F1772-433-20

F1772-2000 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 275 V (MKT) Dimensions in mm L W FEATURES: Product is completely lead (Pb)-free Product is RoHS compliant Pb-free CAPACITANCE TOLERANCE: H Standard: ± 10 % e3 RoHS COMPLIANT DISSIPATION FACTOR TANδ: < 1 % measured at 1 KHz pcm ± 0.4 X INSULATION RESISTANCE: FOR C ≤ 0.33 µF: 30 GΩ average value 15 GΩ minimum value pcm ± 0.4 Ø 0.8 TIME CONSTANT FOR C > 0.33 µF: LEAD LENGTH X (mm) 4-1 6-1 15-1 30+5 Electrode Free margin Dielectric Center margin ORDERING CODE** F1772-. . .-2004 F1772-. . .-2000 F1772-. . .-2015 F1772-. . .-2030 10 000 sec. average value 5000 sec. minimum value TEST VOLTAGE: (Electrode/electrode): DC 2150 V/2 sec. REFERENCE STANDARDS: EN 132 400, 1994 EN 60068-1 IEC 60384-14/2, 1993 UL 1283 UL 1414 CSA 22.2 No. 8-M 86 CSA 22.2 No. 1-M 90 MAXIMUM PULSE RISE TIME: (du/dt) in V/µs RATED VOLTAGE AC 275 V PITCH (mm) 15.0 200 22.5 150 27.5 100 37.5 100 DIELECTRIC: Polyester film ELECTRODES: Metal evaporated RATED VOLTAGE: AC 275 V, 50/60 Hz CONSTRUCTION: Metallized film capacitor Internal series connection Between interconnected terminations and case (foil method): AC 2500 V for 2 sec. at 25 °C. Z [Ω] 10 1 PERMISSIBLE DC VOLTAGE: DC 630 V TERMINALS: Radial tinned copper wire COATING: Plastic case, epoxy resin sealed, flame retardant UL 94V-0 10 0 0.47 µF E12 series 0.01 µFX2 - 2.2 µFX2 preferred values acc. to E6 10 -2 10 -3 0.01 2.2 µF 1.5 µF 1 µF 0.68 µF 0.33 µF CAPACITANCE RANGE: 0.15 µF 0.068 µF 0.033 µF 0.015 µF 0.01 µF 40/100/56 10 0.22 µF -1 0.1 µF CLIMATIC TESTING CLASS ACC.TO EN 60068-1: 0.047 µF 0.022 µF 0.05 0.1 0.5 1.0 5.0 10 50 100 f [MHz] Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average). Measurement with lead length 6 mm. Document Number: 26503 Revision: 11-Jun-07 To contact us: RFI@vishay.com www.vishay.com 25 F1772-2000 Vishay Roederstein APPROVALS COUNTRY U.S.A. (for AC 250 V) Canada (for AC 250 V) SPECIFICATION UL 1283 UL 1414 C 22.2 No. 8-M 1986 C 22.2 No. 1-M 1994 EN 132 400; 1999-06 IEC 60384-14, 2nd edition; 1993-07, Table II + A1: 1995-06 ELECTRICAL VALUES 0.01 - 2.2 µFX 0.01 - 1.0 µFX 0.01 - 2.2 µFX 0.01 - 0.82 µFX 0.01 - 2.2 µFX2 0.01 - 2.2 µFX2 APPROVAL REFERENCE E 76297 E 100682 LR 64546 LR 64546-8 DE 1-8790 40005079 APPROVAL MARK AC-Capacitors, Suppression Capacitors Class X2 AC 275 V (MKT) CB TEST-CERTIFICATE (for AC 275 V) Germany 10 This approval mark together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the CB-Agreement): Austria France Netherlands Japan Singapore Belgium Germany Israel Norway Rep. of Korea Denmark Ireland Portugal China Hungary Finland Italy Spain Poland Iceland QUANTITY PACKAGE LEAD LENGTH < = 6-1 mm (pcs)** 750 750 750 750 750 750 750 500 500 500 450 325 325 325 235 235 200 170 170 125 125 125 110 100 100 80 80 70 60 Sweden Switzerland Great Britain Czech. Republic Slovenia CAPACITANCE TOL. (%) PITCH (mm) BOX NO. DIMENSIONS W x H x L (mm) (+ 0.2/- 0.4 mm) WEIGHT LEAD LENGTH 6-1 mm (g) ORDERING CODE*** 0.01 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-310-20 . . 0.012 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-312-20 . . 0.015 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-315-20 . . 0.018 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-318-20 . . 0.022 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-322-20 . . 0.027 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-327-20 . . 0.033 µFX2 ± 10 15.0 05 5.3 x 10.3 x 17.8 1.4 F1772-333-20 . . 0.039 µFX2 ± 10 15.0 06 6.3 x 12.3 x 17.8 2.0 F1772-339-20 . . 0.047 µFX2 ± 10 15.0 06 6.3 x 12.3 x 17.8 2.0 F1772-347-20 . . 0.056 µFX2 ± 10 15.0 06 6.3 x 12.3 x 17.8 2.0 F1772-356-20 . . 0.068 µFX2 ± 10 15.0 07 7.3 x 13.3 x 17.8 2.4 F1772-368-20 . . 0.082 µFX2 ± 10 15.0 08 8.3 x 14.3 x 17.8 2.7 F1772-382-20 . . 0.1 µFX2 ± 10 15.0* 08 8.3 x 14.3 x 17.8 2.7 F1772-410-20 . . 0.12 µFX2 ± 10 15.0* 08 8.3 x 14.3 x 17.8 2.7 F1772-412-20 . . 0.15 µFX2 ± 10 22.5* 11 7.3 x 15.3 x 26.3 4.1 F1772-415-20 . . 0.18 µFX2 ± 10 22.5* 11 7.3 x 15.3 x 26.3 4.1 F1772-418-20 . . 0.22 µFX2 ± 10 22.5* 12 8.3 x 16.3 x 26.3 4.6 F1772-422-20 . . 0.27 µFX2 ± 10 22.5* 13 10.3 x 18.3 x 26.3 6.7 F1772-427-20 . . 0.33 µFX2 ± 10 22.5* 13 10.3 x 18.3 x 26.3 6.7 F1772-433-20 . . 0.39 µFX2 ± 10 27.5* 14 11.0 x 20.3 x 31.3 9.1 F1772-439-20 . . 0.47 µFX2 ± 10 27.5* 14 11.0 x 20.3 x 31.3 9.1 F1772-447-20 . . 0.56 µFX2 ± 10 27.5* 14 11.0 x 20.3 x 31.3 9.1 F1772-456-20 . . 0.68 µFX2 ± 10 27.5* 15 13.0 x 23.3 x 31.3 12.9 F1772-468-20 . . 0.82 µFX2 ± 10 27.5* 15 13.0 x 23.3 x 31.3 15.0 F1772-482-20 . . 1.0 µFX2 ± 10 27.5* 18 14.5 x 24.3 x 31.3 15.0 F1772-510-20 . . 1.2 µFX2 ± 10 37.5* 16 14.0 x 24.3 x 41.3 18.9 F1772-512-20 . . 1.5 µFX2 ± 10 37.5* 19 15.5 x 28.3 x 41.3 18.9 F1772-515-20 . . 1.8 µFX2 ± 10 37.5* 19 15.5 x 28.3 x 41.3 24.0 F1772-518-20 . . 2.2 µFX2 ± 10 37.5* 20 17.8 x 32.3 x 41.3 31.6 F1772-522-20 . . Preferred values in bold print. Inbuilt discharging resistor on request (with larger case dimensions). * Different pitch on request. ** Further information about packaging quantities with different lead length and/or taped versions see Document No 27608 (Packing Quantities) Use Box No as reference *** These capacitors can be delivered on continuous tape and reel - see page 12/13 (Document Number 27622). The ordering code is F1772-. . .-2900 at H = 16.5 mm, F1772-. . .-2901 at H = 18.5 mm. www.vishay.com 26 To contact us: RFI@vishay.com Document Number: 26503 Revision: 11-Jun-07 F1772-2000 AC-Capacitors, Suppression Capacitors Class X2 AC 275 V (MKT) APPLICATION NOTES • For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V (AC). • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. • These capacitors can be used for series impedance application in case safety approvals are requested. • The maximum ambient temperature must not exceed 100 °C. • Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (DC) and divided by the applied voltage. Vishay Roederstein Document Number: 26503 Revision: 11-Jun-07 To contact us: RFI@vishay.com www.vishay.com 27 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1