G2SBA60

G2SBA20, G2SBA60 & G2SBA80 Vishay Semiconductors Glass Passivated Single-Phase Bridge Rectifier Major Ratings and Characteristics IF(AV) VRRM IFSM IR VF Tj max. 1.5 A 200 V, 600 V, 800 V 60 A 5 µA 1.0 V 150 °C C ase Type G B L ~ ~ ~ ~ Features • • • • • • UL Recognition file number E54214 Ideal for printed circuit boards High surge current capability Typical IR less than 0.1 µA High case dielectric strength Meets MSL level 1, per J-STD-020C Typical Applications General purpose use in ac-to-dc bridge full wave rectification for Monitor, TV, Printer, SMPS, Adapter, Audio equipment, and Home Appliances applications Mechanical Data Case: GBL Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated (E3 Suffix) leads, solderable per J-STD-002B and MIL-STD-750, Method 2026 Polarity: As marked on body Maximum Ratings Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current at TA = 25 °C Peak forward surge current single sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range Symbol VRRM VRMS VDC IF(AV) IFSM I2 t TJ, TSTG G2SBA20 200 140 200 G2SBA60 600 420 600 1.5 60 15 - 55 to + 150 G2SBA80 800 560 800 Unit V V V A A A2sec °C Document Number 88604 22-Nov-04 www.vishay.com 1 G2SBA20, G2SBA60 & G2SBA80 Vishay Semiconductors Electrical Characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Maximum instantaneous forward voltage drop per leg Maximum DC reverse current at rated DC blocking voltage per leg Test condition at 0.75 A TA = 25 °C TA = 125 °C Symbol VF IR G2SBA20 G2SBA60 1.00 5.0 300 G2SBA80 Unit V µA Thermal Characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Typical thermal resistance per leg Symbol RθJA RθJC G2SBA20 G2SBA60 40 12 G2SBA80 Unit °C/W Notes: (1) Unit mounted on P.C.B. with 0.5 x 0.5" (12 x 12 mm) copper pads and 0.375" (9.5 mm) lead length Ratings and Characteristics Curves (TA = 25 °C unless otherwise noted) 2 100 P.C.B. Mounting, TA 1.5 Instantaneous Forward Current (A) Average Forward Output (IF(AV) ) 10 1 1 0.5 0.1 0 0 25 50 75 100 125 150 0.01 0.6 1 1.4 1.8 2.2 2.6 3 3.4 Temperature (°C) Figure 1. Derating Curve Output Rectified Current Instantaneous Forward Voltage (V) Figure 3. Typical Forward Characteristics Per Leg 100 100 Instantaneous Reverse Current ( A) Peak Forward Surge Current (A) 80 10 TA = 125 °C 60 1 40 0.1 20 1.0 Cycle 0 1 100 TA = 25 °C 0.01 0 20 40 60 80 100 Number of Cycles at 60 Hz Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Leg Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics Per Leg www.vishay.com 2 Document Number 88604 22-Nov-04 G2SBA20, G2SBA60 & G2SBA80 Vishay Semiconductors 100 100 Transient Thermal Impedance ( °C/W) Junction Capacitance (pF) 10 10 1 0.1 1 0.1 1 10 100 0.01 0.01 0.1 1 10 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance Per Leg t, Heating Time (sec.) Figure 6. Typical Transient Thermal Impedance Package outline dimensions in Inches and (Millimeters) Case Type GBL 0.125 (3.17) x 45 degrees Chamfer 0.825 (20.9) 0.815 (20.7) 0.080 (2.03) 0.060 (1.50) 0.421 (10.7) 0.411 (10.4) 0.095 (2.41) 0.080 (2.03) 0.098 (2.5) 0.075 (1.9) 0.050 (1.27) 0.040 (1.02) 0.210 (5.3) 0.190 (4.8) 0.026 (0.66) 0.020 (0.51) 0.098 (2.5) 0.075 (1.9) 0.718 (18.2) 0.682 (17.3) Lead Depth 0.022 (0.56) 0.018 (0.46) 0.040 (1.02) 0.030 (0.76) 0.140 (3.56) 0.128 (3.25) Polarity shown on front side of case, positive lead beveled corner . Document Number 88604 22-Nov-04 www.vishay.com 3