LPE-6562-220MB

LPE-6562 Vishay Dale Surface Mount Transformers/Inductors Gapped and Ungapped Custom Configurations Available ELECTRICAL SPECIFICATIONS (Multiple winds are connected in parallel) Inductance Range: 10µH to 330000µH, measured at 0.10V RMS @ 10kHz without DC current, using an HP 4263A or HP 4284A impedance analyzer. DC Resistance Range: 0.03 ohm to 53.7 ohm, measured at + 25°C ± 5°C. Rated Current Range: 3.00 amps to .06 amps. Dielectric Withstanding Voltage: 500V RMS, 60Hz, 5 seconds. DIMENSIONS in inches (millimeters) Pad Layout 0.058 [1.47] Pad Dimensions Typical, 10 places 0.100 [2.54] 0.058 [1.47] 0.545 [13.84] 0.603 [15.32] Reference Only Typical 4 places STANDARD ELECTRICAL SPECIFICATIONS MODEL IND. (µH) IND. TOL. SCHEMATIC DCR MAX. RATED* SATURATING** MAX. DC CURRENT CURRENT LETTER (Ohms) (Amps) (Amps) Dimensional Outline 6 5 0.606 [15.39] Max. 10 1 0.335 [8.51] Max. 0.695 [17.65] Max. 0.100 [2.54] Typ. 0.575 [14.60] 0.028 [0.71] 0.028 [0.71] Foot print Diagram NOTE: Pad layout guidelines per MIL-STD275E (printed wiring for electronic equipment). Tolerances: xx ± 0.01" [± 0.25mm]. xxx ± 0.005" [± 0.12mm]. Ungapped Models LPE-6562-221NA 220 ± 30% 0.28 0.90 N/A A LPE-6562-331NA 330 ± 30% 0.34 0.81 N/A A LPE-6562-471NA 470 ± 30% 0.40 N/A 0.74 A LPE-6562-681NA 680 ± 30% 0.48 N/A 0.67 A 0.59 LPE-6562-102NA 1000 ± 30% N/A 0.61 A LPE-6562-152NA 1500 ± 30% 0.72 N/A 0.55 A LPE-6562-222NA 2200 ± 30% 0.87 N/A 0.50 A LPE-6562-332NA 3300 ± 30% 1.07 N/A 0.45 A LPE-6562-472NA 4700 ± 30% 1.27 N/A 0.41 A LPE-6562-682NA 6800 ± 30% 1.53 N/A 0.38 A LPE-6562-103NA 10000 ± 30% 1.86 N/A 0.34 A LPE-6562-153NA 15000 ± 30% 2.27 N/A 0.31 A LPE-6562-223NA 22000 ± 30% 8.67 N/A 0.16 A LPE-6562-333NA 33000 ± 30% 10.6 N/A 0.14 A LPE-6562-473NA 47000 ± 30% 12.7 N/A 0.13 A LPE-6562-683NA 68000 ± 30% 15.2 N/A 0.12 A LPE-6562-104NA 100000 ± 30% 18.5 N/A 0.11 A LPE-6562-154NA 150000 ± 30% 37.7 N/A 0.08 A LPE-6562-224NA 220000 ± 30% 45.6 N/A 0.07 A LPE-6562-334NA 330000 ± 30% 53.7 N/A 0.06 A Gapped Models 0.03 ± 20% 10 5.055 3.09 B LPE-6562-100MB 0.04 ± 20% LPE-6562-150MB 15 4.160 2.79 B 0.05 ± 20% LPE-6562-220MB 22 3.460 2.26 B 0.08 ± 20% LPE-6562-330MB 33 2.840 1.81 B 0.12 ± 20% LPE-6562-470MB 47 2.390 1.48 D 0.19 LPE-6562-680MB ± 20% 68 1.990 1.20 C 0.29 LPE-6562-101MB 100 ± 20% 1.650 0.98 D 0.45 LPE-6562-151MB 150 ± 20% 1.350 0.78 E 0.54 LPE-6562-221MB 220 ± 20% 1.115 0.71 E 0.84 LPE-6562-331MB 330 ± 20% 0.912 0.57 E 1.24 LPE-6562-471MB 470 ± 20% 0.765 0.47 E LPE-6562-681MB 680 ± 20% 1.89 0.637 0.38 E 2.91 LPE-6562-102MB 1000 ± 20% 0.526 0.31 E 4.50 LPE-6562-152MB 1500 ± 20% 0.430 0.25 E 6.90 LPE-6562-222MB 2200 ± 20% 0.355 0.20 E 10.4 LPE-6562-332MB 3300 ± 20% 0.290 0.16 E 15.7 LPE-6562-472MB 4700 ± 20% 0.243 0.13 E *DC current that will create a maximum temperature rise of 30°C when applied at + 25°C ambient. **DC current that will typically reduce the initial inductance by 20%. UNGAPPED MODELS: Highest possible inductance with the lowest DCR and highest Q capability. Beneficial in filter, impedance matching and line coupling devices. GAPPED MODELS: Capable of handling large amounts of DC current, tighter inductance tolerance with better temperature stability than ungapped models. Beneficial in DC to DC converters or other circuits carrying DC currents or requiring inductance stability over a temperature range. 1000µH INDUCTANCE VALUE DESCRIPTION - LPE-6562-102NA LPE MODEL 6562 SIZE ± 30% INDUCTANCE TOLERANCE A CORE SAP PART NUMBERING GUIDELINES (INTERNAL) L P E 6 5 SIZE 6 2 R Y 1 0 2 N TOL. U CORE PRODUCT FAMILY PACKAGE CODE INDUCTANCE VALUE See the end of this data book for conversion tables www.vishay.com 106 For technical questions, contact Magnetics@vishay.com Document Number: 34066 Revision 28-Aug-02 LPE-6562 Surface Mount Transformers/Inductors, Gapped and Ungapped, Custom Configurations Available SCHEMATICS (TOP VIEW) Schematic A 6 7 8 9 10 5 4 3 2 1 6 7 8 9 10 Vishay Dale Schematic B 5 4 3 2 1 6 7 8 9 10 Schematic C 5 4 3 2 1 6 7 8 9 10 Schematic D 5 4 3 2 1 6 7 8 9 10 Schematic E 5 4 3 2 1 NOTE: Schematic A is for Ungapped LPE Series. ENVIRONMENTAL PERFORMANCE TEST Thermal Cycling Operating Temperature High Humidity Soldering Heat Mechanical Shock Vibration Solderability CONDITIONS Withstands - 55°C to +125°C - 55°C to + 125°C* 85% Tested to + 230°C Per MIL-STD-202, Method 213 (100G) Per MIL-STD-202, Method 204 (20G) Per industry standards PART MARKING — Vishay Dale — Date code — Marking code (Suffix of model #) — Pin 1 indicator *Must be checked in end use application PACKAGING TAPE SPECIFICATIONS: Carrier Tape Type: Conductive. Cover Tape Type: Anti-static. Cover Tape Adhesion to Carrier: 40 ± 30 grams. REEL SPECIFICATIONS: Diameter (flange): 13" [330.2mm]. Maximum Width (over flanges): 1.197" [30.4mm]. STANDARDS: All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481 “Taping of Surface Mount Components for Automatic Placement”. MODEL LPE-6562 TAPE WIDTH 32mm COMPONENT PITCH 20mm UNITS PER 13 INCH REEL 300 Tape and Reel Orientation Pin 1 Indicator Cover Tape Carrier Tape Label Area Embossed Cavity USER DIRECTION OF FEED Document Number: 34066 Revision 28-Aug-02 For technical questions, contact Magnetics@vishay.com www.vishay.com 107