LCD-160G160A_08

LCD-160G160A Vishay 160 x 160 Dots Graphic LCD FEATURES • No Built-in controller • + 5V power supply • 1/160 duty cycle • 4-Bit parallel or 1-Bit serial interface mode MECHANICAL DATA ITEM Module Dimension Viewing Area Dot Size Dot Pitch STANDARD VALUE 89.2 x 85.0 62.0 x 62.0 0.34 x 0.34 0.38 x 0.38 UNIT mm mm mm mm ABSOLUTE MAXIMUM RATING ITEM SYMBOL STANDARD VALUE MIN. Power Supply Input Voltage VDD-VSS VI 4.75 - 0.3 TYP. 5.0 – MAX. 5.52 VDD V V UNIT NOTE: VSS = 0 Volt, VDD = 5.0 Volt ELECTRICAL SPECIFICATIONS ITEM SYMBOL CONDITION MIN. Input Voltage VDD VIO Supply Current Recommended LC Driving Voltage for Normal Temp. Version Module LED Forward Voltage LED Forward Current EL VF IF IEL VDD-V0 IDD L level H level VDD = 5V - 20°C 25°C 60°C 25°C 25°C Vel = 110VAC; 400Hz 0.7VDD – – 16.5 15.5 14.5 – – – STANDARD VALUE TYP. – – 1.5 18.0 17.0 16.0 4.2 500 – MAX. VDD 0.3VDD 3.0 19.5 18.5 17.5 4.6 1000 5.0 V mm mA V V V mA UNIT Document Number: 37243 Revision 01-Oct-02 For Technical Questions, Contact: Displays@Vishay.com www.vishay.com 113 LCD-160G160A Vishay PIN NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 160 x 160 Dots Graphic LCD SYMBOL Vss (GND) M FLM CL1 CL2 DB3 DB2 DB1 DB0 Vee Vdd Vo DISPOFF A K FUNCTION Ground Control signal for A.C.driving The FLM Signal Indicates the Beginning of each Display Cycle The CL1 Latches the Serial Data in Shift Register Clock Signal for Shifting the Serial Data Data Bus Line Data Bus Line Data Bus Line Data Bus Line Power Supply for LCD Driving Power Supply (+ 5V) Contrast Adjustment Controls Display off, 0: off, 1: on Power Supply for B/L Power Supply for B/L DIMENSIONS in millimeters 8.9 14.9 15.52 30.63 1 15 2.5 2.5 6.1 13.6 14.22 89.2 ± 0.5 73.0 62.0 (VA) 60.76 (AA) 35.56 (P2.54*14) 14.5 MAX 9.9 9.3 MAX 4.7 42.4 35.4 0.38 0.34 85.0 ± 0.5 72.0 62.0 (VA) 60.76 (AA) 0.38 1.6 1.6 EL or NO B/L LED B/L 7.0 21.0 80.0 4 - Ø 1.0 PTH 2.5 84.2 4 - Ø 2.5 PTH 4 - Ø 5.0 PAD www.vishay.com 114 For Technical Questions, Contact: Displays@Vishay.com Document Number: 37243 Revision 01-Oct-02 0.34 DOT SIZE Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1