ESH1D-M3-61T

New Product ESH1B, ESH1C, ESH1D Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifier FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Ultrafast recovery times for high efficiency • Low forward voltage, low power loss • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DO-214AC (SMA) • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) VRRM trr VF TJ max. 1.0 A 100 V, 150 V, 200 V 25 ns 0.90 V 175 °C For use in secondary rectification and freewheeling for ultrafast switching speeds AC/AC and DC/DC converters in high temperature conditions for both consumer applications. MECHANICAL DATA Case: DO-214AC (SMA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end per MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL = 150 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating junction and storage temperature range VRRM VRMS VDC IF(AV) IFSM TJ, TSTG SYMBOL ESH1B EHB 100 70 100 ESH1C EHC 150 105 150 1.0 50 - 55 to + 175 ESH1D EHD 200 140 200 V V V A A °C UNIT Document Number: 89401 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product ESH1B, ESH1C, ESH1D Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Maximum reverse current Maximum reverse recovery time Typical reverse recovery time VR = 20 V, TJ = 150 °C IF = 0.5 A, IR = 1 A, Irr = 0.25 A IF = 0.6 A, VR = 30 V, dI/dt = 50 A/μs, Irr = 10 % IRM IF = 0.6 A, VR = 30 V, dI/dt = 50 A/μs, Irr = 10 % IRM 4.0 V, 1 MHz TJ = 25 °C TJ = 100 °C TJ = 25 °C TJ = 100 °C IF = 0.7 A IF = 1 A TA = 25 °C TA = 125 °C TEST CONDITIONS SYMBOL VF (1) VF IR IR trr trr VALUE 0.87 V 0.90 1.0 μA 25 50 25 25 ns 35 10 Qrr CJ nC 15 25 pF μA ns UNIT Typical stored charge Typical junction capacitance Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance Note Units mounted on PCB with 5.0 mm x 5.0 mm (0.013 mm thick) land areas SYMBOL RJA (1) ESH1B ESH1C 85 ESH1D UNIT °C/W RJL (1) 30 (1) ORDERING INFORMATION (Example) PREFERRED P/N ESH1D-M3/61T ESH1D-M3/5AT UNIT WEIGHT (g) 0.064 0.064 PREFERRED PACKAGE CODE 61T 5AT BASE QUANTITY 1800 7500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.2 50 Average Forward Rectified Current (A) 1.0 Peak Forward Surge Current (A) 145 155 165 175 40 0.8 30 0.6 TL Measured at the Cathode Band Terminal 20 0.4 0.2 10 0 95 105 115 125 135 0 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Maximum Forward Current Derating Curve www.vishay.com 2 Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current For technical questions within your region, please contact one of the following: Document Number: 89401 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 19-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product ESH1B, ESH1C, ESH1D Vishay General Semiconductor 100 TJ = 175 °C 100 TJ = 150 °C Instantaneous Reverse Leakage Current (µA) 10 TJ = 125 °C TJ = 100 °C 0.1 1 Junction Capacitance (pF) 80 100 10 0.01 TJ = 25 °C 0.001 20 1 40 60 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) Reverse Voltage (V) Fig. 3 - Typical Reverse Leakage Characteristics Fig. 5 - Typical Junction Capacitance 100 100 TJ = 125 °C 10 TJ = 150 °C 1 TJ = 175 °C TJ = 25 °C Transient Thermal Impedance (°C/W) 1.4 Instantaneous Forward Current (A) 10 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 4 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.066 (1.68) MIN. 0.074 (1.88) MAX. 0.065 (1.65) 0.049 (1.25) 0.110 (2.79) 0.100 (2.54) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Document Number: 89401 Revision: 19-Apr-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1