GP08G

GP08A thru GP08J Vishay General Semiconductor Glass Passivated Junction Rectifier FEATURES • Superectifier application structure for high reliability SUPERECTIFIER® • Cavity-free glass-passivated junction • Low forward voltage drop • Low leakage current • High forward surge capability • Meets environmental standard MIL-S-19500 • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC DO-204AL (DO-41) TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM IR VF TJ max. 0.8 A 50 V to 600 V 25 A 5.0 μA 1.3 V 175 °C For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes application MECHANICAL DATA Case: DO-204AL, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 55 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Maximum full load reverse current full cycle average 0.375" (9.5 mm) lead length at TA = 55 °C Operating junction and storage temperature range SYMBOL VRRM VRMS VDC IF(AV) IFSM IR(AV) TJ, TSTG GP08A 50 35 50 GP08B 100 70 100 GP08D 200 140 200 0.8 25 30 - 65 to + 175 GP08G 400 280 400 GP08J 600 420 600 UNIT V V V A A μA °C Document Number: 88636 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GP08A thru GP08J Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Typical reverse recovery time Typical junction capacitance TEST CONDITIONS 0.8 A TA = 25 °C TA = 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz SYMBOL VF IR trr CJ GP08A GP08B GP08D 1.3 5.0 μA 50 2.0 8.0 μs pF GP08G GP08J UNIT V THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL RJA (1) GP08A GP08B GP08D 55 GP08G GP08J UNIT °C/W Note (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted ORDERING INFORMATION (Example) PREFERRED P/N GP08J-E3/54 GP08J-E3/73 GP08JHE3/54 (1) GP08JHE3/73 (1) (1) UNIT WEIGHT (g) 0.335 0.335 0.335 0.335 PREFERRED PACKAGE CODE 54 73 54 73 BASE QUANTITY 5500 3000 5500 3000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging 13" diameter paper tape and reel Ammo pack packaging Note AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.0 25 Peak Forward Surge Current (A) Average Forward Current (A) TJ = TJ Max. 8.3 ms Single Half Sine-Wave 20 0.8 0.6 15 0.4 60 Hz Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 10 0.2 5.0 0 20 40 60 80 100 120 140 160 180 0 1 10 100 Ambient Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-repetitive Peak Forward Surge Current For technical questions within your region, please contact one of the following: Document Number: 88636 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 15-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com 2 GP08A thru GP08J Vishay General Semiconductor 100 100 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle Instantaneous Forward Current (A) 10 1 Junction Capacitance (pF) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 10 TJ = 100 °C 100 1 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (μA) 10 0.1 TJ = 25 °C 1 P.C.B. Mounted on 0.20" x 0.27" (5 mm x 7 mm) Copper Pad Areas 0.1 0.01 0.1 1 10 100 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Note 0.026 (0.66) • Lead diameter is for suffix “E” part numbers 0.023 (0.58) Document Number: 88636 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1