GLL4744

GLL4735 to GLL4763A www.vishay.com Vishay Semiconductors Zener Diodes FEATURES • Plastic package has underwriters laboratory flammability classification UL 94 V-0 • For surface mounted applications • Glass passivated chip junction • Low Zener impedance • Low regulation factor • High temperature soldering guaranteed: 250 °C/10 s at terminals • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC UNIT V mA PRIMARY CHARACTERISTICS PARAMETER VZ range nom. Test current IZT VZ specification Int. construction VALUE 6.2 to 91 2.8 to 41 Pulse current Single ORDERING INFORMATION DEVICE NAME GLL4735 to GLL4763A GLL4735 to GLL4763A ORDERING CODE GLL4735 to GLL4763A-series-97 GLL4735 to GLL4763A-series-96 TAPED UNITS PER REEL 5000 (12 mm tape on 13" reel) 1500 (12 mm tape on 7" reel) MINIMUM ORDER QUANTITY 5000/box 1500/box PACKAGE PACKAGE NAME MELF DO-213AB (plastic) WEIGHT 116 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 MSL level 1 (according J-STD-020) SOLDERING CONDITIONS 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation Zener current Junction to ambient air Junction temperature Storage temperature range TEST CONDITION Maximum steady state power dissipation is 1 W at TT = 75 °C see table “Characteristics” RthJA Tj Tstg 170 150 - 65 to + 150 °C/W °C °C SYMBOL Ptot VALUE 1000 UNIT mW Rev. 1.7, 06-Dec-11 Document Number: 85781 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GLL4735 to GLL4763A www.vishay.com Vishay Semiconductors DC REVERSE LEAKAGE CURRENT I R at V R μA MAX. 41 37 34 31 28 25 23 21 19 17 15.5 14 12.5 11.5 10.5 9.5 8.5 7.5 7 6.5 6 5.5 5 4.5 4 3.7 3.3 3 2.8 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 50 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 4 5 6 7 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56 62.2 69.2 V MAX. 2 3.5 4 4.5 5 7 8 9 10 14 16 20 22 23 25 35 40 45 50 60 70 80 95 110 125 150 175 200 250 FORWARD VOLTAGE at 200 mA VF V MAX. 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE (1) PART NUMBER VZ at IZT1 V NOM. GLL4735 GLL4736 GLL4737 GLL4738 GLL4739 GLL4740 GLL4741 GLL4742 GLL4743 GLL4744 GLL4745 GLL4746 GLL4747 GLL4748 GLL4749 GLL4750 GLL4751 GLL4752 GLL4753 GLL4754 GLL4755 GLL4756 GLL4757 GLL4758 GLL4759 GLL4760 GLL4761 GLL4762 GLL4763 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 TEST CURRENT IZT1 mA IZT2 DYNAMIC RESISTANCE f = 1 kHz ZZ at IZT1  MAX. 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 3000 3000 ZZK at IZT2 ZENER CURRENT (2) IZM mApk MAX. 730 660 605 550 500 454 414 380 344 305 285 250 225 205 190 170 150 135 125 115 110 95 90 80 70 65 60 55 50 Notes (1) Standard voltage tolerance is ± 10 %, suffix A = ± 5 % (2) Surge current is a non-repetitive, 8.3 ms pulse width square wave or equivalent sine-wave superimposed on I ZT per JEDEC method Rev. 1.7, 06-Dec-11 Document Number: 85781 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GLL4735 to GLL4763A www.vishay.com BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.0 1000 Vishay Semiconductors PM(AV) -- Average Power Dissipation (W) 0.75 ZZ -- Dynamic Zener Impedance (Ω) 60Hz Resistive or Inductive Load TJ = 25° C 100 VZ = 91V VZ = 56V 0.5 10 VZ = 30V 0.25 P.C.B. Mounted on 0.31 x 0.31 x 0.08 " (8 x 8 x 2 mm) Copper areas pads 0 25 50 75 100 125 150 175 VZ = 6.2V 1 0.5 1 10 100 500 18210 Terminals Temperature ( °C) 18213 IZT -- Zener Test Current (mA) Fig. 1 - Maximum Continuous Power Dissipation Fig. 4 - Typical Zener Impedance 10 10 1 Instantaneous Reverse Current (μA) Instantaneous Forward Current (A) 1 TJ = 100° C 0.1 Pulse Width = 300 s 1% Duty Cycle TJ = 25° C 0.1 TJ = 25°C 0.01 0 20 40 60 80 100 0.01 0.4 0.6 0.8 1 1.2 1.4 1.6 18214 18211 Instantaneous Forward Voltage (V) Percent of Rated Zener Voltage (%) Fig. 2 - Typical Instantaneous Forward Characteristics for GLL4763 Fig. 5 - Typical Reverse Characteristics VZ -- Temperature Coefficient (mV/° C) 110 90 70 50 30 10 0 18212 Tested at Rated IZT 0 10 20 30 40 50 60 70 80 90 100 VZ - Zener Voltage (V) Fig. 3 - Typical Temperature Coefficients Rev. 1.7, 06-Dec-11 Document Number: 85781 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GLL4735 to GLL4763A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MELF DO-213AB (plastic) 1st band D1 = 2.67 (0.105) 2.41 (0.095) D2 = D1 + 0 - 0.2 (0.008) 0.56 (0.022) 0.46 (0.018) 5.2 (0.205) 4.7 (0.185) 1st band denotes type and positive end (cathode) Foot print recommendation: 1.25 (0.049) min. 4 (0.157) max. Document-No.: S8-V-3453.03-001 (4) Created-Date: 13.May.2009 18268 6.5 (0.256) ref. Rev. 1.7, 06-Dec-11 Document Number: 85781 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 3 (0.118) min. Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000