M3035S

New Product M3035S, M3045S, MI3035S & MI3045S Vishay General Semiconductor Schottky Barrier Rectifier FEATURES • Guardring for overvoltage protection • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability • High frequency operation • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection applications. MECHANICAL DATA Case: TO-220AB and TO-262AA Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum TO-220AB K TO-262AA 2 1 M30xxS PIN 1 PIN 3 PIN 2 CASE 3 1 MI30xxS PIN 1 PIN 3 PIN 2 K 2 3 PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF at IF = 30 A TJ max. 30 A 35 V, 45 V 200 A 0.61 V 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Peak forward surge current 10 ms single half sine-wave superimposed on rated load Peak repetitive reverse current per leg at tp = 2 µs, 1 kHz Voltage rate of change (rated VR) Operating junction temperature range Storage temperature range SYMBOL VRRM IF(AV) IFSM IRRM dV/dt TJ TSTG M(I)3035S 35 30 200 2.0 10 000 - 65 to + 150 - 65 to + 175 M(I)3045S 45 UNIT V A A A V/µs °C °C ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum instantaneous reverse current at rated VR (2) Typical junction capacitance 4.0 V, 1 MHz Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms Document Number: 88952 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 TEST CONDITIONS IF = 1 5 A IF = 3 0 A IF = 1 5 A IF = 3 0 A TJ = 25 °C VF TJ = 125 °C TJ = 25 °C TJ = 125 °C IR CJ SYMBOL TYP. 0.54 0.65 0.46 0.61 40 26 980 MAX. 0.70 V 0.66 200 55 µA mA pF UNIT New Product M3035S, M3045S, MI3035S & MI3045S Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL RθJC M30xxS 2.0 MI30xxS UNIT °C/W ORDERING INFORMATION (Example) PACKAGE TO-220AB TO-262AA PREFERRED P/N M3045S-E3/4W MI3045S-E3/4W UNIT WEIGHT (g) 1.878 1.454 PACKAGE CODE 4W 4W BASE QUANTITY 50/tube 50/tube DELIVERY MODE Tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 35 100 MI30xxS Instantaneous Forward Current (A) Average Forward Current (A) 30 25 M30xxS 20 15 10 5 0 0 25 50 75 100 125 150 TJ = 150 °C 10 TJ = 125 °C 1 Pulse Width = 300 µs 1 % Duty Cycle TJ = 25 °C 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Case Temperature (°C) Instantaneous Forward Voltage (V) Figure 1. Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics 300 1000 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Instantaneous Reverse Current (mA) Peak Forward Surge Current (A) 250 100 TJ = 150 °C 200 10 TJ = 125 °C 150 1 100 0.1 50 0.01 TJ = 25 °C 0 1 10 100 0.001 10 20 30 40 50 60 70 80 90 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 4. Typical Reverse Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88952 Revision: 19-May-08 New Product M3035S, M3045S, MI3035S & MI3045S Vishay General Semiconductor 10 000 10 Transient Thermal Impedance (°C/W) Junction Capacitance (pF) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Junction to Case 1000 1 100 0.1 1 10 100 0.1 0.01 0.1 1 10 100 Reverse Voltage (V) t - Pulse Duration (s) Figure 5. Typical Junction Capacitance Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 3 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) PIN 2 TO-262AA 0.411 (10.45) Max. 30° (Typ) (REF) 0.250 (6.35) Min. K 0.185 (4.70) 0.175 (4.44) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.950 (24.13) 0.920 (23.37) 0.350 (8.89) 0.330 (8.38) 0.401 (10.19) 0.381 (9.68) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) PIN 2 3 0.510 (12.95) 0.470 (11.94) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.104 (2.65) 0.096 (2.45) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.35) Document Number: 88952 Revision: 19-May-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1