F1772-468-326

F1772-3200 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 300 V (MKT) Dimensions in mm L W FEATURES: Product is completely lead (Pb)-free Product is RoHS compliant Pb-free CAPACITANCE TOLERANCE: Standard: ± 20 % H e3 RoHS COMPLIANT DISSIPATION FACTOR TANδ: < 1 % measured at 1 kHz ± 0.4 X INSULATION RESISTANCE: FOR C ≤ 0.33 µF: 30 GΩ average value 15 GΩ minimum value pcm ± 0.4 Ø 0.8 TIME CONSTANT FOR C > 0.33 µF: LEAD LENGTH X (mm) 4-1 6-1 15-1 30+5 ORDERING CODE** F1772-. . .-3204/3264 F1772-. . .-3200/3260 F1772-. . .-3215/3265 F1772-. . .-3230/3263 10 000 sec. average value 5000 sec. minimum value TEST VOLTAGE: (Electrode/electrode): DC 2150 V/2 sec. REFERENCE STANDARDS: Free margin Electrode Dielectric Center margin EN 132 400, 1994 EN 60068-1 IEC 60384-14/2, 1993 UL 1283 UL 1414 CSA 22.2 No. 8-M 86 CSA 22.2 No. 1-M 90 MAXIMUM PULSE RISE TIME: (du/dt) in V/µs RATED VOLTAGE AC 300 V PITCH (mm) 15.0 200 22.5 150 27.5 100 37.5 100 DIELECTRIC: Polyester film ELECTRODES: Metal evaporated RATED VOLTAGE: AC 300 V, 50/60 Hz CONSTRUCTION: Metallized film capacitor Internal series connection Between interconnected terminations and case (foil method): AC 2500 V for 2 sec. at 25 °C. Z [Ω] 10 1 PERMISSIBLE DC VOLTAGE: DC 800 V TERMINALS: Radial tinned copper wire COATING: Plastic case, epoxy resin sealed, flame retardant UL 94V-0 10 0 0.47 μF E12 series 0.01 µFX2 - 2.2 µFX2 E12 values on request 10 -2 10 -3 FURTHER TECHNICAL DATA: See page 21 (Document No 26504) 0.01 0.05 0.1 0.5 1.0 2.2 μF 1.5 μF 1 μF 0.68 μF 0.33 μF CAPACITANCE RANGE: 0.15 μF 0.068 μF 0.033 μF 0.015 μF 0.01 μF 10 0.22 μF 40/100/56 -1 0.1 μF CLIMATIC TESTING CLASS ACC. TO EN 60068-1: 0.047 μF 0.022 μF 5.0 10 50 100 f [MHz] Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average). Measurement with lead length 6 mm. Document Number: 26501 Revision: 11-Jun-07 To contact us: RFI@vishay.com www.vishay.com 25 F1772-3200 Vishay Roederstein APPROVALS COUNTRY U.S.A. (for AC 250 V) Canada (for AC 250 V) SPECIFICATION UL 1283 UL 1414 C 22.2 No. 8-M 1986 C 22.2 No. 1-M 1994 EN 132 400; 1999 IEC 60384-14, 2nd edition, 1995 ELECTRICAL VALUES 0.01 - 2.2 µFX 0.01 - 1.0 µFX 0.01 - 2.2 µFX 0.01 - 0.82 µFX 0.01 - 2.2 µFX2 0.01 - 2.2 µFX2 APPROVAL REFERENCE E 76297 E 100682 LR 64546 LR 64546-8 DE 1-8791 40005120 10 AC-Capacitors, Suppression Capacitors Class X2 AC 300 V (MKT) APPROVAL MARK CB TEST-CERTIFICATE (for AC 300 V) Germany This approval mark together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the CB-Agreement): Austria France Netherlands Japan Singapore Belgium Germany Israel Norway Rep. of Korea Denmark Ireland Portugal China Hungary Finland Italy Spain Poland Iceland QUANTITY PACKAGE LEAD LENGTH < = 6-1 mm (pcs)* 750 750 750 600 600 450 325 235 225 200 185 160 170 125 125 110 110 85 90 70 80 60 Sweden Switzerland Great Britain Czech. Republic Slovenia CAPACITANCE TOL. (%) PITCH (mm) BOX NO. DIMENSIONS W x H x L (mm) (+ 0.2/- 0.4 mm) WEIGHT LEAD LENGTH 6-1 mm (g) ORDERING CODE** 0.01 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 0.015 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 0.022 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 0.033 µFX2 ± 20 15.0 49 6.0 x 12.0 x 17.9 2.0 0.047 µFX2 ± 20 15.0 49 6.0 x 12.0 x 17.9 2.1 0.068 µFX2 ± 20 15.0 07 7.3 x 13.3 x 17.8 2.7 0.1 µFX2 ± 20 15.0 08 8.3 x 14.3 x 17.8 4.1 0.15 µFX2 ± 20 22.5 11 7.3 x 15.3 x 26.3 4.3 0.15 µFX2 ± 20 15.0 35 10.3 x 17.3 x 17.8 4.3 0.22 µFX2 ± 20 22.5 12 8.3 x 16.3 x 26.3 6.8 0.22 µFX2 ± 20 15.0 36 13.3 x 22.3 x 17.8 7.1 0.33 µFX2 ± 20 27.5 29 8.8 x 18.3 x 31.3 8.0 0.33 µFX2 ± 20 22.5 13 10.3 x 18.3 x 26.3 6.7 0.47 µFX2 ± 20 27.5 14 11.0 x 20.3 x 31.3 10.0 0.47 µFX2 ± 20 22.5 27 12.3 x 19.8 x 26.3 8.7 0.68 µFX2 ± 20 27.5 15 13.0 x 23.3 x 31.3 14.2 0.68 µFX2 ± 20 22.5 38 15.3 x 26.3 x 26.3 14.3 1.0 µFX2 ± 20 27.5 17 16.3 x 29.3 x 31.3 22.5 1.0 µFX2 ± 20 22.5 20 17.8 x 29.3 x 26.3 18.3 1.5 µFX2 ± 20 37.5 70 15.5 x 28.3 x 41.3 26.1 1.5 µFX2 ± 20 27.5 40 17.8 x 32.8 x 31.3 24.4 2.2 µFX2 ± 20 37.5 20 17.8 x 32.3 x 41.3 33.4 Inbuilt discharging resistor on request (with larger case dimensions). * Further information about packaging quantities with different lead length and/or taped versions. See page 16 (Document No 27608 Packing Quantities). Use Box No. as reference ** These capacitors can be delivered on continuous tape and reel - see page 14/15 (Document Number 27622). The ordering code is: F1772-. . .-3290 at H = 16.5 mm F1772-. . .-3291 at H = 18.5 mm F1772-. . .-3960 at H = 16.5 mm F1772-. . .-3961 at H = 18.5 mm F1772-310-32 . . F1772-315-32 . . F1772-322-32 . . F1772-333-32 . . F1772-347-32 . . F1772-368-32 . . F1772-410-32 . . F1772-415-32 . . F1772-415-326 . F1772-422-32 . . F1772-422-326 . F1772-433-32 . . F1772-433-326 . F1772-447-32 . . F1772-447-326 . F1772-468-32 . . F1772-468-326 . F1772-510-32 . . F1772-510-326 . F1772-515-32 . . F1772-515-326 . F1772-522-32 . . www.vishay.com 26 To contact us: RFI@vishay.com Document Number: 26501 Revision: 11-Jun-07 F1772-3200 AC-Capacitors, Suppression Capacitors Class X2 AC 300 V (MKT) APPLICATION NOTES • For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 300 V (AC). • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. • These capacitors can be used for series impedance application in case safety approvals are requested. • The maximum ambient temperature must not exceed 100 °C. • Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 V (DC) and divided by the applied voltage. Vishay Roederstein Document Number: 26501 Revision: 11-Jun-07 To contact us: RFI@vishay.com www.vishay.com 27 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1