MBR20100CTGTLPBF

VS-MBRB20...CTGPbF, VS-MBR20...CTG-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 10 A VS-MBRB20...CTGPbF VS-MBR20...CTG-1PbF FEATURES • 150 °C TJ operation • Center tap D2PAK and TO-262 packages • Low forward voltage drop • High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • High frequency operation • Guard ring enhanced ruggedness and long term reliability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Halogen-free according to IEC 61249-2-21 definition • Compliant to RoHS directive 2002/95/EC • AEC-Q101 qualified Base common cathode 2 Base common cathode 2 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode D2PAK TO-262 PRODUCT SUMMARY IF(AV) VR 2 x 10 A 80 V to 100 V DESCRIPTION This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL IFRM VRRM IFSM VF TJ tp = 5 μs sine 10 Apk, TJ = 125 °C Range CHARACTERISTICS TC = 133 °C (per leg) VALUES 20 80 to 100 850 0.70 - 65 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR 80 VRWM 90 100 V VS-MBRB2080CTGPbF VS-MBRB2090CTGPbF VS-MBRB20100CTGPbF VS-MBR2080CTG-1PbF VS-MBR2090CTG-1PbF VS-MBR20100CTG-1PbF UNITS Document Number: 94517 Revision: 16-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 1 VS-MBRB20...CTGPbF, VS-MBR20...CTG-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 10 A ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current per leg per device SYMBOL IF(AV) IFRM TEST CONDITIONS TC = 133 °C, rated VR Rated VR, square wave, 20 kHz TC = 133 °C 5 μs sine or 3 μs rect. pulse Following any rated load condition and with rated VRRM applied VALUES 10 20 20 850 150 0.5 24 mJ A UNITS Peak repetitive forward current per leg Non-repetitive peak surge current IFSM Surge applied at rated load conditions half wave, single phase, 60 Hz 2.0 μs, 1.0 kHz TJ = 25 °C, IAS = 2 A, L = 12 mH Peak repetitive reverse surge current Non-repetitive avalanche energy per leg IRRM EAS ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 10 A Maximum forward voltage drop VFM (1) 20 A 10 A 20 A Maximum instantaneous reverse current Threshold voltage Forward slope resistance Maximum junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 μs, duty cycle < 2 % IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 °C TJ = 125 °C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured from top of terminal to mounting plane Rated VR TEST CONDITIONS TJ = 25 °C TJ = 125 °C VR = Rated VR VALUES 0.80 0.95 0.70 0.85 0.10 6 0.433 15.8 400 8.0 10 000 mA V mΩ pF nH V/μs V UNITS THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to case per leg Maximum thermal resistance junction to ambient Approximate weight Mounting torque minimum maximum Non-lubricated threads SYMBOL TJ TStg RthJC DC operation RthJA 50 2 0.07 6 (5) 12 (10) g oz. kgf · cm (lbf · in) TEST CONDITIONS VALUES - 65 to 150 - 65 to 175 2.0 °C/W UNITS °C MBRB2080CTG Case style D2PAK Marking device Case style TO-262 MBRB2090CTG MBRB20100CTG MBR2080CTG-1 MBR2090CTG-1 MBR20100CTG-1 www.vishay.com 2 For technical questions, contact: diodestech@vishay.com Document Number: 94517 Revision: 16-Mar-10 VS-MBRB20...CTGPbF, VS-MBR20...CTG-1PbF Series Schottky Rectifier, 2 x 10 A Vishay High Power Products IF - Instantaneous Forward Current (A) 100 100 IR - Reverse Current (mA) 10 1 0.1 0.01 0.001 TJ = 150 °C TJ = 125 °C TJ = 100 °C TJ = 75 °C TJ = 50 °C TJ = 25 °C 10 TJ = 150 °C TJ = 125 °C TJ = 25 °C 1 0.2 0.0001 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 94517_02 0 20 40 60 80 100 94517_01 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) 1000 CT - Junction Capacitance (pF) TJ = 25 °C 100 10 0 94517_03 20 40 60 80 100 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) ZthJC - Thermal Impedance (°C/W) 10 1 PDM 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 t1 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 0.01 94517_04 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94517 Revision: 16-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 3 VS-MBRB20...CTGPbF, VS-MBR20...CTG-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 10 A 150 10 RMS limit Allowable Case Temperature (°C) Average Power Loss (W) DC 140 8 130 6 120 Square wave (D = 0.50) Rated VR applied See note (1) 100 0 2 4 6 8 10 12 14 16 4 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC 110 2 0 0 94517_06 2 4 6 8 10 12 14 16 94517_05 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 94517_07 tp - Square Wave Pulse Duration (μs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) (1) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions, contact: diodestech@vishay.com Document Number: 94517 Revision: 16-Mar-10 VS-MBRB20...CTGPbF, VS-MBR20...CTG-1PbF Series Schottky Rectifier, 2 x 10 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS- MBR 1 1 2 3 4 5 6 7 8 9 2 B 3 20 4 100 5 CT 6 G 7 -1 8 TL 9 PbF 10 HPP product suffix Essential part number B = D2PAK None = TO-262 Current rating (20 = 20 A) Voltage ratings CT = Essential part number G = Schottky generation None = D2PAK -1 = TO-262 None = Tube (50 pieces) TL = Tape and reel (left oriented - for D2PAK only) TR = Tape and reel (right oriented - for D2PAK only) 10 PbF = Lead (Pb)-free (for D2PAK tube) P = Lead (Pb)-free (for D2PAK TL/TR, and TO-262) LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information www.vishay.com/doc?95014 www.vishay.com/doc?95008 www.vishay.com/doc?95032 80 = 80 V 90 = 90 V 100 = 100 V Document Number: 94517 Revision: 16-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 5 Outline Dimensions Vishay High Power Products D2PAK, TO-262 DIMENSIONS FOR D2PAK in millimeters and inches Conforms to JEDEC outline D2PAK (SMD-220) (2)(3) E (3) L1 4 (D1) (3) D H 1 L2 B B A 2 x b2 2xb 0.010 M A M B 2x e Gauge plane 0° to 8° Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode Lead tip L3 L L4 Detail “A” Rotated 90 °CW Scale: 8:1 A1 B Seating plane (b, b2) Section B - B and C - C Scale: None (c) c1 (4) ± 0.004 M B H C c E1 View A - A Plating (4) b1, b3 Base Metal (3) 2.64 (0.103) 2.41 (0.096) 2.32 MIN. (0.08) 2 3 (2) Detail A 17.90 (0.70) 15.00 (0.625) 3.81 MIN. (0.15) 9.65 MIN. (0.38) A A c2 A (E) B Pad layout 11.00 MIN. (0.43) SYMBOL A A1 b b1 b2 b3 c c1 c2 D MILLIMETERS MIN. 4.06 0.00 0.51 0.51 1.14 1.14 0.38 0.38 1.14 8.51 MAX. 4.83 0.254 0.99 0.89 1.78 1.73 0.74 0.58 1.65 9.65 INCHES MIN. 0.160 0.000 0.020 0.020 0.045 0.045 0.015 0.015 0.045 0.335 MAX. 0.190 0.010 0.039 0.035 0.070 0.068 0.029 0.023 0.065 0.380 NOTES SYMBOL D1 E E1 MILLIMETERS MIN. 6.86 9.65 7.90 14.61 1.78 1.27 4.78 MAX. 8.00 10.67 8.80 15.88 2.79 1.65 1.78 5.28 INCHES MIN. 0.270 0.380 0.311 0.575 0.070 0.050 0.188 MAX. 0.315 0.420 0.346 0.625 0.110 0.066 0.070 0.208 NOTES 3 2, 3 3 4 4 4 2 (7) e H L L1 L2 L3 L4 2.54 BSC 0.100 BSC 3 0.25 BSC 0.010 BSC Notes (1) Dimensioning and tolerancing per ASME Y14.5 M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Datum A and B to be determined at datum plane H (6) Controlling dimension: inch Document Number: 95014 Revision: 31-Mar-09 Outline conforms to JEDEC outline TO-263AB For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com www.vishay.com 1 Outline Dimensions Vishay High Power Products D2PAK, TO-262 DIMENSIONS FOR TO-262 in millimeters and inches Modified JEDEC outline TO-262 (Datum A) (2) (3) E A (3) L1 Seating plane 1 L2 23 C C D1 (3) A B A c2 E D B B L (2) 3 x b2 3xb 2xe 0.010 M A M B c A1 A E1 Section A - A Plating (4) b1, b3 Base metal c1 (3) Lead assignments Diodes 1. - Anode (two die)/open (one die) 2., 4. - Cathode 3. - Anode c (4) (b, b2) Section B - B and C - C Scale: None Lead tip SYMBOL A A1 b b1 b2 b3 c c1 c2 D D1 E E1 e L L1 L2 MILLIMETERS MIN. 4.06 2.03 0.51 0.51 1.14 1.14 0.38 0.38 1.14 8.51 6.86 9.65 7.90 2.54 BSC 13.46 3.56 14.10 1.65 3.71 (6) INCHES MAX. 4.83 3.02 0.99 0.89 1.78 1.73 0.74 0.58 1.65 9.65 8.00 10.67 8.80 MIN. 0.160 0.080 0.020 0.020 0.045 0.045 0.015 0.015 0.045 0.335 0.270 0.380 0.311 0.100 BSC 0.530 0.140 0.555 0.065 0.146 MAX. 0.190 0.119 0.039 0.035 0.070 0.068 0.029 0.023 0.065 0.380 0.315 0.420 0.346 NOTES 4 4 4 2 3 2, 3 3 3 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outmost extremes of the plastic body (3) Thermal pad contour optional within dimension E, L1, D1 and E1 (4) Dimension b1 and c1 apply to base metal only (5) Controlling dimension: inches Outline conform to JEDEC TO-262 except A1 (maximum), b (minimum) and D1 (minimum) where dimensions derived the actual package outline www.vishay.com 2 For technical questions concerning discrete products, contact: diodes-tech@vishay.com For technical questions concerning module products, contact: ind-modules@vishay.com Document Number: 95014 Revision: 31-Mar-09 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1