MBR1560CT

MBR(F,B)1535CT thru MBR(F,B)1560CT Vishay General Semiconductor Dual Common-Cathode Schottky Rectifier TO-220AB ITO-220AB FEATURES • Guardring for overvoltage protection • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability 2 MBR15xxCT PIN 1 PIN 3 PIN 2 CASE 3 1 MBRF15xxCT PIN 1 PIN 3 PIN 2 2 3 • High frequency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AB and ITO-220AB package) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 1 TO-263AB K 2 1 MBRB15xxCT PIN 1 PIN 2 K HEATSINK TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM VF TJ max. 7.5 A x 2 35 V to 60 V 150 A 0.57 V, 0.65 V 150 °C Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TC = 105 °C total device per diode SYMBOL MBR1535CT MBR1545CT MBR1550CT MBR1560CT VRRM VRWM VDC IF(AV) IFSM IRRM dV/dt TJ 1.0 10 000 - 65 to + 150 35 35 35 45 45 45 15 7.5 150 0.5 50 50 50 60 60 60 UNIT V V V A A A V/µs °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Peak repetitive reverse surge current per diode at tp = 2.0 µs, 1 kHz Voltage rate of change (rated VR) Operating junction temperature range Document Number: 88670 Revision: 08-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 MBR(F,B)1535CT thru MBR(F,B)1560CT Vishay General Semiconductor MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER Storage temperature range Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min SYMBOL MBR1535CT MBR1545CT MBR1550CT MBR1560CT TSTG VAC - 65 to + 175 1500 UNIT °C V ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage per diode (1) TEST CONDITIONS IF = 7.5 A IF = 7.5 A IF = 1 5 A IF = 1 5 A TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C SYMBOL MBR1535CT MBR1545CT MBR1550CT MBR1560CT 0.57 0.84 0.72 0.1 15 0.75 0.65 1.0 50 UNIT VF V Maximum instantaneous reverse current at rated DC blocking voltage per diode (1) Note: IR mA (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Maximum thermal resistance per diode SYMBOL RθJA RθJC MBR 60 3.0 MBRF 5.0 MBRB 60 3.0 UNIT °C/W ORDERING INFORMATION (Example) PACKAGE TO-220AB ITO-220AB TO-263AB TO-263AB TO-220AB ITO-220AB TO-263AB TO-263AB Note: (1) Automotive grade AEC Q101 qualified PREFERRED P/N MBR1545CT-E3/45 MBRF1545CT-E3/45 MBRB1545CT-E3/45 MBRB1545CT-E3/81 MBR1545CTHE3/45 (1) MBRF1545CTHE3/45 (1) MBRB1545CTHE3/45 (1) MBRB1545CTHE3/81 (1) UNIT WEIGHT (g) 1.85 1.99 1.35 1.35 1.85 1.99 1.35 1.35 PACKAGE CODE 45 45 45 81 45 45 45 81 BASE QUANTITY 50/tube 50/tube 50/tube 800/reel 50/tube 50/tube 50/tube 800/reel DELIVERY MODE Tube Tube Tube Tape reel Tube Tube Tube Tape reel www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88670 Revision: 08-Nov-07 MBR(F,B)1535CT thru MBR(F,B)1560CT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 25 100 Instantaneous Reverse Current (mA) Resistive or Inductive Load Average Forward Current (A) MBR1535CT - MBR1545CT MBR1550CT & MBR1560CT 10 TJ = 125 °C 20 15 1 10 0.1 TJ = 75 °C 5 0.01 TJ = 25 °C 0.001 0 20 40 60 80 100 0 0 50 100 150 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Characteristics Per Diode 175 10 000 Peak Forward Surge Current (A) Junction Capacitance (pF) 150 TJ = TJ Max. 8.3 ms Single Half Sine-Wave TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 125 100 75 100 50 MBR1535CT - MBR1545CT MBR1550CT & MBR1560CT 10 25 1 10 100 0.1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 100 10 TJ = 125 °C Pulse Width = 300 µs 1 % Duty Cycle TJ = 25 °C Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 10 1 1 0.1 MBR1535CT - MBR1545CT MBR1550CT & MBR1560CT 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode Document Number: 88670 Revision: 08-Nov-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 MBR(F,B)1535CT thru MBR(F,B)1560CT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 3 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 45° REF. 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.076 (1.93) REF. 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.135 (3.43) DIA. 0.122 (3.08) DIA. ITO-220AB 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.600 (15.24) 0.580 (14.73) PIN 0.671 (17.04) 0.651 (16.54) 7° REF. 0.350 (8.89) 0.330 (8.38) 1 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) PIN 2 1 2 3 7° REF. 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.191 (4.85) 0.171 (4.35) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.055 (1.40) 0.047 (1.19) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) 0.33 (8.38) MIN. 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88670 Revision: 08-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1