GBPC101

GBPC1005 thru GBPC110 Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES • UL recognition file number E54214 • Ideal for printed circuit boards • Typical IR less than 0.1 µA • High surge current capability • High case dielectric strength 1500 VRMS • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for switching power supply, home appliances, office equipment, industrial automation applications. 3A 50 V to 1000 V 60 A 5 µA 1.0 V 150 °C ~ ~ e4 ~ ~ Case Style GBPC1 PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM IR VF TJ max. MECHANICAL DATA Case: GBPC1 Epoxy meets UL 94V-0 flammability rating Terminals: Silver plated leads, solderable per J-STD-002 and JESD22-B102 E4 suffix for consumer grade Polarity: As marked, positive lead by belevled corner Mounting Torque: 10 cm-kg (8.8 inches-lbs) max. Recommended Torque: 5.7 cm-kg (5 inches-lbs) MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS bridge input voltage Maximum DC blocking voltage Maximum average forward rectified output current at TC = 60 °C TA = 25 °C (2) (1) SYMBOL VRRM VRMS VDC IF(AV) IFSM I2t TJ, TSTG GBPC 1005 50 35 50 GBPC 101 100 70 100 GBPC 102 200 140 200 GBPC 104 400 280 400 3.0 2.0 60 15 - 55 to + 150 GBPC 106 600 420 600 GBPC 108 800 560 800 GBPC 110 1000 700 1000 UNIT V V V A A A 2s °C Peak forward surge current single sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range Notes: (1) Unit mounted on 4.0 x 4.0 x 0.11" thick (10.5 x 10.5 x 0.3 cm) aluminum Plate (2) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length with 0.5 x 0.5" (12 x 12 mm) copper pads Document Number: 88611 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 GBPC1005 thru GBPC110 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage drop per diode Maximum DC reverse current at rated DC blocking voltage per diode Typical junction capacitance per diode TEST CONDITIONS 1.5 A TA = 25 °C TA = 125 °C 4.0 V, 1 MHz SYMBOL VF GBPC 1005 GBPC 101 GBPC 102 GBPC 104 1.0 5.0 500 21 GBPC 106 GBPC 108 GBPC 110 UNIT V IR µA CJ pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw SYMBOL RθJA RθJC GBPC 1005 GBPC 101 GBPC 102 GBPC 104 12 8.0 GBPC 106 GBPC 108 GBPC 110 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N GBPC106-E4/51 UNIT WEIGHT (g) 2.5 PREFERRED PACKAGE CODE 51 BASE QUANTITY 100 DELIVERY MODE Paper box RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 5.0 60 Average Forward Output Current (A) Peak Forward Surge Current (A) 4.0 3.0 Case Temperature, TC Heatsink Mounting 4.0 x 4.0 x 0.11" Thk. (10.5 x 10.5 x 0.3 cm) Al. Plate 60 Hz Resistive or Inductive Load TC = 60 °C Single Sine-Wave 50 40 30 2.0 20 1.0 0 0 Ambient Temperature, TA P.C.B. Mounting 0.375" (9.5 mm) Lead Length 50 100 150 10 1.0 Cycle 0 1 10 100 Ambient Temperature (°C) Number of Cycles at 60 Hz Figure 1. Derating Curve Output Rectified Current Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88611 Revision: 15-Apr-08 GBPC1005 thru GBPC110 Vishay General Semiconductor 100 100 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 Junction Capacitance (pF) 1.0 1.2 1.4 1.6 1 10 0.1 0.01 0.4 0.6 0.8 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 100 10 TJ = 125 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) 10 1 1 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Heating Time (s) Figure 4. Typical Reverse Leakage Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style GBPC1 Hole For #6 Screw 0.158 (4.01) DIA. 0.142 (3.61) 0.630 (16.00) 0.590 (14.98) 0.445 (11.30) 0.405 (10.29) AC 0.630 (16.00) 0.590 (14.98) 0.445 (11.30) 0.405 (10.29) AC 0.128 (3.25) 0.048 (1.22) 0.032 (0.81) DIA. 0.028 (0.71) 0.094 (2.4) x 45° 0.040 (1.02) TYP. 0.750 (19.05) MIN. 0.200 (5.08) 0.160 (4.06) Polarity shown on side of case: Positive lead by beveled corner Document Number: 88611 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1