ES07B, ES07D
Vishay Semiconductors
Small Surface Mount Ultrafast Diodes
Features
• • • • • For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering: 260 °C/10 s at terminals • Wave and reflow solderable • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC
17249
Mechanical Data
Case: DO-219AB (SMF) Polarity: band denotes cathode end Weight: approx. 15 mg Packaging codes/options: GS18/10K per 13" reel (8 mm tape) GS08/3K per 7" reel (8 mm tape)
Parts Table
Part ES07B ES07D Ordering code ES07B-GS18 or ES07B-GS08 ES07D-GS18 or ES07D-GS08 Marking EB ED Remarks Tape and reel Tape and reel
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Ttp = 105 °C TA = 65 °C 1) TL = 25 °C Test condition Part ES07B ES07D ES07B ES07D ES07B ES07D Symbol VRRM VRRM VRMS VRMS VDC VDC IF(AV) IF(AV) IFSM Value 100 200 70 140 100 200 1.2 0.5 30 Unit V V V V V V A A A
Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave
Note: 1) Mounted on epoxy glass PCB with 3 mm x 3 mm, Cu pads (≥ 40 µm thick)
Document Number 85737 Rev. 1.9, 20-Aug-10
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 1
ES07B, ES07D
Vishay Semiconductors Thermal Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter Thermal resistance junction to ambient air Operating junction and storage temperature range Note: 1) Mounted on epoxy glass PCB with 3 x 3 mm, Cu pads (≥ 40 µm thick)
1)
Test condition
Symbol RthJA Tj, Tstg
Value 180 - 55 to + 150
Unit K/W °C
Electrical Characteristics
Parameter Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Reverse recovery time Typical capacitance
Tamb = 25 °C, unless otherwise specified
Test condition 1A
1)
Symbol VF IR IR trr Cj
Min.
Typ.
Max. 0.98 10 50 25
Unit V µA µA ns pF
TA = 25 °C TA = 100 °C IF = 0.5 A, IR = 1 A, Irr = 0.25 A 4 V, 1 MHz
4
Note: 1) Pulse test, 300 μs pulse with 1 % duty cycle
Typical Characteristics
10
Tamb = 25 °C, unless otherwise specified
7 f = 1 MHz 6
1
5 CD (pF)
1.4
IF (A)
4 3 2 1 0 0.1
0.1 Typical at 150 °C 0.01 Typical at 100 °C Typical at 25 °C 0.001 0 0.2 0.4 0.6 0.8 1.0 1.2
1 VR (V)
10
100
18242
VF (V)
18244
Figure 1. Typical Forward Characteristics
Figure 3. Typ. Diode Capacitance vs. Reverse Voltage
1.4 Tie point temperature
1000
Tj = 150 °C Tj = 125 °C
Average Forward Current (A)
1.2 1.0 0.8 0.6 0.4 Ambient temperature 0.2 0 IR (µA)
100
10
Tj = 100 °C Tj = 75 °C
1
Tj = 50 °C Tj = 25 °C Tj = 0 °C Tj = - 50 °C
0.1
0.01
0 25 50 75 100 125 150
18245
0
40
80
120
160
200
18243
Temperature (Ambient or Tie) (°C)
VR (V)
Figure 2. Forward Current Derating Curve
Figure 4. Typical Reverse Characteristics
www.vishay.com 2
For technical questions within your region, please contact one of the following: Document Number 85737 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.9, 20-Aug-10
ES07B, ES07D
Vishay Semiconductors Package Dimensions in millimeters (inches): DO-219AB (SMF)
0.85 (0.033) 0.35 (0.014)
0.25 (0.010)
0.05 (0.002)
0.1 (0.004)
5
1.7 (0.067)
1.9 (0.075)
1.2 (0.047) 0.8 (0.031)
0 (0.000)
Detail Z enlarged
1.08 (0.043) 2.9 (0.114) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) 0.88 (0.035)
Foot print recommendation:
1.3 (0.051)
1.3 (0.051)
Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4)
17247
1.4 (0.055)
2.9 (0.114)
Document Number 85737 Rev. 1.9, 20-Aug-10
5
For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com 3
ES07B, ES07D
Vishay Semiconductors Blistertape Dimensions for SMF in millimeters
PS
Document-No.: S8-V-3717.02-001 (3)
18513
www.vishay.com 4
For technical questions within your region, please contact one of the following: Document Number 85737 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.9, 20-Aug-10
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
