DFM (Military M83401)
Vishay Dale
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ030, Schematics A (11), B (12), J (15)
FEATURES
• 11, 12, 15 Schematics; hot-solder dipped • MIL-PRF-83401 qualified • Thick film resisitive elements • TCR available in “K” (± 100 ppm/°C) or “M” (± 300 ppm/°C) characteristic • 100 % screen tested per Group A, Subgroup 1 of MIL-PRF-83401 • 0.065" [1.65 mm] height for high density packaging
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY DALE MODEL POWER RATING P70 °C ELEMENT W 0.050 0.025 0.015 P70 °C PACKAGE W 0.350 0.325 0.350 CIRCUIT SCHEMATIC 11 12 15 LIMITING ELEMENT VOLTAGE MAX. V≅ 50 50 50 TEMPERATURE COEFFICIENT (1) (- 55 °C to + 125 °C) K, M K, M K, M STANDARD (2) TOLERANCE % 2 2 2 RESISTANCE RANGE Ω 10R0 - 1M0 10R0 - 1M0 see table
DFM
Notes (1) K = ± 100 ppm/°C; M = ± 300 ppm/°C (2) ± 1 % and ± 5 % tolerance available • Consult factory for stocked values
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: M8340103M6801GAD05 (preferred part numbering format)
M
MIL STYLE
8
3
4
0
1
0
3
M
6
8
0
1
G
A
D
0
5
PACKAGING
RESISTANCE TOLERANCE VALUE M83401 03 3 digit significant F=±1% K = 100 ppm M = 300 ppm figure, followed G=±2% by a multiplier J=±5% 10R0 = 10 Ω 3302 = 33 k Ω 1004 = 1 MΩ Historical Part Number example: M8340103M6801G A (will continue to be accepted) SPEC SHEET CHARACTERISTIC
SCHEMATIC A = Isolated B = Bussed
D05 = Tin/Lead, Tube DSL = Tin/Lead, Tube, Single Lot Date Code
M83401
MIL STYLE
03
SPEC SHEET
M
CHARACTERISTIC
6801
RESISTANCE VALUE
G
TOLERANCE
A
SCHEMATIC
D05
PACKAGING
New Global Part Numbering: M8340103KA001GJD05 (preferred part numbering format)
M
MIL STYLE M83401
8
3
4
0
1
0
3
K
A
0
0
1
G
J
D
0
5
PACKAGING
SPEC SHEET CHARACTERISTIC 03 K = 100 ppm M = 300 ppm
RESISTANCE VALUE Per Std. MIL. Spec (see Impedence Codes table)
TOLERANCE F=±1% G=±2% J=±5%
SCHEMATIC J = Dual Terminator
D05 = Tin/Lead, Tube DSL = Tin/Lead, Tube, Single Lot Date Code
Historical Part Number example: M8340103KA001GJ (will continue to be accepted)
M83401
MIL STYLE
03
SPEC SHEET
K
CHARACTERISTIC
A001
RESISTANCE VALUE
G
TOLERANCE
J
SCHEMATIC
D05
PACKAGING
www.vishay.com 330
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31517 Revision: 08-Jul-08
DFM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ030, Schematics A (11), B (12), J (15)
DIMENSIONS in inches [millimeters]
Pin #1 0.050 [1.27] Typ. 0.019 ± 0.006 [0.483 ± 0.15] 0.305 [7.75] Max. 0.250 [6.35] Min. 0.075 [1.91] Max. 0.250 [6.35] Min. 0.005 + 0.004 - 0.002 [0.127 + 0.102 - 0.051]
Vishay Dale
0.365 [9.27] Min. 0.385 [9.78] Max.
0.825 [20.96] Max.
11 Schematic
Power Rating (W)
12 Schematic
Power Rating (W)
15 Schematic
Power Rating (W)
0.400 0.350
DFM1411 Package
0.400 DFM1412 Package 0.325
0.400 0.350
DFM1415 Package
0.200
0.200
0.200
Single Resistor 0.050 0.025 - 55 + 25 + 70 + 125 + 150 - 55
Single Resistor 0.015 + 25 + 70 + 125 + 150 - 55
Single Resistor + 25 + 70 + 125 + 150
Derating
Ambient Temperature °C
Ambient Temperature °C
Ambient Temperature °C
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents Solderability Terminals Body Permanency testing per MIL-PRF-83401 Per MIL-PRF-83401 Per MIL-STD-1276 DFM1411, DFM1412 and DFM1415 = Type G (hot solder dipped) Hot solder dipped leads supplied as standard finish. Epoxy filled ceramic sandwich
IMPEDANCE CODES
CODE A001 A002 A003 A004 A005 A006 A007 A008 A009 R1 (Ω) 82 120 130 160 180 180 220 220 330 R2 (Ω) 130 200 210 260 240 390 270 330 390 CODE A010 A011 A012 A013 A014 A015 A016 A017 A018 R1 (Ω) 330 330 1.5K 3K 180 270 560 560 620 R2 (Ω) 470 680 3.3K 6.2K 270 270 560 1.2K 2.7K
Document Number: 31517 Revision: 08-Jul-08
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com 331
DFM (Military M83401)
Vishay Dale
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ030, Schematics A (11), B (12), J (15)
CIRCUIT APPLICATIONS
11 Schematic
DFM1411 (M8340103xxxxxxA) 7 isolated resistors The DFM1411 provides the user with 7 nominally equal resistors with each resistor isolated from all others. Commonly used in the following applications:
DFM1411
Pin #1
• “Wired OR” Pull-up • Power Driven Pull-up • TTL Input Pull-down
• Line Termination • ECL Output Pull-down
• LED Current Limiting • Power Gate Pull-up
• Long-line Impedance balancing
12 Schematic
DFM1412 (M8340103xxxxxxB) 13 resistors with one pin common The DFM1412 provides the user with a choice of 13 nominally equal resistors, each connected to a common pin. Commonly used in the following applications: • MOS/ROM Pull-up/ • “Wired OR” Pull-up • Power Driven Pull-up • TTL Unused Gate Pull-up • Digital Pulse Squaring • TTL Input Pull-down • High Speed Parallel Pull-up • Pull-down • Open Collector Pull-up
•••••••
DFM1412
Pin #1
15 Schematic
DFM1415 (M8340103xxxxxxJ)
14 R1 R2 R1 1R2 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R1 R2
12 pairs of resistors The DFM1415 provides the user with a choice of 12 pairs of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements.
DFM1415
CAGE CODE: 91637
www.vishay.com 332
For technical questions, contact: ff2aresistors@vishay.com
Document Number: 31517 Revision: 08-Jul-08
DFM (Military M83401)
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ030, Schematics A (11), B (12), J (15)
PERFORMANCE
TEST CONDITIONS 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h ± 4 h at + 25 °C ambient temperature 5 cycles between - 65 °C and + 125 °C MAX. ΔR (Typical Test Lots) ± 0.50 % ΔR ± 0.50 % ΔR ± 0.25 % ΔR (Char. K) ± 0.50 % ΔR (Char. M) ± 0.25 % ΔR (Char. K) ± 0.50 % ΔR (Char. M) ± 0.50 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.25 % ΔR ± 0.50 % ΔR (Char. K) ± 2.0 % ΔR (Char. M) ± 0.25 % ΔR
Vishay Dale
Power Conditioning
Thermal Shock
Short Time Overload
2.5 x rated working voltage for 5 s
Low Temperature Operation
45 min at full rated working voltage at - 65 °C
Moisture Resistance
240 h with humidity ranging from 80 % RH to 98 % RH
Resistance to Soldering Heat
Leads immersed in + 260 °C solder to within 1/16" of body for 10 s
Shock
Total of 18 shocks at 100 g's
Vibration
12 h at maximum of 20 g's between 10 and 2000 Hz 1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” for full 1000 h period 1.5 pound pull for 30 s 10 000 MΩ (minimum)
Load Life
Terminal Strength
Insulation Resistance
-
Dielectric Withstanding Voltage
No evidence of arcing or damage (200 V RMS for 1 min)
-
Document Number: 31517 Revision: 08-Jul-08
For technical questions, contact: ff2aresistors@vishay.com
www.vishay.com 333
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1
