GBPC25

GBPC12, GBPC15, GBPC25 & GBPC35 Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES GBPC-W GBPC ~ ~ ~ ~ ~ • UL recognition file number E54214 • Universal 3-way terminals: snap-on, wire wrap-around, or P.C.B. mounting e4 • Typical IR less than 0.3 µA • High surge current capability • Low thermal resistance • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for power supply, home appliances, office equipment, industrial automation applications. MECHANICAL DATA Case: GBPC, GBPC-W Epoxy meets UL 94V-0 flammability rating Terminals: Nickel plated on faston lugs or silver plated on wire leads, solderable per J-STD-002 and JESD22-B102. E4 suffix for consumer grade. Suffix letter “W” added to indicate wire leads (e.g. GBPC12005W). Polarity: As marked, positive lead by belevled corner Mounting Torque: 20 inches-lbs. max. ~ PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM IR VF TJ max. 12 A, 15 A, 25 A, 35 A 50 V to 1000 V 200 A, 300 A, 300 A, 400 A 5 µA 1.1 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current (Fig. 1) GBPC12 GBPC15 GBPC25 GBPC35 GBPC12 GBPC15 GBPC25 GBPC35 GBPC12 GBPC15 GBPC25 GBPC35 SYMBOL VRRM VRMS VDC GBPC12, 15, 25, 35 005 50 35 50 01 100 70 100 02 200 140 200 04 400 280 400 12 15 25 35 200 300 300 400 160 375 375 660 2500 - 55 to + 150 06 600 420 600 08 800 560 800 10 1000 700 1000 UNIT V V V IF(AV) A Peak forward surge current single sine-wave superimposed on rated load IFSM A Rating (non-repetitive, for t greater than 1 ms and less than 8.3 ms) for fusing RMS isolation voltage from case to leads I2 t A 2s VISO TJ, TSTG V °C www.vishay.com 1 Operating junction storage temperature range Document Number: 88612 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com GBPC12, GBPC15, GBPC25 & GBPC35 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER GBPC12 GBPC15 GBPC25 GBPC35 TEST SYMBOL CONDITIONS IF = 6.0 A IF = 7.5 A IF = 12.5 A IF = 17.5 A TA = 25 °C TA = 125 °C 4 V, 1 MHz GBPC12, 15, 25, 35 005 01 02 04 06 08 10 UNIT Maximum instantaneous forward drop per diode VF 1.1 V Maximum reverse DC current at rated DC blocking voltage per diode Typical junction capacitance per diode IR CJ 5.0 500 300 µA pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Notes: (1) With heatsink (2) Bolt down on heatsink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #10 screw GBPC12-25 GBPC35 SYMBOL RθJC GBPC12, 15, 25, 35 005 01 02 04 1.9 1.4 06 08 10 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N GBPC1206-E4/51 GBPC1506-E4/51 GBPC2506-E4/51 GBPC3506-E4/51 GBPC1206W-E4/51 GBPC1506W-E4/51 GBPC2506W-E4/51 GBPC3506W-E4/51 UNIT WEIGHT (g) 15.79 15.79 15.79 15.79 13.8 13.8 13.8 13.8 PREFERRED PACKAGE CODE 51 51 51 51 51 51 51 51 BASE QUANTITY 100 100 100 100 100 100 100 100 DELIVERY MODE Paper box Paper box Paper box Paper box Paper box Paper box Paper box Paper box www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88612 Revision: 15-Apr-08 GBPC12, GBPC15, GBPC25 & GBPC35 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 40 35 30 25 20 15 10 5 0 0 25 50 75 100 125 150 175 200 60 Hz Resistive or Inductive Load 6 x 2.2 x 2.2" AL, Finned Plate 1000 Bridges Mounted on 9.5 x 3.5 x 4.6" (22.9 x 8.9 x 11.7 cm) AL, Finned Plate 5 x 6 x 4.9" AL, Finned Plate 5 x 4 x 3" AL, Finned Plate TJ = TJ Max. 0.5 ms Single Sine-Wave Peak Forward Surge Current (A) Average Forward Current (A) GBPC35 100 GBPC12 GBPC15 GBPC25 1.0 Cycle 10 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Output Rectified Current Figure 4. Maximum Non-Repetitive Peak Forward Surge Current Per Diode 40 35 100 Instantaneous Forward Current (A) GBPC35 RthSA = 0.5 °C/W Average Forward Current (A) 60 Hz Resistive or Inductive Load TA = 150 °C TA = 125 °C 10 30 25 20 15 10 5 0 0 GBPC25 RthSA = 0.5 °C/W GBPC15 RthSA = 1.0 °C/W TA = 100 °C TA = 25 °C 1 GBPC12 RthSA = 1.0 °C/W 10 20 30 40 50 60 70 80 90 100 0.1 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 Ambient Temperature (°C) Instantaneous Forward Voltage (V) Figure 2. Maximum Output Rectified Current Figure 5. Typical Instantaneous Forward Characteristics Per Diode Average Power Dissipation of Bridge (W) 80 70 60 50 40 30 20 10 0 0 10 20 30 40 Resistive or Inductive Load TJ = TJ Max. Capacitive Load 1000 Instantaneous Reverse Leakage Current (µA) TA = 150 °C TA = 125 °C TA = 100 °C 10 100 1 TA = 25 °C 0.1 0 10 20 30 40 50 60 70 80 90 100 Average Output Current (A) Percent of Rated Peak Reverse Voltage (%) Figure 3. Maximum Power Dissipation Figure 6. Typical Reverse Leakage Characteristics Per Diode Document Number: 88612 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 GBPC12, GBPC15, GBPC25 & GBPC35 Vishay General Semiconductor 1000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 Transient Thermal Impedance (°C/W) Junction Capacitance (pF) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 100 10 10 1 10 100 1 0.01 0.1 1 10 100 Reverse Voltage (V) t - Heating Time (s) Figure 7. Typical Junction Capacitance Per Diode Figure 8. Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) GBPC-W Hole for #10 Screw 0.220 (5.59) DIA. 0.200 (5.08) 1.135 (28.8) 1.115 (28.3) 0.732 (18.6) 0.692 (17.6) 0.24 (6.0) 0.18 (4.6) Hole for #10 Screw 0.220 (5.59) DIA. 0.200 (5.08) GBPC 1.135 (28.8) 1.115 (28.3) 0.672 (17.1) 0.632 (16.1) AC 1.135 (28.8) 1.115 (28.3) 0.732 (18.6) 0.692 (17.6) 0.672 (17.1) 0.632 (16.1) 1.135 (28.8) 1.115 (28.3) 0.034 (0.86) 0.030 (0.76) 0.732 (18.6) 0.692 (17.6) 0.094 (2.4) DIA. 0.25 (6.35) 0.582 (14.8) 0.542 (13.8) 0.24 (6.0) 0.18 (4.6) 0.042 (1.07) 0.038 (0.97) DIA. 0.470 (11.9) 0.430 (10.9) 0.50 (12.7) 0.44 (11.7) 1.25 (31.8) MIN. 0.034 (0.86) 0.030 (0.76) 0.310 (7.62) 0.290 (7.36) 0.310 (7.62) 0.290 (7.36) 0.840 (21.3) 0.740 (18.8) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88612 Revision: 15-Apr-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1