M8340102K1004GADSL

MDM (Military M83401) Vishay Dale Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics FEATURES • • • • • MIL-PRF-83401 qualified Epoxy molded construction All device leads are hot-solder dipped Available in tube pack TCR available in “K” (± 100 ppm/°C) or “M” (± 300 ppm/°C) depending on style • 100 % screen tested per Group A, Subgroup 1 of MIL-PRF-83401 • All devices are capable of passing the MIL-STD-202, Method 210, Condition D, “Resistance to Soldering Heat” test STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PINS NO SCHEMATIC RESISTOR POWER RATING MAX. at 70 °C W 0.10 0.20 0.05 0.10 0.20 0.05 PACKAGE POWER RATING MAX. at 70 °C W 1.30 1.40 1.20 1.50 1.60 1.40 RESISTANCE RANGE Ω 10 - 1M 10 - 1M Consult factory 10 - 1M 10 - 1M Consult factory STANDARD TOLERANCE ±% ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) TEMPERATURE WEIGHT COEFFICIENT g (- 55 °C to + 125 °C) K, M (1) K, M (1) K, M (1) K, M (1) K, M (1) K, M (1) 1.3 1.3 1.3 1.5 1.5 1.5 MDM 14 01 MDM 14 03 MDM 14 05 MDM 16 01 MDM 16 03 MDM 16 05 Notes (1) K = ± 100 ppm/°C; M = ± 300 ppm/°C (2) ± 1 % and ± 5 % tolerances available on request GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M8340101M2201GBD04 (preferred part numbering format) M MIL STYLE 8 3 4 0 1 0 1 M 2 2 0 1 G B D 0 4 CHARACTERISTIC RESISTANCE TOLERANCE VALUE 01 = 14 Pin K = 100 ppm 3 digit significant F=±1% M83401 figure, followed 02 = 16 Pin M = 300 ppm G=±2% by a multiplier J=±5% 10R0 = 10 Ω 3302 = 33 kΩ 1004 = 1 MΩ Historical Part Number example: M8340101M2201GB (will continue to be accepted) 2201 01 M83401 M SPEC SHEET MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE SCHEMATIC A = Isolated B = Bussed PACKAGING D04 = Tin/Lead, Tube DSL = Tin/Lead, Tube, Single Lot Date Code G B D04 TOLERANCE SCHEMATIC PACKAGING New Global Part Numbering: M8340102KA001GJD04 (preferred part numbering format) M MIL STYLE 8 3 4 0 1 0 2 K A 0 0 1 G J D 0 4 RESISTANCE TOLERANCE VALUE Per std. Mil. Spec F=±1% M83401 01 = 14 Pin K = 100 ppm (see Impedence G=±2% 02 = 16 Pin M = 300 ppm codes table) J=±5% Historical Part Number example: M8340102KA001GJ (will continue to be accepted) M83401 02 K A001 SPEC SHEET CHARACTERISTIC MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE SCHEMATIC J = Dual Terminator PACKAGING D04 = Tin/Lead, Tube DSL = Tin/Lead, Tube, Single Lot Date Code J D04 G TOLERANCE SCHEMATIC PACKAGING www.vishay.com 1 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31516 Revision: 08-Jul-08 MDM (Military M83401) Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics DIMENSIONS in inches [millimeters] 0.310 ± 0.010 [7.87 ± 0.254] A ± 0.010 [0.254] TYP 0.030 [0.762] 0.250 ± 0.005 [6.35 ± 0.127] Vishay Dale 0.120 ± 0.005 [3.05 ± 0.127] Pin #1 Identification 0.130 + 0.015 - 0.005 [3.30 + 0.381 - 0.127] 0.075 ± 0.015 [1.91 ± 0.381] 0.100 ± 0.010 [2.54 ± 0.254] Non-Accumulative Tol. "C" Spaces B ± 0.010 [0.254] 0.050 ± 0.005 [1.27 ± 0.127] 0.018 ± 0.003 [0.457 ± 0.076] 0.290 Min. 0.320 Nom. 0.360 Max. [7.37 Min. 8.13 Nom. 9.14 Max.] Pin #1 0.010 + 0.005 - 0.002 [0.254 + 0.127 - 0.051] VISHAY DALE MODEL MDM14 MDM16 A 0.750 [19.05] 0.850 [21.59] B 0.600 [15.24] 0.700 [17.78] C 6 7 IMPEDANCE CODES CODE A001 A002 A003 A004 A005 A006 A007 A008 A009 R1 (Ω) 82 120 130 160 180 180 220 220 330 R2 (Ω) 130 200 210 260 240 390 270 330 390 CODE A010 A011 A012 A013 A014 A015 A016 A017 A018 R1 (Ω) 330 330 1.5K 3K 180 270 560 560 620 R2 (Ω) 470 680 3.3K 6.2K 270 270 560 1.2K 2.7K TECHNICAL SPECIFICATIONS PARAMETER Maximum Operating Voltage Voltage Coefficient of Resistance Dielectric Strength Insulation Resistance Operating Temperature Range Storage Temperature Range UNIT VDC Veff VAC Ω °C °C MDM SERIES 100 < 50 ppm 200 per min. 10 000 M - 55 to + 125 - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Solderability Body Terminals Permanency testing per MIL-PRF-83401 Per MIL-PRF-83401 Molded epoxy Copper alloy, hot-solder dipped Document Number: 31516 Revision: 08-Jul-08 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 2 MDM (Military M83401) Vishay Dale Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics CIRCUIT APPLICATIONS 01 SCHEMATIC MDM1401 (M8340101xxxxxxB) MDM1601 (M8340102xxxxxxB) 13 or 15 resistors with one pin common •••••••• The MDMxx01 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin. Commonly used in the following applications: • MOS/ROM Pull-up/Pull-down • Open Collector Pull-up • “Wired OR” Pull-up • Power Driven Pull-up • TTL Input Pull-down • Digital Pulse Squaring • TTL Unused Gate Pull-up • High Speed Parallel Pull-up MDM1401 Pin #1 MDM1601 03 SCHEMATIC MDM1403 (M8340101xxxxxxA) MDM1603 (M8340102xxxxxxA) 7 or 8 isolated resistors The MDMxx03 provides the user with a choice of 7 or 8 nominally equal resistors, with each resistor isolated from all others. Commonly used in the following applications: • “Wired OR” Pull-up • Long-line Impedance Balancing • Power Driven Pull-up • LED Current Limiting • Power Gate Pull-up • ECL Output Pull-down • Line Termination • TTL Input Pull-down MDM1403 Pin #1 MDM1603 05 SCHEMATIC MDM1405 (M8340101xxxxxxJ) MDM1605 (M8340102xxxxxxJ) 12 or 14 resistor pairs The MDMxx05 provides the user with a choice of 12 or 14 pairs of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements. R1 R2 R1 R2 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R1 R2 R2 R1 R2 R1 R2 R2 R1 R2 R1 R1 R2 R1 Pin #1 MDM1405, MDM1605 CAGE CODE: 91637 01 Schematic 03 Schematic 05 Schematic Power Rating (W) Power Rating (W) 1.50 1.30 MDM 16 MDM 14 1.60 1.40 MDM 16 MDM 14 Power Rating (W) 1.40 1.20 1.00 MDM 16 MDM 14 1.00 1.00 Single Resistor 0.10 0.20 Single Resistor Single Resistor 0.05 - 55 + 25 + 70 + 125 + 150 - 55 + 25 + 70 + 125 + 150 - 55 + 25 + 70 + 125 + 150 Derating Ambient Temperature °C Ambient Temperature °C Ambient Temperature °C www.vishay.com 3 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31516 Revision: 08-Jul-08 MDM (Military M83401) Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics Vishay Dale PERFORMANCE TEST Power Conditioning CONDITIONS 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h ± 4 h at + 25 °C ambient temperature 5 cycles between - 65 °C and + 125 °C MAX. ΔR (Typical Test Lots) ± 0.50 % ΔR ± 0.50 % ΔR ± 0.25 % ΔR (Char. K) ± 0.50 % ΔR (Char. M) ± 0.25 % ΔR (Char. K) ± 0.50 % ΔR (Char. M) ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.50 % ΔR (Char. K) ± 2.00 % ΔR (Char. M) ± 0.25 % ΔR Thermal Shock Short Time Overload 2.5 x rated working voltage for 5 s Low Temperature Operation 45 min at full rated working voltage at - 65 °C Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH Resistance to Soldering Heat Leads immersed in + 260 °C solder to within 1/16" of body for 10 s Shock Total of 18 shocks at 100 G's Vibration 12 h at maximum of 20 G's between 10 and 2000 Hz 1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” for full 1000 h period 4.5 pound pull for 30 s 10 000 MΩ (minimum) Load Life Terminal Strength Insulation Resistance - Dielectric Withstanding Voltage No evidence of arcing or damage (200 VRMS for 1 min) - Document Number: 31516 Revision: 08-Jul-08 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 4 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1