GI1401

GI1401 thru GI1404 Vishay General Semiconductor Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction TO-220AC • Ultrafast recovery time • Low switching losses, high efficiency • Low leakage current • High forward surge capability • Solder dip 260 °C, 40 s 2 1 • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, dc-to-dc converters, and other power switching application. MECHANICAL DATA Case: TO-220AC Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PIN 1 PIN 2 CASE PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 8.0 A 50 V to 200 V 125 A 35 ns 0.895 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC = 125 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating and storage temperature range SYMBOL VRRM VRMS VDC IF(AV) IFSM TJ, TSTG GI1401 50 35 50 GI1402 100 70 100 8.0 125 - 65 to + 150 GI1403 150 105 150 GI1404 200 140 200 UNIT V V V A A °C Document Number: 88623 Revision: 07-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 GI1401 thru GI1404 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 4 A IF = 8 A IF = 4 A IF = 8 A TJ = 25 °C TJ = 25 °C TJ = 100 °C TJ = 100 °C TC = 25 °C TC = 100 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz SYMBOL GI1401 GI1402 GI1403 GI1404 UNIT 0.900 0.975 0.800 0.895 5.0 150 35 85 Maximum instantaneous forward voltage VF V Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time Typical junction capacitance IR trr CJ µA ns pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1, 2) Notes: (1) Thermal resistance from junction to ambient in free air, no heatsink (2) Thermal resistance from junction to case and ambient mounted on heatsink SYMBOL RθJA RθJC GI1401 GI1402 15 2.2 GI1403 GI1404 UNIT °C/W ORDERING INFORMATION (Example) PACKAGE TO-220AC TO-220AC Note: (1) Automotive grade AEC Q101 qualified PREFERRED P/N GI1401-E3/45 GI1401HE3/45 (1) UNIT WEIGHT (g) 1.80 1.80 PACKAGE CODE 45 45 BASE QUANTITY 50/tube 50/tube DELIVERY MODE Tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 12 150 Average Forward Rectified Current (A) Peak Forward Surge Current (A) Resistive or Inductive Load 10 Infinite Heatsink Mounting, TC 8 125 100 75 50 25 0 TC = 125 °C 8.3 ms Single Half Sine-Wave 6 Free Air Rating, TA P.C.B. Mounting 4 2 0 0 25 50 75 100 125 150 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88623 Revision: 07-Nov-07 GI1401 thru GI1404 Vishay General Semiconductor 100 1000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Forward Current (A) 10 Pulse Width = 300 µs 1 % Duty Cycle 1 Junction Capacitance (pF) 1.2 TJ = 125 °C TJ = 25 °C 100 0.1 0.01 0.4 10 0.6 0.8 1.0 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 Instantaneous Reverse Leakage Current (µA) 10 TJ = 125 °C TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) PIN 1 PIN 2 CASE 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.603 (15.32) 0.573 (14.55) PIN 2 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) Document Number: 88623 Revision: 07-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1