ISC1210

ISC-1210 Vishay Dale Surface Mount, Molded, Shielded Inductor FEATURES • Molded construction provides superior strength and moisture resistance. • Tape and reel packaging for automatic handling, 2000/ reel, EIA 481. • Compatible with vapor phase, infrared and wave soldering methods. • Shielded construction minimizes coupling to other components. STANDARD ELECTRICAL SPECIFICATIONS IND. (µH) 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 TEST SELFRATED FREQ. RESONANT DCR DC Q L & Q FREQ. MIN. MAX. CURRENT TOL. MIN. (MHz) (MHz) (Ohms) (mA) ± 20% 50 50 1000 0.10 810 ± 20% 50 50 1000 0.11 750 ± 20% 50 50 1000 0.12 720 ± 20% 50 50 1000 0.13 690 ± 20% 45 50 1000 0.15 640 ± 20% 45 50 1000 0.17 610 ± 20% 45 50 1000 0.18 585 ± 20% 40 50 1000 0.24 530 ± 20% 40 50 1000 0.26 495 ± 20% 40 50 1000 0.28 485 ± 20% 40 50 1000 0.35 475 ± 20% 38 50 900 0.45 460 ± 20% 36 50 700 0.50 450 ± 20% 40 25.2 500 0.20 630 ± 20% 40 25.2 470 0.20 600 ± 20% 40 25.2 400 0.24 580 ± 20% 40 25.2 330 0.30 565 ± 20% 40 25.2 310 0.33 500 ± 20% 40 25.2 280 0.36 475 ± 20% 40 25.2 230 0.40 465 ± 20% 40 25.2 220 0.44 460 ± 20% 40 25.2 200 0.46 455 ± 20% 40 25.2 180 0.48 450 ± 20% 40 25.2 160 0.50 450 ± 10% 30 7.96 120 0.60 400 ± 10% 30 7.96 110 0.65 390 ± 10% 30 7.96 90.0 0.75 370 ± 10% 30 7.96 85.0 0.85 350 ± 10% 30 7.96 65.0 0.90 320 ± 10% 30 7.96 60.0 1.00 290 ± 10% 30 7.96 60.0 1.10 270 ± 10% 30 7.96 58.0 1.20 250 ± 10% 30 7.96 52.0 1.25 220 ± 10% 30 7.96 50.0 1.40 210 ± 10% 30 7.96 40.0 1.60 205 ± 10% 30 7.96 35.0 1.65 195 ± 10% 30 2.52 30.0 2.00 185 ± 10% 30 2.52 24.0 2.30 175 ± 10% 30 2.52 20.0 2.50 165 ± 10% 30 2.52 17.0 2.70 155 ± 10% 30 2.52 16.0 3.10 150 ± 10% 30 2.52 14.5 3.30 125 ± 10% 30 2.52 14.5 5.10 115 ± 10% 30 2.52 14.0 5.90 105 ± 10% 30 2.52 13.0 8.00 100 ± 10% 30 2.52 11.5 10.0 95 ± 10% 30 2.52 11.0 10.0 90 ± 10% 30 2.52 11.0 11.0 85 ± 10% 30 0.796 6.0 12.0 80 Inductance Range: .01µH to 100µH. Inductance Tolerance: ± 20% for 0.01µH to 0.82µH. ± 10% for 1.0µH to 100µH standard. 2%, 3% and 5% (also 1% on some values) tolerances available. Temperature Range: - 55°C to + 125°C. Coilform Material: Non-magnetic for 0.01µH to 0.10µH. Powdered Iron for 0.12µH to 100µH. ELECTRICAL SPECIFICATIONS TEST EQUIPMENT • H/P 4342A Q meter with Vishay Dale test fixture or equivalent. • H/P 4191A RF Impedance Analyzer (for SRF measurements). • Wheatstone Bridge. DIMENSIONS in inches [millimeters] 0.087 ± 0.008 [2.21 ± 0.203] 0.126 ± 0.008 [3.20 ± 0.203] 0.006 [0.152] Ref. Typ. 0.030 [0.762] Typ. 0.040 [1.02] 0.098 ± 0.008 [2.49 ± 0.203] 0.118 [3.0] 0.028 ± 0.004 [0.711 ± 0.102] Typ. 0.073 [1.85] Ref. 0.138 [3.5] 0.118 Guidelines for 0.020* [3.0] [0.508] Parallel Component Printed Circuit 0.039 0.039 Mounting Pads on [1.0] [1.0] ISC-1210 0.070 [1.8] Chip Inductors *Recommended minimum spacing between components. PART MARKING — Dale — Inductance value — Date code DESCRIPTION ISC-1210 MODEL 10µH INDUCTANCE VALUE ± 10% INDUCTANCE TOLERANCE SAP PART NUMBERING GUIDELINES (INTERNAL) I S C 1 2 SIZE 1 0 S Y 1 0 0 K TOL. PRODUCT FAMILY See the end of this data book for conversion tables PACKAGE CODE INDUCTANCE VALUE www.vishay.com 58 For technical questions, contact Magnetics@vishay.com Document Number 34060 Revision 28-Aug-02