KBPC8005

KBPC8 Series Vishay High Power Products Single Phase Rectifier Bridge, 8 A FEATURES • Suitable for printed circuit board or chasis mounting • Compact construction • High surge current capability • Fully characterised data D-72 RoHS COMPLIANT • Wide temperature range • RoHS compliant PRODUCT SUMMARY IO(av) VRRM 8.0 A 50 to 1000 V DESCRIPTION The KBPC series of single phase rectifier bridge consists of four silicon junctions connected as a full bridge. These device are intended for general use in industrial and consumer equipment. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IO IFSM I2 t VRRM TJ CHARACTERISTICS TC = 50 °C, resistive load TC = 50 °C, capacitive load 50 Hz 60 Hz 50 Hz 60 Hz Range VALUES 8 6.4 125 137 110 100 50 to 1000 - 55 to 150 UNITS A A A2 s V °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS PART NUMBER KBPC8005 KBPC801 KBPC802 KBPC804 KBPC806 KBPC808 KBPC810 VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V 50 100 200 400 600 800 1000 VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 80 150 300 500 700 900 1100 Document Number: 93586 Revision: 29-Sep-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 KBPC8 Series Vishay High Power Products Single Phase Rectifier Bridge, 8 A FORWARD CONDUCTION PARAMETER Maximum DC output current Maximum peak one cycle, non-repetitive surge current SYMBOL IO TEST CONDITIONS TC = 50 °C, resistive or inductive load TC = 50 °C, capacitive load t = 10 ms, 20 ms IFSM t = 8.3 ms, 16.7 ms t = 10 ms Maximum I2t capability for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2√t capability for fusing Maximum peak forward voltage per diode Typical peak reverse leakage per diode Operating frequency range Maximum repetitive peak reverse voltage range I2√t VFM IRM f VRRM t = 0.1 to 10 ms, no voltage reapplied IFM = 3.0 A, TJ = 25 °C TJ = 25 °C, 100 % VRRM TJ = 150 °C, 100 % VRRM Initial TJ = TJ maximum 100 % VRRM reapplied Following any rated load condition and with rated VRRM reapllied VALUES 8.0 6.4 125 137 78 71 110 1000 1105 1.0 10 100 400 to 1000 50 to 1000 A2√s V mA Hz V A2 s A UNITS THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Operating and storage temperature range Thermal resistance, junction to case Approximate weight SYMBOL TJ, TStg RthJC VALUES - 55 to 150 6 6 0.21 UNITS °C K/W g oz. Maximum Peak Surge Current (A) 10 Average Output Current (A) 9 8 7 6 5 4 3 2 1 0 0 20 40 60 80 100 Capacitive load KBPC8... Resistive load 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0.01 0.1 1.0 KBPC8 50 Hz 120 140 160 10 Maximum Allowable Ambient Temperature (°C) Fig. 1 - Current Ratings Pulse Train Duration (s) Fig. 2 - Non-Repetitive Surge Ratings LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com 2 http://www.vishay.com/doc?95250 For technical questions, contact: ind-modules@vishay.com Document Number: 93586 Revision: 29-Sep-08 Outline Dimensions Vishay Semiconductors D-72 DIMENSIONS in millimeters (inches) 15.75 (0.620) 14.75 (0.580) Ø 3.80 (Ø 0.150) 5.33 (0.210) 4.33 (0.170) + 15.75 (0.620) 14.75 (0.580) ~ 10.8 (0.425) 10.0 (0.394) 25.4 (1.000) MIN. ~ 10.8 (0.425) 10.0 (0.394) Ø 1.10 (Ø 0.043) Ø 0.90 (Ø 0.035) Document Number: 95250 Revision: 23-Nov-07 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000