MBR2535CTTRRPBF

VS-MBRB25..CTPbF, VS-MBR25..CT-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 15 A VS-MBRB25..CTPbF VS-MBR25..CT-1PbF FEATURES • • • • • 150 °C TJ operation Center tap D2PAK and TO-262 packages Low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Guard ring for enhanced ruggedness and long term reliability Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Halogen-free according to IEC 61249-2-21 definition Compliant to RoHS directive 2002/95/EC AEC-Q101 qualified Base common cathode 2 Base common cathode 2 • • 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode • • • D2PAK TO-262 DESCRIPTION This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. PRODUCT SUMMARY IF(AV) VR IRM 2 x 15 A 35 V/45 V 40 mA at 125 °C MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) IFRM VRRM IFSM VF TJ tp = 5 μs sine 30 Apk, TJ = 125 °C Range CHARACTERISTICS Rectangular waveform (per device) TC = 130 °C (per leg) VALUES 30 30 35/45 1060 0.73 - 65 to 150 UNITS A V A V °C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM VS-MBRB2535CTPbF VS-MBR2535CT-1PbF 35 VS-MBRB2545CTPbF VS-MBR2545CT-1PbF 45 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current per leg per device SYMBOL IF(AV) IFRM TEST CONDITIONS TC = 130 °C, rated VR Rated VR, square wave, 20 kHz, TC = 130 °C 5 μs sine or 3 μs rect. pulse Following any rated load condition and with rated VRRM applied VALUES 15 30 30 1060 A UNITS Peak repetitive forward current per leg Non-repetitive peak surge current IFSM Surge applied at rated load conditions halfwave, single phase, 60 Hz Non-repetitive avalanche energy per leg Repetitive avalanche current per leg EAS IAR TJ = 25 °C, IAS = 2 A, L = 8 mH Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 150 16 2 mJ A Document Number: 94308 Revision: 16-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 1 VS-MBRB25..CTPbF, VS-MBR25..CT-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 15 A ELECTRICAL SPECIFICATIONS PARAMETER Maximum forward voltage drop Maximum instantaneous reverse current Threshold voltage Forward slope resistance Maximum junction capacitance Typical series inductance Maximum voltage rate of change Note (1) Pulse width < 300 μs, duty cycle < 2 % SYMBOL VFM (1) IRM (1) VF(TO) rt CT LS dV/dt 30 A TJ = 25 °C TJ = 125 °C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C Measured from top of terminal to mounting plane Rated VR TEST CONDITIONS TJ = 25 °C TJ = 125 °C Rated DC voltage VALUES 0.82 0.73 0.2 40 0.355 12.3 700 8.0 10 000 UNITS V mA V mΩ pF nH V/μs THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to case per leg Typical thermal resistance, case to heatsink Approximate weight minimum maximum SYMBOL TJ TStg RthJC RthCS DC operation Mounting surface, smooth and greased TEST CONDITIONS VALUES - 65 to 150 - 65 to 175 1.5 °C/W 0.50 2 0.07 Non-lubricated threads Case style D2PAK Case style TO-262 6 (5) 12 (10) g oz. kgf · cm (lbf · in) UNITS °C Mounting torque Marking device MBRB2545CT MBR2545CT-1 www.vishay.com 2 For technical questions, contact: diodestech@vishay.com Document Number: 94308 Revision: 16-Mar-10 VS-MBRB25..CTPbF, VS-MBR25..CT-1PbF Series Schottky Rectifier, 2 x 15 A Vishay High Power Products 100 100 IR - Reverse Current (mA) 10 1 0.1 0.01 TJ = 150 °C TJ = 125 °C TJ = 100 °C TJ = 75 °C TJ = 50 °C IF - Instantaneous Forward Current (A) 10 TJ = 150 °C TJ = 125 °C TJ = 25 °C 0.001 0.0001 TJ = 25 °C 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 5 10 15 20 25 30 35 40 45 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) 1000 VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) TJ = 25 °C 100 0 10 20 30 40 50 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) ZthJC - Thermal Impedance (°C/W) 10 1 PDM t1 0.1 Single pulse (thermal resistance) 0.01 0.00001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.001 0.01 0.1 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 1 10 0.0001 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94308 Revision: 16-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 3 VS-MBRB25..CTPbF, VS-MBR25..CT-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 15 A 150 Allowable Case Temperature (°C) 14 140 DC 130 Average Power Loss (W) 12 10 8 6 4 2 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit 120 Square wave (D = 0.50) Rated VR applied DC 110 See note (1) 100 0 4 8 12 16 20 24 0 5 10 15 20 25 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) (1) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions, contact: diodestech@vishay.com Document Number: 94308 Revision: 16-Mar-10 VS-MBRB25..CTPbF, VS-MBR25..CT-1PbF Series Schottky Rectifier, 2 x 15 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS- MBR 1 1 2 3 4 5 6 7 8 2 B 3 25 4 45 5 CT 6 -1 7 TRL PbF 8 9 HPP product suffix Essential part number B = D2PAK 7 None None = TO-262 7 = -1 Current rating (25 = 25 A) Voltage ratings CT = Essential part number None = D2PAK -1 = TO-262 3 3 =B None 35 = 35 V 45 = 45 V None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 9 - PbF = Lead (Pb)-free (for TO-262 and D2PAK tube) P = Lead (Pb)-free (for D2PAK TRR and TRL) LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information www.vishay.com/doc?95014 www.vishay.com/doc?95008 www.vishay.com/doc?95032 Document Number: 94308 Revision: 16-Mar-10 For technical questions, contact: diodestech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1