ES2B

ES2A thru ES2D Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ideal for automated placement • Ultrafast recovery times for high efficiency • Low forward voltage, low power losses • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. 2.0 A 50 V to 200 V 50 A 20 ns 0.90 V 150 °C DO-214AA (SMB) PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. MECHANICAL DATA Case: DO-214AA (SMB) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL = 110 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM VRMS VDC IF(AV) IFSM TJ, TSTG SYMBOL ES2A EA 50 35 50 ES2B EB 100 70 100 2.0 50 - 55 to + 150 ES2C EC 150 105 150 ES2D ED 200 140 200 V V V A A °C UNIT ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum DC reverse current at rated DC blocking voltage Document Number: 88587 Revision: 27-Aug-07 2.0 A TA = 25 °C TA = 100 °C TEST CONDITIONS SYMBOL VF IR ES2A ES2B 0.90 10 350 ES2C ES2D UNIT V µA For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 ES2A thru ES2D Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Max. reverse recovery time TEST CONDITIONS IF = 0.5 A, IR = 1.0 A, lrr = 0.25 A IF = 2.0 A, VR = 30 V, dI/dt = 50 A/µs, Ir = 10 % IRM IF = 2.0 A, VR = 30 V, dI/dt = 50 A/µs, Ir = 10 % IRM 4.0 V, 1 MHz TJ = 25 °C TJ = 100 °C TJ = 25 °C TJ = 100 °C SYMBOL trr ES2A ES2B 20 30 50 10 25 18 ES2C ES2D UNIT ns Maximum reverse recovery time trr ns Maximum stored charge Typical junction capacitance Note: Qrr CJ nC pF (1) Pulse test: 300 ms pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) Units mounted on P.C.B. 5.0 x 5.0 mm (0.013 mm thick) land areas SYMBOL RθJA RθJL ES2A ES2B 75 20 ES2C ES2D UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N ES2D-E3/52T ES2D-E3/5BT ES2DHE3/52T (1) ES2DHE3/5BT (1) Note: (1) Automotive grade AEC Q101 qualified UNIT WEIGHT (g) 0.096 0.096 0.096 0.096 PREFERRED PACKAGE CODE 52T 5BT 52T 5BT BASE QUANTITY 750 3200 750 3200 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 3.0 60 Average Forward Rectified Current (A) Peak Forward Surge Current (A) 50 8.3 ms Single Half Sine-Wave at TL = 110 °C 2.0 40 30 1.0 Resistive or Inductive Load P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0 80 90 100 110 120 130 140 150 20 10 0 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88587 Revision: 27-Aug-07 ES2A thru ES2D Vishay General Semiconductor 100 60 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 TJ = 150 °C Junction Capacitance (pF) 1.4 50 40 TJ = 125 °C 1 TJ = 100 °C 30 20 0.1 TJ = 25 °C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 10 0 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 10 000 Instantaneous Reverse Leakage Current (µA) TJ = 150 °C 1000 TJ = 125 °C TJ = 100 °C 100 10 TJ = 25 °C 1 0.1 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Mounting Pad Layout Cathode Band 0.085 MAX. (2.159 MAX.) 0.086 (2.20) 0.077 (1.95) 0.155 (3.94) 0.130 (3.30) 0.086 MIN. (2.18 MIN.) 0.180 (4.57) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 MIN. (1.52 MIN.) 0.220 REF. 0.060 (1.52) 0.030 (0.76) 0.220 (5.59) 0.205 (5.21) 0.008 (0.2) 0 (0) Document Number: 88587 Revision: 27-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1