MDM (Military M83401)
Vishay Dale
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics
FEATURES
• • • • • MIL-PRF-83401 qualified Epoxy molded construction All device leads are hot-solder dipped Available in tube pack TCR available in “K” (± 100 ppm/°C) or “M” (± 300 ppm/°C) depending on style • 100 % screen tested per Group A, Subgroup 1 of MIL-PRF-83401 • All devices are capable of passing the MIL-STD-202, Method 210, Condition D, “Resistance to Soldering Heat” test
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE MODEL/ PINS NO SCHEMATIC RESISTOR POWER RATING MAX. at 70 °C W 0.10 0.20 0.05 0.10 0.20 0.05 PACKAGE POWER RATING MAX. at 70 °C W 1.30 1.40 1.20 1.50 1.60 1.40 RESISTANCE RANGE Ω 10 - 1M 10 - 1M Consult factory 10 - 1M 10 - 1M Consult factory STANDARD TOLERANCE ±% ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) TEMPERATURE WEIGHT COEFFICIENT g (- 55 °C to + 125 °C) K, M (1) K, M (1) K, M (1) K, M (1) K, M (1) K, M (1) 1.3 1.3 1.3 1.5 1.5 1.5
MDM 14 01 MDM 14 03 MDM 14 05 MDM 16 01 MDM 16 03 MDM 16 05 Notes (1) K = ± 100 ppm/°C; M = ± 300 ppm/°C (2) ± 1 % and ± 5 % tolerances available on request
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340101M2201GBD04 (preferred part numbering format)
M
MIL STYLE
8
3
4
0
1
0
1
M
2
2
0
1
G
B
D
0
4
CHARACTERISTIC RESISTANCE TOLERANCE VALUE 01 = 14 Pin K = 100 ppm 3 digit significant F=±1% M83401 figure, followed 02 = 16 Pin M = 300 ppm G=±2% by a multiplier J=±5% 10R0 = 10 Ω 3302 = 33 kΩ 1004 = 1 MΩ Historical Part Number example: M8340101M2201GB (will continue to be accepted) 2201 01 M83401 M SPEC SHEET MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE
SCHEMATIC A = Isolated B = Bussed
PACKAGING D04 = Tin/Lead, Tube DSL = Tin/Lead, Tube, Single Lot Date Code
G
B
D04
TOLERANCE
SCHEMATIC
PACKAGING
New Global Part Numbering: M8340102KA001GJD04 (preferred part numbering format)
M
MIL STYLE
8
3
4
0
1
0
2
K
A
0
0
1
G
J
D
0
4
RESISTANCE TOLERANCE VALUE Per std. Mil. Spec F=±1% M83401 01 = 14 Pin K = 100 ppm (see Impedence G=±2% 02 = 16 Pin M = 300 ppm codes table) J=±5% Historical Part Number example: M8340102KA001GJ (will continue to be accepted) M83401 02 K A001 SPEC SHEET CHARACTERISTIC MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE
SCHEMATIC J = Dual Terminator
PACKAGING D04 = Tin/Lead, Tube DSL = Tin/Lead, Tube, Single Lot Date Code
J D04
G
TOLERANCE
SCHEMATIC
PACKAGING
www.vishay.com 1
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31516 Revision: 08-Jul-08
MDM (Military M83401)
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics
DIMENSIONS in inches [millimeters]
0.310 ± 0.010 [7.87 ± 0.254] A ± 0.010 [0.254] TYP 0.030 [0.762] 0.250 ± 0.005 [6.35 ± 0.127]
Vishay Dale
0.120 ± 0.005 [3.05 ± 0.127] Pin #1 Identification 0.130 + 0.015 - 0.005 [3.30 + 0.381 - 0.127] 0.075 ± 0.015 [1.91 ± 0.381] 0.100 ± 0.010 [2.54 ± 0.254] Non-Accumulative Tol. "C" Spaces B ± 0.010 [0.254] 0.050 ± 0.005 [1.27 ± 0.127] 0.018 ± 0.003 [0.457 ± 0.076] 0.290 Min. 0.320 Nom. 0.360 Max. [7.37 Min. 8.13 Nom. 9.14 Max.]
Pin #1
0.010 + 0.005 - 0.002 [0.254 + 0.127 - 0.051]
VISHAY DALE MODEL MDM14 MDM16
A 0.750 [19.05] 0.850 [21.59]
B 0.600 [15.24] 0.700 [17.78]
C 6 7
IMPEDANCE CODES
CODE A001 A002 A003 A004 A005 A006 A007 A008 A009 R1 (Ω) 82 120 130 160 180 180 220 220 330 R2 (Ω) 130 200 210 260 240 390 270 330 390 CODE A010 A011 A012 A013 A014 A015 A016 A017 A018 R1 (Ω) 330 330 1.5K 3K 180 270 560 560 620 R2 (Ω) 470 680 3.3K 6.2K 270 270 560 1.2K 2.7K
TECHNICAL SPECIFICATIONS
PARAMETER Maximum Operating Voltage Voltage Coefficient of Resistance Dielectric Strength Insulation Resistance Operating Temperature Range Storage Temperature Range UNIT VDC Veff VAC Ω °C °C MDM SERIES 100 < 50 ppm 200 per min. 10 000 M - 55 to + 125 - 55 to + 150
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents Solderability Body Terminals Permanency testing per MIL-PRF-83401 Per MIL-PRF-83401 Molded epoxy Copper alloy, hot-solder dipped
Document Number: 31516 Revision: 08-Jul-08
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com 2
MDM (Military M83401)
Vishay Dale
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics
CIRCUIT APPLICATIONS
01 SCHEMATIC MDM1401 (M8340101xxxxxxB) MDM1601 (M8340102xxxxxxB) 13 or 15 resistors with one pin common
••••••••
The MDMxx01 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin. Commonly used in the following applications: • MOS/ROM Pull-up/Pull-down • Open Collector Pull-up • “Wired OR” Pull-up • Power Driven Pull-up • TTL Input Pull-down • Digital Pulse Squaring • TTL Unused Gate Pull-up • High Speed Parallel Pull-up
MDM1401 Pin #1 MDM1601
03 SCHEMATIC
MDM1403 (M8340101xxxxxxA) MDM1603 (M8340102xxxxxxA) 7 or 8 isolated resistors The MDMxx03 provides the user with a choice of 7 or 8 nominally equal resistors, with each resistor isolated from all others. Commonly used in the following applications: • “Wired OR” Pull-up • Long-line Impedance Balancing • Power Driven Pull-up • LED Current Limiting • Power Gate Pull-up • ECL Output Pull-down • Line Termination • TTL Input Pull-down
MDM1403 Pin #1 MDM1603
05 SCHEMATIC MDM1405 (M8340101xxxxxxJ) MDM1605 (M8340102xxxxxxJ) 12 or 14 resistor pairs The MDMxx05 provides the user with a choice of 12 or 14 pairs of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements.
R1 R2 R1 R2 R2
R1 R2 R1 R2
R1 R2 R1 R2
R1
R1 R2 R2
R1 R2 R1 R2 R2
R1 R2 R1
R1 R2
R1
Pin #1
MDM1405, MDM1605
CAGE CODE: 91637
01 Schematic
03 Schematic
05 Schematic
Power Rating (W)
Power Rating (W)
1.50 1.30
MDM 16 MDM 14
1.60 1.40
MDM 16 MDM 14
Power Rating (W)
1.40 1.20 1.00
MDM 16 MDM 14
1.00
1.00
Single Resistor 0.10
0.20
Single Resistor Single Resistor 0.05
- 55
+ 25
+ 70
+ 125 + 150
- 55
+ 25
+ 70
+ 125 + 150
- 55
+ 25
+ 70
+ 125 + 150
Derating
Ambient Temperature °C
Ambient Temperature °C
Ambient Temperature °C
www.vishay.com 3
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31516 Revision: 08-Jul-08
MDM (Military M83401)
Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics
Vishay Dale
PERFORMANCE
TEST Power Conditioning CONDITIONS 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h ± 4 h at + 25 °C ambient temperature 5 cycles between - 65 °C and + 125 °C MAX. ΔR (Typical Test Lots) ± 0.50 % ΔR ± 0.50 % ΔR ± 0.25 % ΔR (Char. K) ± 0.50 % ΔR (Char. M) ± 0.25 % ΔR (Char. K) ± 0.50 % ΔR (Char. M) ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.50 % ΔR (Char. K) ± 2.00 % ΔR (Char. M) ± 0.25 % ΔR
Thermal Shock
Short Time Overload
2.5 x rated working voltage for 5 s
Low Temperature Operation
45 min at full rated working voltage at - 65 °C
Moisture Resistance
240 h with humidity ranging from 80 % RH to 98 % RH
Resistance to Soldering Heat
Leads immersed in + 260 °C solder to within 1/16" of body for 10 s
Shock
Total of 18 shocks at 100 G's
Vibration
12 h at maximum of 20 G's between 10 and 2000 Hz 1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” for full 1000 h period 4.5 pound pull for 30 s 10 000 MΩ (minimum)
Load Life
Terminal Strength
Insulation Resistance
-
Dielectric Withstanding Voltage
No evidence of arcing or damage (200 VRMS for 1 min)
-
Document Number: 31516 Revision: 08-Jul-08
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com 4
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1
