KBPC6

KBPC1, KBPC6 Series Vishay High Power Products Single Phase Rectifier Bridge, 3 A, 6 A FEATURES • Suitable for printed circuit board or chassis mounting • Compact construction • High surge current capability • Compliant to RoHS directive 2002/95/EC D-72 DESCRIPTION The KBPC series of single phase rectifier bridge consists of four silicon junctions connected as a full bridge. These devices are intended for general use in industrial and consumer equipment. PRODUCT SUMMARY IO(AV) VRRM 3.0 A, 6.0 A 50 V to 1000 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IO IFSM I2 t VRRM TJ 50 Hz 60 Hz 50 Hz 60 Hz Range CHARACTERISTICS KBPC1 3 50 55 12.5 11.4 50 to 1000 - 40 to 150 KBPC6 6 125 137 78 71 UNITS A A A2s V °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS PART NUMBER VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V KBPC6005 KBPC602 KBPC604 KBPC606 KBPC608 KBPC610 50 200 400 600 800 1000 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 50 200 400 600 800 1000 VRMS, MAXIMUM RECOMMENDED RMS SUPPLY VOLTAGE V 20 80 125 250 380 500 KBPC1005 KBPC102 KBPC104 KBPC106 KBPC108 KBPC110 Document Number: 93585 Revision: 23-Dec-08 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 KBPC1, KBPC6 Series Vishay High Power Products Single Phase Rectifier Bridge, 3 A, 6 A FORWARD CONDUCTION PARAMETER Maximum DC output current Maximum peak one cycle, non-repetitive surge current SYMBOL IO TEST CONDITIONS TC = 50 °C, resistive or inductive load TC = 50 °C, capacitive load t = 10 ms, 20 ms IFSM t = 8.3 ms, 16.7 ms t = 10 ms Maximum I2t capability for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t capability for fusing Maximum peak forward voltage per diode Typical peak reverse leakage per diode Operating frequency range Maximum repetitive peak reverse voltage range I2√t VFM IRM f VRRM t = 0.1 ms to 10 ms, no voltage reapplied IFM = 0.5 x IO, TJ = 25 °C TJ = 25 °C, 100 % VRRM TJ = 150 °C, 100 % VRRM Initial TJ = TJ maximum 100 % VRRM reapplied Following any rated load condition and with rated VRRM reapplied KBPC1 3.0 2.4 50 55 12.5 11.4 17.7 16.1 177 1.1 10 1.0 KBPC6 6.0 4.7 125 137 78 71 110 1000 1105 1.2 10 1.0 A2√s V mA Hz V A2 s A UNITS 40 to 1000 50 to 1000 THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Operating and storage temperature range Thermal resistance, junction to case Approximate weight SYMBOL TJ, TStg RthJC 5 0.18 KBPC1 - 40 to 150 6 0.21 KBPC6 UNITS °C K/W g oz. 4.0 KBPC1... 8 KBPC6... Average Output Current (A) 3.0 Resistive, inductive load 2.5 2.0 Capacitive load 1.5 1.0 0.5 0.0 0 20 40 60 80 100 120 140 160 Average Output Current (A) 3.5 7 6 Resistive, inductive load 5 4 Capacitive load 3 2 1 0 0 20 40 60 80 100 120 140 160 93585_01 Maximum Allowable Case Temperature (°C) Fig. 1 - Case Temperature Ratings 93585_02 Maximum Allowable Case Temperature (°C) Fig. 2 - Case Temperature Ratings www.vishay.com 2 For technical questions, contact: indmodules@vishay.com Document Number: 93585 Revision: 23-Dec-08 KBPC1, KBPC6 Series Single Phase Rectifier Bridge, 3 A, 6 A Maximum Peak Output Current (A) Maximum Peak Output Current (A) 60 KBPC1... 50 From any rated load condition 40 30 20 10 0 10-2 Vishay High Power Products 10-1 1 10 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 10-2 KBPC6... From any rated load condition 10-1 1 10 93585_03 Pulse Train Duration (s) Fig. 3 - Non-Repetitive Surge Ratings 93585_04 Pulse Train Duration (s) Fig. 4 - Non-Repetitive Surge Ratings CIRCUIT CONFIGURATION + IO(av) ~ ~ LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95250 Document Number: 93585 Revision: 23-Dec-08 For technical questions, contact: indmodules@vishay.com www.vishay.com 3 Outline Dimensions Vishay Semiconductors D-72 DIMENSIONS in millimeters (inches) 15.75 (0.620) 14.75 (0.580) Ø 3.80 (Ø 0.150) 5.33 (0.210) 4.33 (0.170) + 15.75 (0.620) 14.75 (0.580) ~ 10.8 (0.425) 10.0 (0.394) 25.4 (1.000) MIN. ~ 10.8 (0.425) 10.0 (0.394) Ø 1.10 (Ø 0.043) Ø 0.90 (Ø 0.035) Document Number: 95250 Revision: 23-Nov-07 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000