ESH2PC

New Product ESH2PB, ESH2PC & ESH2PD Vishay General Semiconductor High Current Density Surface Mount Ultrafast Rectifiers FEATURES eSMP TM Series • Very low profile - typical height of 1.0 mm • Ideal for automated placement • Glass passivated chip junction • Ultrafast recovery times for high frequency • Low forward voltage drop, low power loss • Low thermal resistance • Meets MSL level 1 per J-STD-020, LF maximum peak of 260 °C • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in secondary rectification and freewheeling for ultrafast switching speeds of ac-to-ac and dc-to-dc converters in high temperature conditions for both consumer and automotive applications. 2A DO-220AA (SMP) PRIMARY CHARACTERISTICS IF(AV) VRRM trr VF at IF = 2 A TJ max. 100 V, 150 V, 200 V 25 ns 0.75 V 175 °C MECHANICAL DATA Case: DO-220AA (SMP) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 10 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range VRRM IF(AV) IFSM TJ, TSTG SYMBOL ESH2PB P2B 100 ESH2PC P2C 150 2.0 50 - 55 to + 175 ESH2PD P2D 200 V A A °C UNIT ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum reverse current (2) IF = 2 A rated VR TEST CONDITIONS TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C SYMBOL VF IR TYP. 0.90 0.75 0.2 12.6 MAX. 0.98 0.82 1.0 25 UNIT V µA Document Number: 89016 Revision: 13-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product ESH2PB, ESH2PC & ESH2PD Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum reverse recovery time Typical reverse recovery time Typical stored charge Typical junction capacitance TEST CONDITIONS IF = 0.5 A, IR = 1 A, Irr = 0.25 A IF = 1.0 A, VR = 30 V, dI/dt = 50 A/µs, Irr = 10 % IRM 4.0 V, 1 MHz TJ = 25 °C TJ = 100 °C SYMBOL trr trr Qrr CJ TYP. MAX. 25 25 35 10 15 25 UNIT ns ns nC pF Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) SYMBOL RθJA RθJL RθJC ESH2PB ESH2PC 80 15 22 ESH2PD UNIT °C/W Note: (1) Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 6.0 x 6.0 mm copper pad areas. RθJL is measured at the terminal of cathode band. RθJC is measured at the top centre of the body ORDERING INFORMATION (Example) PREFERRED P/N ESH2PB-E3/84A ESH2PB-E3/85A ESH2PBHE3/84A (1) ESH2PBHE3/85A (1) UNIT WEIGHT (g) 0.024 0.024 0.024 0.024 PREFERRED PACKAGE CODE 84A 85A 84A 85A BASE QUANTITY 3000 10 000 3000 10 000 DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 2.4 50 Average Forward Rectified Current (A) 2.0 Peak Forward Surge Current (A) 40 1.6 30 1.2 20 0.8 TL Measured at the Cathode Band Terminal 0.4 10 0 95 105 115 125 135 145 155 165 175 0 1 10 100 Lead Temperature (°C) Number of Cycles at 50 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 89016 Revision: 13-May-08 New Product ESH2PB, ESH2PC & ESH2PD Vishay General Semiconductor 100 1000 Instantaneous Forward Current (A) 10 TJ = 175 °C TJ = 150 °C Junction Capacitance (pF) 1.6 100 1 TJ = 25 °C 0.1 10 TJ = 125 °C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 1000 Instantaneous Reverse Current (µA) 100 TJ = 175 °C 10 TJ = 150 °C TJ = 125 °C 1 0.1 TJ = 25 °C 0.01 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) Cathode band 0.012 (0.30) REF. 0.086 (2.18) 0.074 (1.88) 0.053 (1.35) 0.041 (1.05) 0.036 (0.91) 0.024 (0.61) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) 0.100 (2.54) 0.025 0.030 (0.635) (0.762) 0.050 (1.27) Document Number: 89016 Revision: 13-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1