MBR1100TR

MBR1100 Vishay High Power Products Schottky Rectifier, 1 A FEATURES • Low profile, axial leaded outline • Very low forward voltage drop • High frequency operation Cathode Anode • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability DO-204AL • Lead (Pb)-free plating • Designed and qualified for industrial level PRODUCT SUMMARY IF(AV) VR 1A 100 V DESCRIPTION The MBR1100 axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 µs sine 1 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform VALUES 1.0 100 200 0.68 - 40 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM MBR1100 100 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 4 Maximum peak one cycle non-repetitive surge current See fig. 6 Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) TEST CONDITIONS 50 % duty cycle at TC = 85 °C, rectangular waveform 5 µs sine or 3 µs rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR TJ = 25 °C, IAS = 0.5 A, L = 8 mH Current decaying linearly to zero in 1 µs Frequency limited by, TJ maximum VA = 1.5 x VR typical Following any rated load condition and with rated VRRM applied VALUES 10 200 50 1.0 0.5 mJ A A UNITS Document Number: 93438 Revision: 06-Nov-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 MBR1100 Vishay High Power Products ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 1A Maximum forward voltage drop See fig. 1 VFM (1) 2A 1A 2A Maximum reverse leakage current See fig. 2 Typical junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % IRM (1) CT LS dV/dt TJ = 25 °C TJ = 125 °C TEST CONDITIONS TJ = 25 °C VALUES 0.85 0.96 0.68 0.78 0.5 1.0 35 8.0 10 000 mA pF nH V/µs V UNITS Schottky Rectifier, 1 A TJ = 125 °C VR = Rated VR VR = 5 VDC, (test signal range 100 kHz to 1 MHz) 25 °C Measured lead to lead 5 mm from package body Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to lead Approximate weight Marking device Notes (1) (2) SYMBOL TJ (1), TStg RthJL (2) DC operation See fig. 4 TEST CONDITIONS VALUES - 40 to 150 80 0.33 0.012 UNITS °C °C/W g oz. Case style DO-204AL (DO-41) (JEDEC) MBR1100 dP tot 1 ------------ < ------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Mounted 1" square PCB, thermal probe connected to lead 2 mm from package www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 93438 Revision: 06-Nov-08 MBR1100 Schottky Rectifier, 1 A Vishay High Power Products 10 Junction Capacitance - CT (pF) 100 T = 25˚C J Instantaneous Forward Current - IF (A) TJ = 150˚C TJ = 125˚C 10 0 20 40 60 80 100 Reverse Voltage - VR (V) 1 TJ = 25˚C Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Allowable Case Temperature (°C) 160 140 120 100 80 60 Square wave (D = 0.50) 80% Rated Vr applied DC 40 20 see note (1) 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 F(AV) 0.1 0 0.4 0.8 1.2 1.6 Forward Voltage Drop - VFM (V) Average Forward Current - I (A) Fig. 1 - Maximum Forward Voltage Drop Characteristics 10 Reverse Current - I R (mA) Fig. 4 - Maximum Allowable Case Temperature vs. Average Forward Current 1 1 0.1 T J = 150˚C Average Power Loss (Watts) 0.8 0.6 RMS Limit 125˚C 0.01 0.001 25˚C 0.4 0.2 0 0.0001 0 0 20 40 60 80 100 Reverse Voltage - VR (V) D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC DC 0 0.5 1 F(AV) 1.5 (A) Average Forward Current - I Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Fig. 5 - Forward Power Loss Characteristics (1) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR Document Number: 93438 Revision: 06-Nov-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 MBR1100 Vishay High Power Products Schottky Rectifier, 1 A Non-Repetitive Surge Current - I (A) FSM 1000 100 At Any Rated Load Condition And With rated Vrrm Applied Following Surge 10 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 6 - Maximum Non-Repetitive Surge Current ORDERING INFORMATION TABLE Device code MBR 1 1 2 3 4 - 1 2 100 3 TR 4 Schottky MBR series Current rating: 1 = 1 A Voltage rating: 100 = 100 V TR = Tape and reel package (5000 pcs) None = Box package (1000 pcs) LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95241 http://www.vishay.com/doc?95304 http://www.vishay.com/doc?95308 www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93438 Revision: 06-Nov-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1