LCD-320D240A

LCD-320D240A Vishay 320 x 240 Dots Color LCD FEATURES • Type: Color • Display format: 320 x 240 dots (RGB) • Built-in controller: None • Duty cycle: 1/240 • Built-in white backlight (CCFL) • Color STN LCD type • 8-bit data bus • + 3 V to + 5 V power supply • Compliant to RoHS directive 2002/95/EC MECHANICAL DATA ITEM Module Dimension Viewing Area Dot Size Dot Pitch Mounting Hole Character Size STANDARD VALUE 154.6 x 114.8 118.18 x 89.38 0.09 x 0.33 mm 0.12 x 0.36 148.6 x 106.8 N/a UNIT ABSOLUTE MAXIMUM RATINGS STANDARD VALUE ITEM SYMBOL MIN. 2.7 Power Supply VDD to VSS Input Voltage VI 4.7 0.8 VDD TYP. 3.0 5.0 MAX. 3.3 5.3 VDD V UNIT Note • VSS = 0 V, VDD = 5.0 V ELECTRICAL CHARACTERISTICS ITEM SYMBOL VDD VIO IDD CONDITION L level H level VDD = 5 V 0 °C VEE to VSS 25 °C 50 °C VDD = 5 V, VEE = 26.2 V STANDARD VALUE MIN. 0.8 VDD VSS TYP. 26.2 2.0 MAX. VDD 0.2 VDD mA V UNIT Input Voltage Supply Current Recommended LC Driving Voltage for Normal Temperature Version Module Power Consumption V mA OPTIONS PROCESS COLOR TN STN Gray STN Yellow STN Blue FSTN B&W STN Color x None BACKLIGHT LED EL CCFL x For detailed information, please see the “Product Numbering System” document. Document Number: 37290 Revision: 24-Oct-08 For technical questions, contact: displays@vishay.com www.vishay.com 1 LCD-320D240A Vishay INTERFACE PIN FUNCTION PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SYMBOL FRM LOAD CP DSIP VDD VSS VEE DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 FUNCTION Scan start-up signal Data latch Data shift Display enable signal Power supply for logic Ground Power supply for LCD Display data bus Display data bus Display data bus Display data bus Display data bus Display data bus Display data bus Display data bus 320 x 240 Dots Color LCD DIMENSIONS in millimeters 154.6 ± 0.5 3 2 148.6 ± 0.3 120.2 ± 0.3 (Bezel Opening) 118.18 (Viewing Area) 3 xØ 3. 2x4 2 115.18 (Active Area) ± 0. 2 81.0 ± 0.3 2x4 8.5 ± 0.3 53.4 ± 0.3 91.4 ± 0.3 (Bezel Opening) 89.38 (Viewing Area) 86.38 (Active Area) 0.09 0.12 2 to 4.0 0.33 0.36 2 x 3.2 ± 0.2 Bezel Opening Center 2 x 8.0 ± 0.3 114.8 ± 0.5 106.8 ± 0.3 83.5 ± 0.5 1.3 0. 5 CCFL Connector BHR-03VS-1(JST) 1 2 1.5 4 x R 2.5 ± 0.3 50 ± 10 3 Bezel Opening Area Active Area A 1 > Tolerance X-Direction A = 2.51 ± 0.6 2 > Tolerance Y-Direction B = 2.51 ± 0.6 3 > Obliquity of Display Area (C to D) ± 0.6 C B D www.vishay.com 2 For technical questions, contact: displays@vishay.com Document Number: 37290 Revision: 24-Oct-08 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1