GSIB2520_08

GSIB2520 thru GSIB2580 Vishay General Semiconductor Single-Phase Single In-Line Bridge Rectifiers FEATURES • UL recognition file number E54214 • Thin single in-line package • Glass passivated chip junction • High surge current capability • High case dielectric strength of 2500 VRMS • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for switching power supply, home appliances, office equipment, industrial automation applications. 25 A 200 V to 800 V 350 A 10 µA 1.0 V 150 °C ~ ~ ~ ~ Case Style GSIB-5S PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM IR VF TJ max. MECHANICAL DATA Case: GSIB-5S Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked on body Mounting Torque: 10 cm-kg (8.8 inches-lbs) max. Recommended Torque: 5.7 cm-kg (5 inches-lbs) MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current at TC = 98 °C TA = 25 °C SYMBOL VRRM VRMS VDC IF(AV) IFSM I2 t TJ, TSTG GSIB2520 200 140 200 GSIB2540 400 280 400 25 3.5 (2) 350 500 - 55 to + 150 (1) GSIB2560 600 420 600 GSIB2580 800 560 800 UNIT V V V A A A2 s °C Peak forward surge current single sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range Notes: (1) Unit case mounted on aluminum plate heatsink (2) Units mounted on P.C.B. without heatsink Document Number: 88646 Revision: 31-Jan-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 GSIB2520 thru GSIB2580 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage drop per diode Maximum DC reverse current at rated DC blocking voltage per diode TEST CONDITIONS SYMBOL 12.5 A TA = 25 °C TA = 125 °C VF IR GSIB2520 GSIB2540 1.00 10 350 GSIB2560 GSIB2580 UNIT V µA THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance Notes: (1) Unit case mounted on aluminum plate heatsink (2) Units mounted on P.C.B. without heatsink (3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw SYMBOL RθJA RθJC GSIB2520 GSIB2540 GSIB2560 GSIB2580 UNIT °C/W 22 (2) 1.0 (1) ORDERING INFORMATION (Example) PREFERRED P/N GSIB2560-E3/45 UNIT WEIGHT (g) 7.0 PREFERRED PACKAGE CODE 45 BASE QUANTITY 20 DELIVERY MODE Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 400 Average Forward Output Current (A) Peak Forward Surge Current (A) Heatsink Mounting, TC 25 350 300 200 150 100 50 0 20 15 10 5 P.C.B. Mounting, TA 1.0 Cycle 0 0 25 50 75 100 125 150 1 10 100 Temperature (°C) Number of Cycles at 60 Hz Figure 1. Derating Curve Output Rectified Current Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88646 Revision: 31-Jan-08 GSIB2520 thru GSIB2580 Vishay General Semiconductor 100 1000 Instantaneous Forward Current (A) 10 Junction Capacitance (pF) 100 1 10 0.1 0.01 0.6 1 0.8 1.0 1.2 1.4 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 1000 TA = 125 °C 100 10 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) 10 1 1 TA = 25 °C 0.1 0 20 40 60 80 100 0.1 0.01 0.1 1 10 Percent of Rated Peak Reverse Voltage (%) t - Heating Time (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in millimeters Case Style GSIB-5S 4.6 ± 0.2 3.6 ± 0.2 3.5 ± 0.2 3.2 ± 0.2 2.7 ± 0.2 30 ± 0.3 20 ± 0.3 + 2.5 ± 0.2 2.2 ± 0.2 1 ± 0.1 10 ± 0.2 17.5 ± 0.5 4 ± 0.2 7.5 ± 0.2 7.5 ± 0.2 0.7 ± 0.1 11 ± 0.2 5 Document Number: 88646 Revision: 31-Jan-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1