GL34A thru GL34J
Vishay General Semiconductor
Surface Mount Glass Passivated Junction Rectifier
FEATURES
• Superectifier structure for high reliability condition • Ideal for automated placement • Low forward voltage drop • Low leakage current • Meets environmental standard MIL-S-19500 • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
SUPERECTIFIER®
DO-213AA (GL34)
• AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication.
PRIMARY CHARACTERISTICS
IF(AV) VRRM IFSM VF IR TJ max. 0.5 A 50 V to 600 V 10 A 1.2 V, 1.3 V 5.0 μA 175 °C
MECHANICAL DATA
Case: DO-213AA, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER STANDARD RECOVERY DEVICE: 1ST BAND IS WHITE Polarity color bands (2nd band) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL = 75 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Max. full load reverse current, full cycle average at TA = 55 °C Operating junction and storage temperature range VRRM VRMS VDC IF(AV) IFSM IR(AV) TJ, TSTG SYMBOL GL34A Gray 50 35 50 GL34B Red 100 70 100 GL34D Orange 200 140 200 0.5 10 30 - 65 to + 175 GL34G Yellow 400 280 400 GL34J Green 600 420 600 V V V A A μA °C UNIT
Document Number: 88634 Revision: 15-Mar-11
For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
GL34A thru GL34J
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time Typical junction capacitance TEST CONDITIONS 0.5 A TA = 25 °C TA = 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz SYMBOL VF IR trr CJ GL34A GL34B 1.2 5.0 μA 50 1.5 4.0 μs pF GL34D GL34G GL34J 1.3 UNIT V
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER Maximum thermal resistance SYMBOL RJA RJT
(1) (2)
GL34A
GL34B
GL34D 150
GL34G
GL34J
UNIT °C/W
70
Notes (1) Thermal resistance from junction to ambient, 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
ORDERING INFORMATION (Example)
PREFERRED P/N GL34G-E3/98 GL34G-E3/83 GL34GHE3/98 GL34GHE3/83
(1) (1) (1)
UNIT WEIGHT (g) 0.036 0.036 0.036 0.036
PREFERRED PACKAGE CODE 98 83 98 83
BASE QUANTITY 2500 9000 2500 9000
DELIVERY MODE 7" diameter plastic tape and reel 13" diameter plastic tape and reel 7" diameter plastic tape and reel 13" diameter plastic tape and reel
Note AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
0.5
10
Average Forward Rectified Current (A)
Peak Forward Surge Current (A)
0.4
60 Hz Resistive or Inductive Load
TJ = TJ Max. 8.3 ms Single Half Sine-Wave 8
0.3
6
0.2
4
0.1 0.375" (9.5 mm) Lead Length 0 25 50 75 100 125 150 175
2
0 1 10 100
Terminal Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
For technical questions within your region, please contact one of the following: Document Number: 88634 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 15-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com 2
GL34A thru GL34J
Vishay General Semiconductor
10
100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p
Instantaneous Forward Current (A)
1
Junction Capacitance (pF)
10
0.1
TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle
0.01 0.4
1 0.6 0.8 1.0 1.2 1.4 1.6 1 10 100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
10
Instantaneous Reverse Current (µA)
1
TJ = 100 °C
0.1
TJ = 25 °C 0.01 0 20 40 60 80 100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Characteristics
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-213AA (GL34)
Solderable Ends
1st BAND 2nd BAND 0.066 (1.676) 0.060 (1.524)
Mounting Pad Layout
0.079 (2.0) MAX.
D2
0.079 (2.0) MIN.
D1 =
0.049 (1.25) MIN. 0.022 (0.559) 0.016 (0.406) D2 = D1 0.145 (3.683) 0.131 (3.327)
+0 - 0.008 (0.20)
0.177 (4.5) REF.
1st band denotes type and polarity 2nd band denotes voltage type
Document Number: 88634 Revision: 15-Mar-11
For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 11-Mar-11
www.vishay.com 1
