ECL

ECL Vishay Roederstein Aluminum Capacitors FEATURES • Polarized aluminum electrolytic capacitors, non solid electrolyte • Extra low impedance, high ripple current • Temperature up to 105 °C • RoHS compliant RoHS COMPLIANT APPLICATIONS • SMD technology, for high mounting density • Industrial and professional applications • General industrial, consumer VALUE 6 x 5.8 to 12.5 x 13.5 10 to 1500 ± 20 6.3 to 100 - 40 to 105 2000 IEC 60384-4/ EN 130300 40/105/56 QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L ) Rated capacitance range CR Capacitance tolerance Rated voltage range Category temperature range Load life Based on sectional specification Climatic category IEC 60068 UNIT mm µF % V °C h • Smoothing, filtering, buffering PACKAGING • Supplied in blister tape SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (µF) 10 22 33 47 68 100 220 330 470 680 1000 1500 RATED VOLTAGE (V) 6.3 → → → → → → 6.3 x 5.8 8 x 6.2 → → 10 x 10 10 x 10 10 → → → → → → 6.3 x 7.7 → 8 x 10 10 x 10 16 → → → → → 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 25 → → → → 6.3 x 5.8 8 x 6.2 8 x 10 35 → → 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 50 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 6.2 8 x 10 10 x 10 - Document Number: 25020 Revision: 17-Jul-08 For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com 287 ECL Vishay Roederstein Aluminum Capacitors DIMENSIONS in millimeters CASE SIZE CODE AD BM AE AF AG AH D±α 6.3 ± 0.5 6.3 ± 0.5 8 ± 0.5 8 ± 0.5 10 ± 0.5 12.5 ± 0.5 Capacitance + ØD±α L±α 5.8 ± 0.3 7.7 ± 0.4 6.2 ± 0.4 10 ± 0.5 10 ± 0.5 13.5 ± 0.5 A±α 2.4 ± 0.2 2.4 ± 0.2 3.3 ± 0.2 2.9 ± 0.2 3.2 ± 0.2 4.6 ± 0.2 B±α 6.6 ± 0.2 6.6 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 10.3 ± 0.2 12.8 ± 0.2 C±α 6.6 ± 0.2 6.6 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 10.3 ± 0.2 12.8 ± 0.2 N max. E±α 2.2 ± 0.2 2.2 ± 0.2 2.3 ± 0.2 3.1 ± 0.2 4.5 ± 0.2 4.5 ± 0.2 R 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.8 ~ 1.1 0.8 ~ 1.1 1.1 ~ 1.4 N 0.3 0.3 0.3 0.3 0.3 0.3 + Positive P max. A±α P 0.5 0.5 0.5 0.5 0.5 0.5 Plastic plateform C±α 22 A 50 B±α Lot no. Voltage E±α A±α L±α R - Negative ELECTRICAL DATA SYMBOL UR CR tan δ RESR IR Z rated voltage rated capacitance at 120 Hz max. dissipation factor at 120 Hz max. equivalent series resistance at 120 Hz rated alternating current at 120 Hz and upper catagory temperature max. impedance at 100 kHz apply at DESCRIPTION ORDERING EXAMPLE ECL 22 µF/50 V, ± 20 %, size 6.3 x 5.8 mm Ordering code: MALSECL00AD222HARK For Standard Packaging Quantity (SPQ) and Minimum Order Quantity (MOQ) please refer to our price list or contact customer service. Note Unless otherwise specified, all electrical values Tamb = 20 °C, P = 86 to 100 kPa, RH = 45 to 75 %. ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR 120 Hz (µF) 220 330 1000 1500 220 470 680 100 220 330 470 68 100 220 DIMENSIONS DxL (mm) 6.3 x 5.8 8 x 6.2 10 x 10 10 x 10 6.3 x 7.7 8 x 10 10 x 10 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 6.3 x 5.8 8 x 6.2 8 x 10 tan δ 120 Hz 0.24 0.24 0.24 0.24 0.19 0.19 0.19 0.16 0.16 0.16 0.16 0.14 0.14 0.14 Z 100 kHz/ 20 °C (Ω) 0.44 0.26 0.09 0.09 0.34 0.17 0.09 0.44 0.26 0.17 0.09 0.44 0.26 0.17 IR 100 kHz/ 105 °C (mA) 230 300 670 670 280 450 670 230 300 450 670 230 300 450 WEIGHT (g) 0.30 0.55 1.21 1.21 0.40 1.00 1.21 0.30 0.55 1.00 1.21 0.30 0.55 1.00 CATALOG NUMBER MALSECL00AD322BARK MALSECL00AE333BARK MALSECL00AG410BARK MALSECL00AG415BARK MALSECL00BM322CARK MALSECL00AF347CARK MALSECL00AG368CARK MALSECL00AD310DARK MALSECL00AE322DARK MALSECL00AF333DARK MALSECL00AG347DARK MALSECL00AD268EARK MALSECL00AE310EARK MALSECL00AF322EARK Document Number: 25020 Revision: 17-Jul-08 6.3 10 16 25 www.vishay.com 288 For technical questions, contact: aluminumcaps1@vishay.com ECL Aluminum Capacitors Vishay Roederstein ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR 120 Hz (µF) 33 47 68 100 220 10 22 33 47 68 100 DIMENSIONS DxL (mm) 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 6.2 8 x 10 10 x 10 tan δ 120 Hz 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 Z 100 kHz/ 20 °C (Ω) 0.44 0.44 0.26 0.17 0.09 0.88 0.88 0.63 0.63 0.34 0.18 IR 100 kHz/ 105 °C (mA) 230 230 300 450 670 165 165 300 300 450 670 WEIGHT (g) 0.30 0.30 0.55 1.00 1.21 0.30 0.30 0.55 0.55 1.00 1.21 CATALOG NUMBER MALSECL00AD233FARK MALSECL00AD247FARK MALSECL00AE268FARK MALSECL00AF310FARK MALSECL00AG322FARK MALSECL00AD210HARK MALSECL00AD222HARK MALSECL00AE233HARK MALSECL00AE247HARK MALSECL00AF268HARK MALSECL00AG310HARK 35 50 REFLOW SOLDERING CONDITIONS FOR SMD ALUMINUM ELECTROLYTIC CAPACITORS TP Ramp-up TL Ts max. tP Critical Zone TL to TP Temperature tL Ts min. ts Preheat Ramp-down t 25 °C to Peak Time PROFILE FEATURE SOLDERING CONDITION Ø 4 ~ Ø 10 Average ramp-up rate (TL to TP) Preheat Temperature min. (Ts min.) Temperature max. (Ts max.) Time (Ts min. to Ts max.) Ts max. to TL Ramp-up rate Time maintained above Temperature (TL) Time (tL) Document Number: 25020 Revision: 17-Jul-08 217 °C 60 ~ 90 s For technical questions, contact: aluminumcaps1@vishay.com 217 °C 40 ~ 60 s www.vishay.com 289 3 °C/s max. 3 °C/s max. 150 °C 200 °C 60 ~ 150 s 40 ~ 120 s 150 °C 200 °C 40 ~ 100 s 3 °C/s max. Ø 12.5 3 °C/s max. Ø 16 ECL Vishay Roederstein PROFILE FEATURE Peak/classification temperature (TP) Time within 5 °C of actual peak temperature (TP) Ramp-down rate Time 25 °C to peak temperature 250 °C 10 s max. 3 °C/s max. 8 min max. 240 °C 10 s max. 3 °C/s max. 8 min max. 230 °C Aluminum Capacitors RESISTANCE TO SOLDERING HEAT Leakage current Capacitance value tan δ Less than specified value Within ± 10 % of initial value Less than specified value LOW TEMPERATURE BEHAVIOR (at 120 Hz) IMPEDANCE RATIO (Z) T2/(Z) T1 T2/T1 - 25 °C/+ 20 °C - 40 °C/+ 20 °C 6.3 2 3 10 2 3 16 2 3 RATED VOLTAGE (V) 25 2 3 35 2 3 50 2 3 63 3 4 100 3 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 50 120 300 1000 10 000 100 000 IR MULTIPLIER 0.41 0.59 0.69 0.80 0.88 1.00 ADDITIONAL ELECTRICAL DATA PARAMETER Current Leakage current (Test conditions: UR, 20 °C) Resistance Equivalent series resistance (ESR) Calculated from tan δmax. ESR = tan δ/2 π f CR After 2 min at UR IL2 ≤ 0.01 x CR x UR or 3 µA for UR ≤ 100 V (whichever is greater) CONDITIONS VALUE TEST PROCEDURES AND REQUIREMENTS TEST Load life PROCEDURE (QUICK REFERENCE) Tamb = 105 °C UR and IR applied After 2000 h No voltage applied After 1000 h After test: UR to be applied for 30 min 24 to 48 h before measurement REQUIREMENTS ΔC/C: ± 25 % of initial value IL ≤ spec. limit tan δ ≤ 2 x spec. limit ΔC/C: ± 25 % of initial value IL ≤ spec. limit tan δ ≤ 2 x spec. limit Shelf life www.vishay.com 290 For technical questions, contact: aluminumcaps1@vishay.com Document Number: 25020 Revision: 17-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1