CZA04S04150075LEA

CZA Vishay Dale Thick Film Chip Resistor Attenuator, Surface Mount FEATURES • Single component reduces board space and component counts - replaces 3 or more components • Tolerance matching and temperature tracking superior to individual components • Maximum power dissipation: 0.075 W for CZA06S; 0.040 W for CZA04S • Consult factory for extended values, non-standard tolerances, impedance matching and other attenuation values • Frequency range: DC to 3 GHz • Compliant to RoHS directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL CZA04S CZA06S Note • Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material. IMPEDANCE 50 Ω 1 1.5 2 3 4 5 6 10 11 12 13 14 15 16 17 18 19 20 75 Ω 1 1.5 2 3 4 5 6 10 11 12 13 14 15 16 17 18 19 20 100 Ω 1 1.5 2 3 4 5 6 10 11 12 13 14 15 16 17 18 19 20 300 Ω 1 1.5 2 3 4 5 6 10 11 12 13 14 15 16 17 18 19 20 600 Ω 1 1.5 2 3 4 5 6 10 11 12 13 14 15 16 17 18 19 20 POWER RATING P70 °C W 0.040 0.075 IMPEDANCE Ω 50 50/75/100/300/600 ATTENUATION RANGE AND TOLERANCE ± 0.3 dB (L) ± 0.5 dB (H) 1 dB to 5 dB 6 dB to 20 dB 1 dB to 5 dB 6 dB to 20 dB CIRCUIT SCHEMATIC 4-PIN CIRCUIT CZA04S (Marking) (Marking) CZA06S 2 R2 3 1 4 R2 2 3 R2 Attenuation in dB 1 R2 4 R1 R1 Unbalanced π Type Unbalanced π Type TECHNICAL SPECIFICATIONS PARAMETER Rated dissipation at 70 °C VSWR Category temperature range Frequency range UNIT W °C CZA04S 0.040 1.2 max. - 55 to + 125 DC to 3 GHz CZA06S 0.075 1.2 max. - 55 to + 150 DC to 3 GHz GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CZA06S04015050LRT (preferred part numbering format) C MODEL CZA04S CZA06S Z A 0 6 S 0 4 0 1 5 0 5 0 L R T SPECIAL (Dash number) Up to 1 digit Blank = Standard PIN COUNT 04 = 4 pin ATTENUATION IMPEDANCE TOLERANCE 010 = 1.0 dB 050 = 50 Ω H = ± 0.5 dB 015 = 1.5 dB 075 = 75 Ω L = ± 0.3 dB 020 = 2.0 dB 100 = 100 Ω Z = 0 Ω Jumper 150 = 15.0 dB 000 = 0 Ω Jumper 000 = 0 Ω Jumper 04 PIN COUNT 015 ATTENUATION 050 IMPEDANCE PACKAGING EA =Lead (Pb)-free, T/R (all) TD = Tin lead, T/R (04 only) RT = Tin lead, T/R (06 only) Historical Part Number Example: CZA06S04015050LRT (will continiue to be accepted) CZA MODEL 06S CASE SIZE L TOLERANCE RT PACKAGING * Pb containing terminations are not RoHS compliant, excemptions may apply www.vishay.com 254 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31061 Revision: 27-Apr-10 CZA Thick Film Chip Resistor Attenuator, Surface Mount Vishay Dale DIMENSIONS 4-Terminal device S - Version CZA04S Pin 1 CZA06S Pin 1 P CZA04S Pin 1 CZA06S Pin 1 GLOBAL MODEL CZA04S CZA06S DIMENSIONS in inches (millimeters) L 0.039 ± 0.004 (1.00 ± 0.10) 0.063 ± 0.006 (1.60 ± 0.15) W 0.039 ± 0.006 (1.00 ± 0.15) 0.059 ± 0.006 (1.50 ± 0.15) T 0.014 ± 0.004 (0.36 ± 0.10) 0.020 ± 0.004 (0.51 ± 0.10) A 0.013 ± 0.006 (0.33 ± 0.15) 0.024 ± 0.006 (0.61 ± 0.15) P 0.026 (0.65) 0.031 (0.80) B 0.006 ± 0.004 (0.15 ± 0.10) 0.012 ± 0.006 (0.30 ± 0.15) B* 0.010 ± 0.004 (0.25 ± 0.10) 0.012 ± 0.006 (0.30 ± 0.15) SOLDER PAD DIMENSIONS in inches (millimeters) c CZA04S CZA06S Rated Power % w 0.083 (2.10) 0.122 (3.10) d 0.008 (0.20) 0.014 (0.36) 120 100 a 0.018 (0.45) 0.025 (0.63) b 0.032 (0.82) 0.045 (1.15) 0.018 (0.45) 0.031 (0.80) 100 Rated Power % - 25 0 25 50 75 70 100 125 150 175 120 80 80 60 60 40 20 40 20 0 - 55 0 - 55 - 25 0 25 50 Derating CZA04S Ambient Temperature °C Derating CZA06S 70 75 100 125 150 175 Ambient Temperature °C PERFORMANCE TEST Endurance test at 70 °C per EIA 575-3.14 Overload per EIA 575-3.6 Thermal shock Moisture resistance Resistance to soldering heat High temperature exposure Low temperature operations Solderability and leaching CONDITIONS OF TEST 1000 h at 70 °C, 1.5 h “ON”, 0.5 h “OFF” Short time overload Per EIA 575-3.5 Per EIA 575-3.10 10 s at 260 °C solder bath temperature EIA 575 3.8 Per EIA 575-3.7 Per EIA-575-3.6 EIA 575-3.12 TEST RESULTS (TYPICAL TEST LOTS) 0.5 dB to 5 dB ± 0.2 dB ± 0.2 dB ± 0.2 dB ± 0.2 dB ± 0.2 dB ± 0.2 dB ± 0.2 dB 6 dB to 20 dB ± 0.3 dB ± 0.3 dB ± 0.3 dB ± 0.3 dB ± 0.3 dB ± 0.3 dB ± 0.3 dB 95 % coverage Document Number: 31061 Revision: 27-Apr-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 255 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1