ESH1PB

New Product ESH1PB, ESH1PC & ESH1PD Vishay General Semiconductor High Current Density Surface Mount Ultrafast Rectifiers FEATURES • Very low profile - typical height of 1.0 mm • Ideal for automated placement • Glass passivated chip junction • Ultrafast recovery times for high frequency • Low forward voltage drop, low power loss • Low thermal resistance DO-220AA (SMP) eSMPTM Series • Meets MSL level 1 per J-STD-020C, LF max peak of 260 °C • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in secondary rectification and freewheeling for ultrafast switching speeds of ac-to-ac and dc-to-dc converters in high temperature conditions for both consumer and automotive applications. MECHANICAL DATA Case: DO-220AA (SMP) Epoxy meets UL-94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Color band denotes cathode end MAJOR RATINGS AND CHARACTERISTICS IF(AV) VRRM trr VF Tj max. 1A 100 V, 150 V, 200 V 25 ns 0.90 V 175 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 10 ms single half sinewave superimposed on rated load Operating junction and storage temperature range VRRM IF(AV) IFSM TJ, TSTG SYMBOL ESH1PB PB 100 ESH1PC PC 150 1.0 50 - 55 to + 175 ESH1PD PD 200 V A A °C UNIT ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) TEST CONDITIONS at IF = 0.7 A, Tj = 25 °C at IF = 1 A, Tj = 25 °C SYMBOL VF IR IR VALUE 0.86 0.90 1.0 25 50 UNIT V µA µA Maximum reverse current at rated Tj = 25 °C VR (1) voltage Tj = 125 °C Maximum reverse current at VR = 20 V, Tj = 150 °C Document Number: 88895 Revision: 25-Jun-07 www.vishay.com 1 New Product ESH1PB, ESH1PC & ESH1PD Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum reverse recovery time Typical reverse recovery time Typical reverse recovery time Typical junction capacitance Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle TEST CONDITIONS at IF = 0.5 A, IR = 1 A, Irr = 0.25 A at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 25 °C at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 100 °C at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 25 °C at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 100 °C at 4.0 V, 1 MHz SYMBOL trr trr Qrr CJ VALUE 25 25 35 10 15 25 UNIT ns ns nC pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 5.0 x 5.0 mm copper pad areas. RθJL is measured at the terminal of cathode band. RθJC is measured at the top centre of the body SYMBOL RθJA RθJL RθJC ESH1PB ESH1PC 105 15 20 ESH1PD UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N ESH1PB-E3/84A ESH1PB-E3/85A ESH1PBHE3/84A (1) ESH1PBHE3/85A (1) Note: (1) Automotive grade AEC Q101 qualified UNIT WEIGHT (g) 0.024 0.024 0.024 0.024 PREFERRED PACKAGE CODE 84A 85A 84A 85A BASE QUANTITY 3000 10000 3000 10000 DELIVERY MODE 7" Diameter Plastic Tape & Reel 13" Diameter Plastic Tape & Reel 7" Diameter Plastic Tape & Reel 13" Diameter Plastic Tape & Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.2 50 Average Forward Rectified Current (A) 1.0 0.8 Peak Forward Surge Current (A) 40 30 0.6 0.4 TL measured at the cathode band terminal 20 0.2 0 95 10 0 105 115 125 135 145 155 165 175 1 10 100 Lead Temperature (°C) Number of Cycles at 50 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 Document Number: 88895 Revision: 25-Jun-07 New Product ESH1PB, ESH1PC & ESH1PD Vishay General Semiconductor 100 1000 Instantaneous Forward Current (A) 10 Tj = 175 °C Tj = 150 °C Junction Capacitance (pF) 1.6 100 1 Tj = 25 °C 0.1 10 Tj = 125 °C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 1000 1000 100 Tj = 175 °C Transient Thermal Impedance (°C/W) 80 90 100 Instantaneous Reverse Current (µA) Tj = 150 °C 10 Tj = 125 °C 1 100 10 0.1 Tj = 25 °C 0.01 10 20 30 40 50 60 70 1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Leakage Characteristics Figure 6. Typical Transient Thermal impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) Cathode band 0.012 (0.30) REF 0.086 (2.18) 0.074 (1.88) 0.053 (1.35) 0.041 (1.05) 0.036 (0.91) 0.024 (0.61) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.013 (0.35) 0.004 (0.10) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.000 (0.00) 0.100 (2.54) 0.018 (0.45) 0.006 (0.15) 0.105 (2.67) 0.025 (0.635) 0.030 (0.762) 0.050 (1.27) Document Number: 88895 Revision: 25-Jun-07 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1