ESH1D

ESH1B, ESH1C & ESH1D Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifiers FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Ultrafast recovery times for high efficiency • Low forward voltage, low power loss • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C DO-214AC (SMA) • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in secondary rectification and freewheeling for ultrafast switching speeds ac-to-ac and dc-to-dc converters in high temperature conditions for both consumer and automotive applications. MECHANICAL DATA Case: DO-214AC (SMA) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end PRIMARY CHARACTERISTICS IF(AV) VRRM trr VF TJ max. 1A 100 V, 150 V, 200 V 25 ns 0.90 V 175 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL = 150 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Operating junction and storage temperature range VRRM VRMS VDC IF(AV) IFSM TJ, TSTG SYMBOL ESH1B EHB 100 70 100 ESH1C EHC 150 105 150 1.0 50 - 55 to + 175 ESH1D EHD 200 140 200 V V V A A °C UNIT Document Number: 88890 Revision: 27-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 ESH1B, ESH1C & ESH1D Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Maximum reverse current Maximum reverse recovery time Typical reverse recovery time Typical stored charge Typical junction capacitance VR = 20 V, TJ = 150 °C IF = 0.5 A, IR = 1 A, Irr = 0.25 A IF = 0.6 A, VR = 30 V, dI/dt = 50 A/µs, Irr = 10 % IRM IF = 0.6 A, VR = 30 V, dI/dt = 50 A/µs, Irr = 10 % IRM 4.0 V, 1 MHz TJ = 25 °C TJ = 100 °C TJ = 25 °C TJ = 100 °C IF = 0.7 A IF = 1 A TEST CONDITIONS (1) SYMBOL VF TA = 25 °C TA = 125 °C IR IR trr trr Qrr CJ VALUE 0.87 0.90 1.0 25 50 25 25 35 10 15 25 UNIT V µA µA ns ns nC pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) Units mounted on P.C.B. with 5.0 x 5.0 mm (0.013 mm thick) land areas SYMBOL RθJA RθJL ESH1B ESH1C 85 30 ESH1D UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N ESH1D-E3/61T ESH1D-E3/5AT ESH1DHE3/61T (1) ESH1DHE3/5AT (1) UNIT WEIGHT (g) 0.064 0.064 0.064 0.064 PREFERRED PACKAGE CODE 61T 5AT 61T 5AT BASE QUANTITY 1800 7500 1800 7500 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.2 50 Average Forward Rectified Current (A) 1.0 Peak Forward Surge Current (A) 145 155 165 175 40 0.8 30 0.6 TL Measured at the Cathode Band Terminal 20 0.4 0.2 10 0 95 105 115 125 135 0 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88890 Revision: 27-Aug-07 ESH1B, ESH1C & ESH1D Vishay General Semiconductor 100 TJ = 175 °C 100 TJ = 150 °C Instantaneous Reverse Leakage Current (µA) 10 TJ = 125 °C TJ = 100 °C 0.1 1 Junction Capacitance (pF) 80 100 10 0.01 TJ = 125 °C 0.001 20 1 40 60 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) Reverse Voltage (V) Figure 3. Typical Reverse Leakage Characteristics Figure 5. Typical Junction Capacitance 100 100 TJ = 125 °C 10 TJ = 150 °C 1 TJ = 175 °C TJ = 25 °C Transient Thermal Impedance (°C/W) 1.4 Instantaneous Forward Current (A) 10 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 4. Typical Instantaneous Forward Characteristics Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AC (SMA) Cathode Band Mounting Pad Layout 0.066 (1.68) MIN. 0.074 (1.88) MAX. 0.065 (1.65) 0.049 (1.25) 0.110 (2.79) 0.100 (2.54) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Document Number: 88890 Revision: 27-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1