 0.30] 0.642 max. [16.3] max.
Revision: 31-Aug-11
Document Number: 40094 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CWR16
www.vishay.com
Vishay Sprague
STANDARD PACKAGING QUANTITY
QUANTITY (PCS/REEL) CASE CODE A, B, C, D, E F G H 7", FULL REEL (/TR) 2500 1000 600 600 7", HALF REEL (/HR) 1250 500 300 300 7", PARTIAL REEL (/PR) 100 100 100 100 BULK, PLASTIC TRAY QUANTITY (PCS) 75 75 60 50
Notes • Bulk capacitors are shipped in plastic trays • T level capacitors are only shipped in tape and reel/or waffle packaging. Contact factory for waffle pack quantities.
PAD DIMENSIONS in inches [millimeters]
B
C
B A
CASE CODE A B C D E F G H
WIDTH (A) 0.065 [1.6] 0.065 [1.6] 0.065 [1.6] 0.115 [2.9] 0.115 [2.9] 0.150 [3.8] 0.125 [3.2] 0.165 [4.2]
PAD METALLIZATION (B) 0.50 [1.3] 0.70 [1.8] 0.70 [1.8] 0.70 [1.8] 0.70 [1.8] 0.70 [1.8] 0.70 [1.8] 0.90 [2.3]
SEPARATION (C) 0.040 [1.0] 0.055 [1.4] 0.120 [3.0] 0.070 [1.8] 0.120 [3.0] 0.140 [3.6] 0.170 [4.3] 0.170 [4.3]
POWER DISSIPATION
CASE CODE A B, C D, E F G H MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR 0.060 0.075 0.085 0.110 0.120 0.150
Revision: 31-Aug-11
Document Number: 40094 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1
