GCDA05

VISHAY GCDA05 Vishay Semiconductors Low Capacitance ESD Protection Diode Array for High-Speed Data Interfaces Features • Transient protection for data lines as per IEC 61000-4-2 (ESD) 15 kV (air) 8 kV (contact) IEC 61000-4-5 (Lightning) 12 A (tp = 8/ 20 µs) • Small package for use in portable electronics • Protects two I/O lines • Low capacitance for high-speed data lines • Low leakage current 8 7 6 5 1 2 3 4 17465 Mechanical Data Case: SO-8 molded Plastic body Molding Compound Flammability Rating: UL 94 V-0 Terminals: High temperature soldering guaranteed: 260 °C/10 sec. at terminals Weight: 0.5 g Absolute Maximum Ratings Ratings at 25 °C, ambient temperature unless otherwise specified Parameter Peak pulse power Test condition 8/20 µs waveform Symbol PPPM Value 300 Unit W Thermal Characteristics Ratings at 25 °C, ambient temperature unless otherwise specified Parameter Operation temperature Storage temperature Lead soldering temperature (10 sec) Test condition Symbol TJ Tstg TL Value - 55 to + 125 - 55 to + 150 260 Unit °C °C °C Electrical Characteristics Ratings at 25 °C, ambient temperature unless otherwise specified Parameter Reverse stand-off voltage Reverse breakdown voltage Reverse leakage current Clamping voltage Junction capacitance between I/O pins and GND It = 1 m A VRWM = 5 V IPP = 5 A, 8/20 µs waveform IPP = 1 A, 8/20 µs waveform VR = 0 V, f = 1 MHz Test condition Symbol VRWM VBR IR VC VC Cj 6 20 11 9.8 5 Min Typ. Max 5 Unit V V µA V V pF Document Number 85806 Rev. 3, 18-Jul-03 www.vishay.com 1 GCDA05 Vishay Semiconductors Package Dimensions in Inches (mm) VISHAY 0.197 (5.00) 0.189 (4.80) 8 5 0.157 (3.99) 0.150 (3.81) 0.244 (6.20) 0.228 (5.79) 1 4 0.050 (1.27) 0.020 (0.51) 0.013 (0.33) 0.069 (1.75) 0.053 (1.35) 0.019 (0.48) x 45° 0.009 (0.23) 0.010 (0.25) 0.007 (0.18) 17421 0.009 (0.23) 0.004 (0.10) 0°- 8° 0.050(1.27) 0.016 (0.41) Mounting Pad Layout 0.05 (1.27) 0.04 (1.02) 0.245 (6.22) Min. 0.165 (4.19) 0.155 (3.94) 0.035 (0.889) 0.025 (0.635) 0.050 typ. (1.27) 17420 www.vishay.com 2 Document Number 85806 Rev. 3, 18-Jul-03 VISHAY Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. GCDA05 Vishay Semiconductors 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 85806 Rev. 3, 18-Jul-03 www.vishay.com 3