LPE5047ER470MG

LPE-5047 Vishay Dale Surface Mount Transformers/Inductors, Gapped and Ungapped Custom Configurations Available ELECTRICAL SPECIFICATIONS (Multiple winds are connected in parallel) Inductance Range: 10 µH to 68 000 µH, measured at 0.10 V RMS at 10 kHz without DC current, using an HP 4263A or HP 4284A impedance analyzer DC Resistance Range: 0.03 Ω to 24.1 Ω, measured at + 25 °C ± 5 °C Rated Current Range: 2.29 amps to 0.07 amps Dielectric Withstanding Voltage: 500 V RMS, 60 Hz, 5 seconds RoHS COMPLIANT DIMENSIONS in inches [millimeters] Pad Layout 0.045 [1.14] Pad Dimensions Typical, 10 places 0.079 [2.01] 0.045 [1.14] 0.414 [10.52] 0.459 [11.66] Reference Only Typical 4 places STANDARD ELECTRICAL SPECIFICATIONS MODEL Ungapped Models (A) LPE5047ER151NU LPE5047ER221NU LPE5047ER331NU LPE5047ER471NU LPE5047ER681NU LPE5047ER102NU LPE5047ER152NU LPE5047ER222NU LPE5047ER332NU LPE5047ER472NU LPE5047ER682NU LPE5047ER103NU LPE5047ER153NU LPE5047ER223NU LPE5047ER333NU LPE5047ER473NU LPE5047ER683NU Gapped Models (B) LPE5047ER100MG LPE5047ER150MG LPE5047ER220MG LPE5047ER330MG LPE5047ER470MG LPE5047ER680MG LPE5047ER101MG LPE5047ER151MG LPE5047ER221MG LPE5047ER331MG LPE5047ER471MG LPE5047ER681MG LPE5047ER102MG LPE5047ER152MG LPE5047ER222MG LPE5047ER332MG LPE5047ER472MG IND. (µH) 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10 000 15 000 22 000 33 000 47 000 68 000 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 DCR MAX. RATED* SATURATING IND. SCHEMATIC MAX. DC CURRENT CURRENT** TOL. LETTER (Ohms) (Amps) (Amps) ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 30 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % ± 20 % A A A A A A A A A A A A A A A A A B B B C D D D D E E E E E E E E E 0.20 0.24 0.29 0.35 0.42 0.51 0.63 0.76 1.00 2.24 2.70 3.27 6.26 7.58 9.50 18.5 24.1 0.03 0.04 0.05 0.09 0.13 0.15 0.24 0.37 0.55 0.85 1.29 1.96 2.38 3.66 5.47 8.48 13.2 0.79 0.72 0.65 0.59 0.54 0.49 0.44 0.40 0.35 0.24 0.21 0.19 0.14 0.13 0.11 0.08 0.07 2.29 2.07 1.68 1.35 1.11 1.01 0.81 0.65 0.53 0.43 0.35 0.28 0.26 0.21 0.17 0.14 0.11 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 2.690 2.230 1.860 1.540 1.300 1.085 0.900 0.740 0.610 0.500 0.420 0.350 0.290 0.240 0.195 0.160 0.135 Dimensional Outline 6 0.472 [11.99] Max. 10 5 1 0.248 [6.30] Max. 0.525 [13.34] Max. 0.437 [11.10] 0.079 [2.01] Typ. 0.028 [0.71] 0.028 [0.71] Foot print Diagram NOTE: Pad layout guidelines per MIL-STD-275E (printed wiring for electronic equipment). Tolerances: xx ± 0.01" [± 0.25 mm]; xxx ± 0.005" [± 0.12 mm] The underside of these components contains metal and thus should not come in contact with active circuit traces. * DC current that will create a maximum temperature rise of 30 °C when applied at + 25 °C ambient. ** DC current that will typically reduce the initial inductance by 20 % UNGAPPED MODELS: Highest possible inductance with the lowest DCR and highest Q capability. Beneficial in filter, impedance matching and line coupling devices. GAPPED MODELS: Capable of handling large amounts of DC current, tighter inductance tolerance with better temperature stability than ungapped models. Beneficial in DC to DC converters or other circuits carrying DC currents or requiring inductance stability over a temperature range. DESCRIPTION LPE 5047 1000 µH ± 30 % A ER e2 MODEL SIZE INDUCTANCE VALUE INDUCTANCE TOLERANCE CORE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER L P E 5 0 SIZE 4 7 E R 1 0 INDUCTANCE VALUE 2 N TOL. U CORE PRODUCT FAMILY PACKAGE CODE NOTE Series is also available with SnPb terminations by using package code RY for tape and reel (in place of ER) or SM for bulk (in place of EB). Document Number: 34065 Revision: 10-Oct-08 For technical questions, contact: magnetics@vishay.com www.vishay.com 157 LPE-5047 Vishay Dale Surface Mount Transformers/Inductors, Gapped and Ungapped Custom Configurations Available SCHEMATIC (TOP VIEW) Schematic A 6 7 8 9 10 5 4 3 2 6 7 8 9 Schematic B 5 4 3 2 6 7 8 9 Schematic C 5 4 3 2 6 7 8 9 Schematic D 5 4 3 2 6 7 8 9 Schematic E 5 4 3 2 1 1 10 1 10 1 10 1 10 NOTE: Schematic A is for Ungapped LPE Series ENVIRONMENTAL PERFORMANCE TEST Thermal Cycling High Humidity Soldering Heat Mechanical Shock Vibration Solderability CONDITIONS Withstands - 55 °C to + 125 °C PART MARKING Operating Temperature - 55 °C to + 125 °C* 85 % Tested to + 230 °C Per MIL-STD-202, Method 213 (100G) Per MIL-STD-202, Method 204 (20G) Per industry standards - Vishay Dale - Date code - Marking code (Suffix of model #) - Pin 1 indicator * Must be checked in end use application PACKAGING TAPE SPECIFICATIONS: Carrier Tape Type: Conductive Cover Tape Type: Anti-static Cover Tape Adhesion to Carrier: 40 ± 30 grams REEL SPECIFICATIONS: Diameter (flange): 13" [330.2 mm] Maximum Width (over flanges): 1.197" [30.4 mm] Tape and Reel Orientation STANDARDS: All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481 “Taping of Surface Mount Components for Automatic Placement”. MODEL LPE-5047 TAPE WIDTH 24 mm COMPONENT PITCH 16 mm UNITS PER 13 INCH REEL 600 Pin 1 Indicator Cover Tape Carrier Tape USER DIRECTION OF FEED Embossed Cavity Label Area NOTE: Top view shown with cover tape removed www.vishay.com 158 For technical questions, contact: magnetics@vishay.com Document Number: 34065 Revision: 10-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1