MAL219632334E3

196 DLC Vishay BCcomponents Double Layer Capacitors FEATURES • Polarized capacitor with high charge density, alternative product to rechargeable backup batteries RoHS COMPLIANT Form B • Dielectric: electric double layer • Radial leads, cylindrical case, insulated with a blue vinyl sleeve • Available in both vertical and low-profile versions • Unlimited charge and discharge cycle numbers • No charge-discharge control circuitry and no series resistor necessary • Maintenance-free, no periodic replacement or service necessary • Ecologically beneficial (no Cd, no Li) • Lead (Pb)-free versions are RoHS compliant Form A APPLICATIONS Fig.1 Component outline • Energy storage, for backup of semiconductor memories (CMOS) in all fields of electronics • Telecommunication, audio-video, EDP • General industrial, clock and timer systems MARKING The capacitors are marked with the following information: • Rated capacitance (in F) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Name of manufacturer • Negative terminal identification • Upper category temperature (at 85 °C types only) QUICK REFERENCE DATA VALUE DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR at 20 °C Rated voltage, UR Maximum surge voltage, US Category temperature range Useful life at UR: at 85 °C at 70 °C at 40 °C at 25 °C Shelf life at 0 V Climatic category IEC 60068 www.vishay.com 162 25/070/21 1000 hours 8000 hours 23 000 hours 1000 hours 8000 hours 23 000 hours 25/070/21 1000 hours 2800 hours 23 000 hours 64 000 hours 25/085/21 1000 hours 8000 hours 23 000 hours 25/070/21 Document Number: 28362 Revision: 15-Apr-08 5.5 V 6.3 V - 25 to + 70 °C 6.3 V 7.0 V - 25 to + 70 °C STANDARD FORM A 13 x 7 and 21 x 7.5 0.047 to 1.0 F HIGH VOLTAGE FORM A 13 x 9 and 21 x 9 0.047 to 0.68 F HIGH TEMPERATURE FORM A 13 x 9 and 21 x 9 0.047 to 0.68 F 5.5 V 6.3 V - 25 to + 85 °C VERTICAL, MINIATURIZED FORM B 11.5 x 13 (vertical) 0.047 to 0.33 F 5.5 V 6.3 V - 25 to + 70 °C - 20 to + 80 % 1000 hours at upper category temperature For technical questions contact: aluminumcaps1@vishay.com 196 DLC Double Layer Capacitors Vishay BCcomponents SELECTION CHART FOR CR, UR AND FORM AT UPPER CATEGORY TEMPERATURE (UCT) CR (F) 0.047 0.1 0.22 0.33 0.47 0.68 1.0 FORM A B A B A B A B A B A B A UR = 5.5 V UCT = 85 °C 13 x 9 13 x 9 21 x 9 21 x 9 UCT = 70 °C 13 x 7 11.5 x 13 13 x 7 11.5 x 13 13 x 7 11.5 x 13 13 x 7 11.5 x 13 21 x 7.5 21 x 7.5 UR = 6.3 V UCT = 70 °C 13 x 9 13 x 9 21 x 9 21 x 9 - DIMENSIONS in millimeters AND AVAILABLE FORMS vinyl sleeve 5 ± 0.1 0.8 ± 0.1 1.2 ± 0.1 5 ± 0.3 6±1 ØD L 6±1 Fig.2 FormA: Low profile ØD (4.5) L laser weld vinyl sleeve + 4.0 ± 0.3 solder plating (0.8) 5.0 ± 0.5 5.0 ± 0.3 Fig.3 Form B: Vertical DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE Ø D x L (mm) 11.5 x 13 13 x 7 13 x 9 21 x 7.5 21 x 9 CASE CODE 1 2 3 4 5 FORM B A A A A Ø Dmax. 11.8 13.5 13.5 21.5 21.5 Lmax. 13.5 7.5 9.5 8.0 9.5 MASS (g) ≈ 1.5 ≈ 2.8 ≈ 3.4 ≈ 7.1 ≈ 8.8 PACKAGING QUANTITIES 2000 1000 1000 500 500 Note Detailed tape dimensions see section ‘PACKAGING’ Document Number: 28362 Revision: 15-Apr-08 For technical questions contact: aluminumcaps1@vishay.com www.vishay.com 163 196 DLC Vishay BCcomponents Double Layer Capacitors ELECTRICAL DATA SYMBOL CR UCT IL RI Note Unless otherwise specified, all electrical values in Table 1 apply at Tamb = 20 °C, P = 86 to 106 kPa and RH = 45 to 75 %. Table 1 DESCRIPTION rated capacitance, tolerance - 20/+ 80 %, measured by constant current discharge method upper category temperature max. leakage current after 30 minutes at UR max. internal resistance at 1 kHz ORDERING EXAMPLE Double layer capacitor 196 series 1.0 F/5.5 V Nominal case size: Ø 21 x 7.5 mm; Form A Ordering code: MAL219612105E3 Former 12 NC: 2222 196 12105 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR (F) NOMINAL CASE SIZE ØDxL (mm) CASE CODE FORM UCT (°C) IL 30 min. (µA) RI 1 kHz (Ω) ORDERING CODE Standard series 0.047 0.1 0.22 5.5 0.33 0.47 1.0 High temperature series 0.047 0.1 5.5 0.47 0.68 Vertical, miniaturized series 0.047 0.1 5.5 0.22 0.33 High voltage series 0.047 0.1 6.3 0.47 0.68 21 x 9 21 x 9 5 5 A A 70 70 216 260 50 50 MAL219613474E3 MAL219613684E3 13 x 9 13 x 9 3 3 A A 70 70 69 100 300 200 MAL219613473E3 MAL219613104E3 11.5 x 13 11.5 x 13 1 1 B B 70 70 135 182 75 75 MAL219632224E3 MAL219632334E3 11.5 x 13 11.5 x 13 1 1 B B 70 70 69 100 120 75 MAL219632473E3 MAL219632104E3 21 x 9 21 x 9 5 5 A A 85 85 216 260 50 50 MAL219622474E3 MAL219622684E3 13 x 9 13 x 9 3 3 A A 85 85 69 100 300 200 MAL219622473E3 MAL219622104E3 13 x 7 21 x 7.5 21 x 7.5 2 4 4 A A A 70 70 70 182 216 315 75 30 30 MAL219612334E3 MAL219612474E3 MAL219612105E3 13 x 7 13 x 7 13 x 7 2 2 2 A A A 70 70 70 69 100 135 120 75 75 MAL219612473E3 MAL219612104E3 MAL219612224E3 www.vishay.com 164 For technical questions contact: aluminumcaps1@vishay.com Document Number: 28362 Revision: 15-Apr-08 196 DLC Double Layer Capacitors Vishay BCcomponents MEASURING OF CHARACTERISTICS CAPACITANCE (C) Capacitance shall be measured by constant current discharge method. DISCHARGE CURRENT AS A FUNCTION OF RATED CAPACITANCE PARAMETER Rated capacitance, CR Discharge current, ID 0.047 0.1 0.1 0.22 VALUE 0.33 0.47 0.68 1.0 1.0 UNIT F mA LEAKAGE CURRENT (IL) U (V) UR Leakage current shall be measured after 30 minutes application of rated voltage UR: V(V) I L ( μ A ) = -----------–4 10 2.0 V 0 30 min T (s) time Fig.4 Voltage diagram for capacitance measurement RS + 100 Ω + C Capacitance value CR is given by discharge current ID, time T and rated voltage UR, according to the following equation: I D ( mA ) × 10 – 3 × T ( s ) C ( F ) = ------------------------------------------------------UR ( V ) – 2 Fig.7 Test circuit for leakage current A 102 + V C Constant current discharger IL (µA) Curve 1: 1.0 F, 5.5 V Curve 2: 0.47 F, 5.5 V Curve 3: 0.22 F, 5.5 V Cur ve 4: 0.1 F, 5.5 V Cur ve 5: 0.047 F, 5.5 V RS = 100 Ω 10 1 Fig.5 Test circuit for capacitance measurement 2 3 4 5 1 10 20 30 40 50 time (hours) INTERNAL RESISTANCE (RI) AT 1 kHz VC ( V ) R I ( Ω ) = --------------–3 10 1 mA A + C 1 kHz V 1 Fig.8 Typical leakage current as a function of time Fig.6 Test circuit for RI measurement Document Number: 28362 Revision: 15-Apr-08 For technical questions contact: aluminumcaps1@vishay.com www.vishay.com 165 196 DLC Vishay BCcomponents DISCHARGE CHARACTERISTICS Backup time of 196 DLC series capacitors depends on minimum memory holding voltage and discharge current (corresponding with the current consumption of the load). For minimum backup times of standard and vertical miniaturized series see Figs 9 and 10 (charging time ≥ 24 hours). 10 5 backup time (s) 10 4 10 3 1 2 Curve 1: 1.0 F, 5.5 V Curve 2: 0.47 F, 5.5 V Curve 3: 0.22 F, 5.5 V Curve 4: 0.1 F, 5.5 V Curve 5: 0.047 F, 5.5 V Voltage drop from 5.0 to 3.5 V -3 MLB203 Double Layer Capacitors Figure 11 shows the backup time when a 196 DLC capacitor is discharged by a constant resistance (charging time ≥ 24 hours). The horizontal axis shows the initial value of discharge current if 5 V is connected to the capacitor via a fixed series resistor. EXAMPLE: 1 µA CORRESPONDS TO 5 MΩ AND 0.1 µA CORRESPONDS TO 50 MΩ The vertical axis shows that period of time during which the voltage drops from 5 to 2 V. MGA695 10 3 backup time (s) 102 1 2 Curve 1: 1.0 F, 5.5 V Curve 2: 0.47 F, 5.5 V Curve 3: 0.22 F, 5.5 V Curve 4: 0.1 F, 5.5 V Curve 5: 0.047 F, 5.5 V Voltage drop from 5.0 to 2.0 V by means of a fixed resistor 10-2 10-1 1 3 4 5 3 4 5 10 2 10 10 10 -2 10 -1 10 1 discharge current (mA) 10 Fig.9 Typical backup time as a function of discharge current 10 6 backup time (s) 10 5 MGA696 1 10 102 103 initial value discharge current (mA) Fig.11 Typical backup time as a function of initial discharge current 10 4 Curve 1: 1.0 F, 5.5 V Curve 2: 0.47 F, 5.5 V Curve 3: 0.22 F, 5.5 V Curve 4: 0.1 F, 5.5 V Curve 5: 0.047 F, 5.5 V Voltage drop: from 5.0 to 2.0 V 10-2 10-1 1 2 3 4 5 1 10 discharge current (mA) 10 3 104 10-3 Fig.10 Typical backup time as a function of discharge current www.vishay.com 166 For technical questions contact: aluminumcaps1@vishay.com Document Number: 28362 Revision: 15-Apr-08 196 DLC Double Layer Capacitors Vishay BCcomponents Table 2 TEST PROCEDURES AND REQUIREMENTS for standard and vertical miniaturized series (5.5 V; 70 °C) NAME OF TEST Robustness of terminations 4.4 IEC 60384-4/ EN130300 subclause PROCEDURE (quick reference) tensile strength; application of loading force for 10 seconds: 20 N (standard series) 5 N (vertical miniaturized series) Resistance to soldering heat Solderability Vibration Damp heat, steady state Endurance 4.13 Storage at upper category temperature Self discharge Characteristics at high and low temperature 4.19 4.5 4.6 4.8 solder bath; 260 °C; 5 seconds solder bath; 235 °C; 2 seconds 10 to 55 Hz; 1.5 mm; 3 directions; 2 hours per direction 500 hours at 55 °C; RH 90 to 95 %; no voltage applied Tamb = 70 °C; 5.5 V applied; 1000 hours Tamb = 70 °C; no voltage applied; 1000 hours 24 hours storage at room temperature after application of 5 V for 1 hour step 1: reference measurement at + 20 °C of C, RI and IL step 2: measurement at - 25 °C step 3: measurement at + 20 °C step 4: measurement at + 70 °C step 5: measurement at + 20 °C ΔC/C: ± 10 % RI and IL ≤ spec. limit ≥ 75 % tinning ΔC/C: ± 10 % RI and IL ≤ spec. limit ΔC/C: ± 30 % RI ≤ 4 x spec. limit IL ≤ 2 x spec. limit ΔC/C: ± 30 % RI ≤ 4 x spec. limit IL ≤ 2 x spec. limit ΔC/C: ± 30 % RI ≤ 4 x spec. limit IL ≤ 2 x spec. limit remaining voltage: ≥ 4 V no breaks REQUIREMENTS 4.12 4.17 - ΔC/C: ± 30 % of + 20 °C value RI ≤ 5 x the + 20 °C value IL ≤ 4 x the + 20 °C value Document Number: 28362 Revision: 15-Apr-08 For technical questions contact: aluminumcaps1@vishay.com www.vishay.com 167 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1