LS103C-GS08

LS103A / 103B / 103C Vishay Semiconductors Small Signal Schottky Diodes Features • Integrated protection ring against static discharge e2 • Low capacitance • Low leakage current • Low forward voltage drop • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 9612009 Applications • • • • HF-Detector Protection circuit Small battery charger AC-DC / DC-DC converters Mechanical Data Case: QuadroMELF Glass case SOD80 Weight: approx. 34 mg Cathode Band Color: Black Packaging Codes/Options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Part LS103A LS103B LS103C Type differentiation VR = 40 V, VF at IF = 20 mA max. 370 mV VR = 30 V, VF at IF = 20 mA max. 370 mV VR = 20 V, VF at IF = 20 mA max. 370 mV Ordering code LS103A-GS18 or LS103A-GS08 LS103B-GS18 or LS103B-GS08 LS103C-GS18 or LS103C-GS08 Remarks Tape and Reel Tape and Reel Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Reverse voltage Test condition Part LS103A LS103B LS103C Peak forward surge current Power dissipation tp = 300 µs, square pulse l = 4 mm, TL = constant Symbol VR VR VR IFSM Ptot Value 40 30 20 15 400 Unit V V V A mW Document Number 85631 Rev. 1.3, 17-Mar-06 www.vishay.com 1 LS103A / 103B / 103C Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Junction to ambient air Junction temperature Storage temperature range Test condition l = 4 mm, TL = constant Symbol RthJA Tj Tstg Value 250 125 - 65 to + 150 Unit K/W °C °C Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Reverse Breakdown Voltage Test condition IR = 10 µA Part LS103A LS103B LS103C Leakage current VR = 30 V V R = 20 V V R = 10 V Forward voltage drop Diode capacitance Reverse recovery time IF = 20 mA IF = 200 mA VR = 0 V, f = 1 MHz IF = IR = 50 to 200 mA, recover to 0.1 IR LS103A LS103B LS103C Symbol V(BR)R V(BR)R V(BR)R IR IR IR VF VF CD trr 50 10 Min 40 30 20 5 5 5 370 600 Typ. Max Unit V V V µA µA µA mV mV pF ns Typical Characteristics Tamb = 25 °C, unless otherwise specified 1000 100 10 1 5 IF - Forward Current (mA) IF - Forward Current (A) 4 3 2 0.1 0.01 0.001 0 100 200 300 400 500 600 700 800 900 1000 1 0 0.0 16766 0.5 1.0 1.5 2.0 16765 VF - Forward Voltage (mV) VF - Forward Voltage (V) Figure 1. Forward Current vs. Forward Voltage Figure 2. Forward Current vs. Forward Voltage www.vishay.com 2 Document Number 85631 Rev. 1.3, 17-Mar-06 LS103A / 103B / 103C Vishay Semiconductors 10000 IR - Reverse Current (A) 1000 100 10 1 0 16767 20 40 60 80 100 120 140 160 Tj - Junction Temperature (°C) Figure 3. Reverse Current vs. Junction Temperature 30 f = 1 MHz CD - Diode Capacitance (pF) 25 20 15 10 5 0 0 5 10 15 20 25 30 16768 VR - Reverse Voltage (V) Figure 4. Diode Capacitance vs. Reverse Voltage 25 Itot - Typ. Non Repetitve Forward Surge Current (A) 20 15 10 5 0 0.1 16769 1.0 10.0 tP - Pulse width (ms) Figure 5. Typ. Non Repetitive Forward Surge Current vs. Pulse width Document Number 85631 Rev. 1.3, 17-Mar-06 www.vishay.com 3 LS103A / 103B / 103C Vishay Semiconductors Package Dimensions in mm (Inches) 12071 www.vishay.com 4 Document Number 85631 Rev. 1.3, 17-Mar-06 LS103A / 103B / 103C Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Document Number 85631 Rev. 1.3, 17-Mar-06 www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1