GBPC6005

VISHAY GBPC6005 thru GBPC610 Vishay Semiconductors Glass Passivated Single-Phase Bridge Rectifier Major Ratings and Characteristics IF(AV) VRRM IFSM IR VF Tj max. 6A 50 V to 1000 V 175 A 5 µA 1.0 V 150 °C Case Style GBPC6 ~ ~ ~ ~ Features • • • • • • UL Recognition file number E54214 Ideal for printed circuit boards Typical IR less than 0.5 µA High surge current capability High case dielectric strength 1500 VRMS Meets MSL level 1, per J-STD-020C Mechanical Data Case: GBPC6 Epoxy meets UL-94V-0 Flammability rating Terminals: Silver plated (E4 Suffix) leads, solderable per J-STD-002B and MIL-STD-750, Method 2026 Polarity: As marked, Positive lead by belevled corner Mounting Torque: 10 cm-kg (8.8 inches-lbs) max. Recommended Torque: 5.7 cm-kg (5 inches-lbs) Typical Applications General purpose use in ac-to-dc bridge full wave rectification for Power Supply, Home Appliances, Office Equipment, Industrial Automation applications Maximum Ratings Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Maximum repetitive peak reverse voltage Maximum RMS bridge input voltage Maximum DC blocking voltage Maximum average forward TC = 50 °C rectified output current at TA = 40 °C (3) (1)(2) Symbols VRRM VRMS VDC IF(AV) IFSM I2 t TJ, TSTG GBPC 6005 50 35 50 GBPC 601 100 70 100 GBPC 602 200 140 200 GBPC 604 400 280 400 6.0 3.0 175 127 - 55 to + 150 GBPC 606 600 420 600 GBPC 608 800 560 800 GBPC 610 1000 700 1000 Unit V V V A A A2sec °C Peak forward surge current single sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range Document Number 88613 10-Dec-04 www.vishay.com 1 GBPC6005 thru GBPC610 Vishay Semiconductors Electrical Characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Maximum instantaneous forward voltage drop per leg Maximum DC reverse current at rated DC blocking voltage per leg Typical junction capacitance per leg Test condition at 3.0 A TA = 25 °C TA = 125 °C at 4.0 V, 1 MHz Symbols VF IR GBPC 6005 GBPC 601 GBPC 602 GBPC 604 1.0 5.0 500 186 90 GBPC 606 GBPC 608 VISHAY GBPC 610 Unit V µA CJ pF Thermal Characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Typical thermal resistance per leg(1) Notes: (1) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw (2) Unit mounted on 5.5 x 6.0 x 0.11" thick (14 x 15 x 0.3 cm) Al. Plate (3) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length with 0.5 x 0.5" (12 x 12 mm) copper pads Symbols RθJA RθJC GBPC 6005 GBPC 601 GBPC 602 GBPC 604 22 7.3 GBPC 606 GBPC 608 GBPC 610 Unit °C/W Ratings and Characteristics Curves (TA = 25 °C unless otherwise noted) 8.0 200 Average Forward Output Current (A) Peak Forward Surge Current (A) 6.0 Case Temperature, TC Heatsink Mounting 5.5 x 6.0 x 0.11" Thk (14 x 15 x 0.3 cm) AL. Plate 60 HZ Resistive or Inductive Load 175 150 125 100 75 TJ = TJ max. Single Half Sine-Wave (JEDEC Method) 4.0 2.0 Ambient Temperature, TA P.C.B. Mounting 0.375" (9.5 mm) Lead Length 0 50 100 150 1.0 Cycle 50 1 10 100 0 Temperature (°C) Number of Cycles at 60 HZ Figure 1. Derating Curve Output Rectified Current Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Leg www.vishay.com 2 Document Number 88613 10-Dec-04 VISHAY GBPC6005 thru GBPC610 Vishay Semiconductors 100 1,000 Instantaneous Forward Current (A) 10 TJ = 25 °C Pulse Width = 300 µs 1% Duty Cycle 1 Junction Capacitance, pF TJ = 25 °C f = 1.0 MHZ Vsig = 50mVp-p 100 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 10 0.1 50 - 400 V 600 - 1000 V 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Leg Figure 5. Typical Junction Capacitance Per Leg 100 TA = 125 °C 100 TJ = 100 °C 10 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) 10 1 1 TJ = 25 °C 0.1 0 20 40 60 80 100 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t, Heating Time (sec.) Figure 4. Typical Reverse Leakage Characteristics Per Leg Figure 6. Typical Transient Thermal Impedance Per Leg Package outline dimensions in inches (millimeters) Case Style GBPC6 0.630 (16.00) 0.590 (14.98) 0.445 (11.30) 0.405 (10.29) HOLE FOR #6 SCREW 0.158 (4.01) 0.142 (3.61) 0.630 (16.00) DIA. 0.590 (14.98) AC 0.128 (3.25) 0.048 (1.22) AC 0.445 (11.30) 0.405 (10.29) 0.094 (2.4) x 45 degrees 0.040 (1.02) TYP. 0.042(1.07) DIA. 0.038(0.96) 0.200 (5.08) 0.160 (4.06) 0.750 (19.05) MIN. Polarity shown on side of case: Positive lead by beveled corner Document Number 88613 10-Dec-04 www.vishay.com 3